• Journal of the Korean Solar Energy Society
• /
• v.36 no.1
• /
• pp.49-61
• /
• 2016

The power production using hub height wind speed tends to be overestimated than actual power production. It is because the hub height wind speed cannot represent vertical wind shear and blade tip loss that aerodynamics characteristic on the wind turbine. The commercial CFD model WindSim is used to compare and analyze each power production. A classification of atmospheric stability is accomplished by Monin-Obukhov length. The concentric wind speed constantly represents low value than horizontal equivalent wind speed or hub height wind speed, and also relevant to power production. The difference between hub height wind speed and concentric equivalent wind speed is higher in nighttime than daytime. Under the strongly convective state, power production is lower than under the stable state, especially using the concentric equivalent wind speed. Using the concentric equivalent wind speed considering vertical wind shear and blade tip loss is well estimated to decide suitable area for constructing wind farm.

• Korean Journal of Agricultural Science
• /
• v.33 no.2
• /
• pp.159-166
• /
• 2006

Threshing loss was increased due to dropping of the threshing efficiency when the 4 row head-feed combine harvested 5 row rice to improve harvesting performance of a combine. Reasonable design criteria were examined to determine the ranges of both of feed rate and the length of threshing drum for the 4 row head-feed combine being used as a 5-row combine. Harvesting performance increased as working width or working speed increased, it resulted in 15% increase when the working width increased from 4 row to 5 row. Harvesting operations of the 4 row combine performed normally in the 4 row rice in threshing loss less than 1%, however, threshing loss increased to 2.25% in the 5 row due to poor threshing efficiency. The length of threshing drum was increased from 710 mm to 810 mm as well as the speed of crop feed chain was increased from 0.61 m/s to 0.75 m/s so as to improve the poor threshing efficiency resulted from the enlarged working width from the 4 row to the 5 row, which would decrease threshing loss less than 1%.

• Journal of Power System Engineering
• /
• v.18 no.2
• /
• pp.50-56
• /
• 2014

Friction welding is a very useful joining process to weld metals which have axially symmetric cross section. In this paper, for the friction welding with tube-to-tube shape, the feasibility of industry application was determined using analyzing mechanical properties of weld and optimized welding variables was suggested. In order to accomplish this object, rotating speed, friction heating pressure, and friction heating time were selected as the major process variables and the experiment was performed in three levels of each parameter. Weld characteristic was investigated in terms of weld shape and metal loss, and 7mm of metal loss was regarded as the optimal metal loss. By tensile test, tensile strength and yielding strength was measured and fracture was occurred at base metal. In order to optimize the welding condition, fitness function was defined with respect to metal loss and yielding strength and the fitness values for each welding condition could be calculated in experimental range. Consequently, we set the optimal welding condition as the point which had maximum value of fitness function. As the result of this paper the optimal welding variables could be suggested as rotating speed was 1300 rpm, friction heating pressure was 15 MPa, and friction heating time was 10 sec.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.315-317
• /
• 2007

This paper proposes a loss minimization algorithm for doubly-fed induction generator (DFIG) by controlling the stator reactive power. The proposed strategy directly controls the rotor current to achieve the operating point of minimum generator loss and maximum power point tracking. The maximum power is obtained by tracking the q-axis rotor current with generator speed variation and the minimum generator loss is achieved by controlling the d-axis rotor current. Experimental results are shown to verify the validity of the proposed scheme.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.807-815
• /
• 2012

In this paper, we propose a scheme for partially dynamic lane control for energy saving in multilane-based high-speed Ethernet. In this scheme, among the given transmission lanes, at least one lane is always operating, and the remaining lanes are dynamically activated to alleviate the network performance in terms of queuing delay and packet loss in the range of acceptance. The number of active lanes is determined by the decision algorithm based on the information regarding traffic and queue status. The reconciliation sublayer adjusts the transmission lane with the updated number of lanes received from the algorithm, which guarantees no processing delay in the media access control layer, no overhead, and minimal delay of the exchanging control frames. The proposed scheme is simulated in terms of queuing delay, packet loss rate, lane changes, and energy saving using an OPNET simulator. Our results indicate that energy savings of around 55% (or, when the offered load is less than 0.25, a significant additional savings of up to 75%) can be obtained with a queuing delay of less than 1 ms, a packet loss of less than $10^{-4}$, and a control packet exchange time of less than $0.5{\mu}s$ in random traffic.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.729-735
• /
• 2000

