• Korean Journal of Clinical Laboratory Science
• /
• v.40 no.2
• /
• pp.153-162
• /
• 2008

The main purpose of this study was to investigate relationship between WRMD (Work Related Musculoskeletal Disorders) symptoms and dangerous factors in medical technologistes who work in Gwang-ju city and Jeollanam-do province. Experimental group was 74 medical technologistes at hospital centers, hospitals, general hospitals, university hospitals. From the this survey, we found that significant statistical difference in WRMD symptoms by general characteristics (sex, exercise) and working environmental characteristics (examination numbers, time of margin, repetition, intensity of work, time of using PC). In the general factors, Odds ration in male vs female, do exercise vs do not exercise were 4.557 (95% CI=1.003-20.713), 2.747 (95% CI=0.59-12.783). In working environment factors, Odds ration in little of examination numbers vs a lot of examination numbers, little of time margin vs a lot of time margin, non repetitive vs repetitive, non intensity of work vs intensity of work, little of pc using time vs a lot of pc using time were 1.901 (95% CI=0.828-4.363), 1.15 (95% CI=0.335-3.944), 3.952 (95% CI=1.095-14.262), 1.411 (95% CI=0252-7.891), 2.606 (95% CI=1.055-6.437) respectively. For prevention of WRMD symptoms, Most of hospitals should improve medical technologists of working circumstances, especially control a intensive of work, working speed and guarantee enough break time. Therefore, This study suggests that increasing workers and examination of automation, streching during working be needed.

• Transactions of Materials Processing
• /
• v.7 no.5
• /
• pp.432-438
• /
• 1998

The process variables i.e. the speed of forming, the ratio of thickness to diameter the shape of formed materials and the reduction of area were selected in order to study the process of the rotary swaging. It was found that the process variables affected the quality of products, i.e. the hardness the surface roughness and the degree of precision of products. Variation of hardness in deformed samples was mainly dependent on the reduction of area. Upon forming tubes applying the t/D ration higher than 1/10 led to the formation of defects on products which may be reduced by application of mandrels.

• Journal of the Korea Convergence Society
• /
• v.4 no.3
• /
• pp.43-50
• /
• 2013

This paper presents a model predictive control (MPC) based on a neural network (NN) model for air/fuel ration (AFR) control of automotive engines. The novelty of the paper is that the severe nonlinearity of the engine dynamics are modelled by a NN to a high precision, and adaptation of the NN model can cope with system uncertainty and time varying effects. A single dimensional optimization algorithm is used in the paper to speed up the optimization so that it can be implemented to the engine fast dynamics. Simulations on a widely used mean value engine model (MVEM) demonstrate effectiveness of the developed method.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.102-108
• /
• 1992

To clarify the structure of a diesel spray, a transient non-evaporating diesel spray injected under different ambient pressure and different injection pressure was studied. Spray tip penet- ration and spray angle were measured by taking the high speed shadowgraph of spray and Sauter mean Diameter(SMD) was also measured by light scattering technique at different positions along the spray axis and at different time from the start of injection. The effects of the operating parameters on the spray shape and SMD were investigated. By increasing the injection pressure, the spray tip penetration and the spray angle increased and the change of the ambient pressure also resulted in the considerable change in the shape of the spray. The analysis of SMD measurement showed that the atomization is a process that continues in sp- ace and time. As the injection pressure increases SMD decreases rapidly and with the increa- se of the ambient pressure the atomization process ends faster than the lower ambient press- ure and at lower pressure the atomization process continues to much farther downstream and far afterward.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.431-434
• /
• 2002

This paper presents an implementation of direct torque control(DTC) of Reluctance Synchronous Motor(RSM) with an efficiency optimization using the 32bit DSP TMS320C31. The influence of iron loss can not neglected as high speed and precision torque control of RSM, so the optimal current ration between torque current and exiting current analytically derived to drive RSM at maximum efficiency For RSM, torque dynamics can be maintained even with controlling the flux level because the generated torque is direct]y proportional to the stator current. The experimental results for an RSM are presented to validate the applicability of the proposed method. The developed control system is shown high efficiency features with 1.0Kw RSM having 2.57 ratio of d/q reluctance.