Moisture loss of fresh fruits and vegetables is a main cause of deterioration. It resulted not only in the direct quantitative loss, but also in change in appearance, texture and nutrition. To reduce the loss of moisture content during the distribution in the market, fresh products are packaged using plastic films. But, most of the fresh products are packaged manually in Korea. In order to minimize the labor requirement, the packaging machine for fruits and vegetables was developed and tested. Prototype was composed of film feeding unit, bag former, products feeding conveyor, film feeding roller, center sealer, end sealer and discharge conveyor. Green peppers, carrots and perilla leaves were tested with prototype. Prototype could pack 1780, 1390, 1780 bags per hour at the feeding speed of 0.08m/s respectively and 2250, 1810, 2640bags per hour at the feeding speed of 0.10m/s respectively. And packaging speed of green peppers and carrots was improved by 3.7 and 3.4 times compared with manual packaging. The packaging condition with the prototype was good and the products had almost no damages.

• Proceedings of the KIEE Conference
• /
• 2009.04a
• /
• pp.10-12
• /
• 2009

Electromagnetic Interference(EMI) in electric railway operation has become increasingly important. The components within very high power electronic, and the circuits for treating low-level signals, comprise complex system that must coexist and be highly reliable. To study it, It were included how much the HEMU-400X generates EMI and it has an effect on the power conversion units which resulted from Power Line Disturbance (PLD) phenomenon by contact loss during its running. In this study, the dynamic characteristic of a contact wire and pantograph suppling electrical power to high-speed trains are investigated. The analysis of the loss of contact based on Power Simulator program software is performed to develop power line disturbance model suitable for high speed operation. It is confirmed that a contact wire and pantograph model are necessary for studying the dynamic behavior of the pantograph system.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.119-125
• /
• 2014

Echo cancellation is required for a dual-duplex high speed communication such as digital subscriber line(DSL), in order to allow each individual loop to operate in a full duplex fashion. Echo cancellation was one of the most difficult aspects of DSL design, requiring high linearity and total echo return loss in excess of 70 dB. For a long and rapidly changing echo response, if the echo is cancelled by an adaptive echo canceller, the echo canceller needs more taps and its performance is decreased. But if the response is divided into several responses, which response is estimated by a adaptive digital filter and combined, the computation complexities are decreased and the performance is increased. Therefore, the adaptive multi-stage echo canceller is proposed to decrease the computation complexity and increase the performance of echo return loss, in which the echo canceller is composed of several stage echo canceller estimating each divided echo response. Through computer simulations, this multi-stage echo canceller is verified to have merits for high speed communications such as DSL application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11B
• /
• pp.1225-1233
• /
• 2009

ISPs and Enterprises are equipping their networks with sufficiently high speed facilities and provide large bandwidths members. However the high speed enterprise network does not have satisfying end-to-end network performance within the network in spite of under utilization. The root cause of this performance degradation is a micro-congestion, which is a short-live event of traffic congestion. A micro-congestion causes packet loss, delay and packet reodering, and finally results in end-to-end network performance degradation. In this paper, we propose a micro-congestion detection method and find out the characteristics of performance degradation by analyzing traffic archives which is collected from a network link when a micro-congestion occurs.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.211-214
• /
• 2005

There are emerging many eScience applications. More and more scientists want to collaborate on their investigation with international partners without space limitation by using these applications. Since these applications have to analyze the massive raw data, scientists need to send and receive the data in short time. So today's network related requirement is high speed networking. The key point of network performance is transport protocol. We can use TCP and UDP as transport protocol but we use TCP due to the data reliability. However, TCP was designed under low bandwidth network, therefore, general TCP, for example Reno, cannot utilize the whole bandwidth of high capacity network. There are several TCP variants to solve TCP problems related to high speed networking. They can be classified into two groups: loss based TCP and delay based TCP. In this paper, I will compare two approaches of TCP variants and propose a hybrid approach for high speed networking.