• The Journal of the Korean dental association
• /
• v.10 no.8
• /
• pp.531-534
• /
• 1972

The author measured exothermic temperature of the 5 kinds of zinc phosphate cement and 3 kinds of copper phosphate cement during setting process. Cements were mixed on the glass slab with flexible steel spatula at room temperature (25.8℃) for one minute (spatulating speed was 100 strokes per minute) and placed in the incubator of which temperature was held at 37℃ and thermometer was inserted into the cement mass. The powder liquid ration was 3.0gm:1ml and 1.5gm:1ml. The results were as follows. 1) The heat generated after mixing these cements was under 47.22℃. 2) The range of thermal change of the zinc phosphate cements during setting process was wider than copper phosphate cements. 3) The exothermic temperature from the thin mix was higher than thick mix. 4) The exothermic temperature of the zinc phosphate cements was higher than copper phosphate cements.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.4
• /
• pp.639-647
• /
• 1998

This study was carried out to produce the maltooligosaccharides directly from the culture medium containing high concentration of soluble starch as carbohydrate source by Bacillus cereus IAM 1072. Optimum conditions for the production of maltopentaose and maltooligosaccharides were predicted as 10.62 and 10.92 in C/N ration, 115.74 and 116.51 rpm in agitation speed, 30.19 and 30.9$0^{\circ}C$, respectively. And at these conditions, products of maltopentaose and maltooligosaccharides were 23.23 and 50.33g/L, respectively. From the results of continuous culture for maltopentaose, the productivity increased up to 6.9 times, showing 6.6g/L/hr compared with 0.96g/L/hr batch culture. Maltopentaose showed lower sweetness at 3% concentration representing 1/5 of that sugar. Also, swelling power of maltooligosaccharides was reached to the same point with sugar after fermentation.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.269-274
• /
• 2009

The main objective of this study was to establish optimum condition of wet grinding process for manufacturing microparticulated seaweed calcium. Process parameters such as concentration of forming agent, rotor speed, bead size, feed rate, and grinding time were adapted during wet-grinding of seaweed calcium. The particle size range of the raw seaweed calcium was 10-20 $\mu$m. The calcium particles were reduced to under 1 $\mu$m as nano scale after grinding. Gum arabic was suitable for forming agent and 5%(w/v) concentration was the most effective in grinding efficiency. A wet-grinding process operated at 4,000 rpm rotor speed, 0,4 mm bead size, and 0.4 L/hr feeding rate, respectively, produced less than 600 mm(>>90%)-sized particles. In batch systems, 8 cycles of grinding showed higher efficiency, but 20 min of grinding time in continuous processing was more efficient to reduce particle size than the batch processing. Based on the result, the optimum conditions of the wet grinding process were established: operation time of 20 minutes, rotor speed of 4,000 rpm, bead size of 0.4 mm, feed rate of 40 mL/min and 30% mixing ration with water. The size of the resulting ultra fine calcium particles ranged between 40 and 660 mm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.6 s.348
• /
• pp.9-17
• /
• 2006

We proposed a new High-speed CMOS Level Up/Down Shifter circuits that can be used with Dynamic Voltage and Frequency Scaling(DVFS) algorithm, for low power system in the SoC(System-on-Chip). This circuit used to interface between the other voltage levels in each CMOS circuit boundary, or between multiple core voltage levels in a system bus. Proposed circuit have advantage that decrease speed attenuation and duty ratio distortion problems for interface. The level up/down shifter of the proposed circuit designed that operated from multi core voltages$(0.6\sim1.6V)$ to used voltage level for each IP at the 500MHz input frequency The proposed circuit supports level up shifting from the input voltage levels, that are standard I/O voltages 1.8V, 2.5V, 3.3V, to multiple core voltage levels in between of $0.6V\sim1.6V$, that are used internally in the system. And level down shifter reverse operated at 1Ghz input frequency for same condition. Simulations results are shown to verify the proposed function by Hspice simulation, with $0.6V\sim1.6V$ CMOS Process, $0.13{\mu}m$ IBM CMOS Process and $0.65{\mu}m$ CMOS model parameters. Moreover, it is researched delay time, power dissipation and duty ration distortion of the output voltage witch is proportional to the operating frequency for the proposed circuit.

• Journal of Welding and Joining
• /
• v.11 no.1
• /
• pp.52-61
• /
• 1993

Laser welding of ASTM no. 1060 Al plate with a pulsed Nd: YAG laser of 200W average power was performed for end capping of KMRR nuclear fuel elements In this research, we performed basic welding experiments. Firstly, laser output parameters which affect laser welding parameters were studied by changing laser input parameters for effective welding of 1060 Al plates. We found that laser power density and pulse energy are important parameters for smooth bead shape. Secondly, welding parameters which affect weld width-to-depth ratio were studied by changing power density and pulse energy, shielding gas, and defocusing. We found that power density must be higher than 0.3 Mw/cm$^{2}$ pulse energy must be higer than 3 J. travel speed must not exceed 200mm/sec, laser focus must be existed beneath 2-3mm from plate surface and helium is proper shielding gas. Thirdly, we studied the weld defects of Al-1060 such as crack and porosity in lap-joint welding. We designed new welding geometry for crack free welding of Al-1060 plates, and obtained crack free weldment but with lack of fusion. However, with Ti, Zr grain refiner elements, we can weld Al plates without solidification hot crack. Finally, we studied the origin of porosity by changing shielding gas. And we found that porosity was resulted from entrapment of shielding gas by the collapsing keyhole.