• Journal of the Society of Disaster Information
• /
• v.11 no.4
• /
• pp.570-580
• /
• 2015

In the study, planning indicator that should be considered in applying traffic calming technique was derived, and it was intended to analyze the importance of indicator that should most considered in planning traffic calming technique through AHP analysis on the basis of it. The result of planning indicator may be summarized by dividing into road section and crossing section. In road section, hump (0.35) for equipment stimulating reduction of speed, hump image/fort (0.31) for visual control equipment, and slalom type road (0.52) for chicane, and bollard (0.47) for blocking passing route are shown to be the most important and come before anything. In crossing section, signal indicator (0.33) for visual control equipment, rumble strip (0.44) for equipment stimulating reduction of speed, zigzag type road (0.65) for chicane, and blocking going straight at crossing (0.45) for blocking passing route are shown to be the most important and come before anything. The result of the study is judged to be used for basic material in applying traffic calming technique and establishing policy hereafter.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.107-113
• /
• 2017

This paper deals with the traffic factors related to the collisions of circular intersections. The purpose of this study is to develop traffic accident models by type of collision based on land use. In pursuing the above, the traffic accident data from 2010 to 2014 were collected from the "Traffic Accident Analysis System (TAAS)" data set of the Road Traffic Authority. A multiple regression model was utilized in this study to develop the traffic accident models by type of collision. 17 explanatory variables such as geometry and traffic volume factors were used. The main results are as follows. First, the null hypothesis that the type of land use does not affect the number of accidents by type of collision is rejected. Second, 10 accident models by type of collision based on land use are developed, which are all statistically significant. Finally, the ADT, inscribed circle diameter, bicycle lane, area of central island, number of speed hump, circulatory roadway width, splitter island, area of circulatory roadway, mean number of entry lane and mean width of entry lane are analyzed to see how they affect accident by type of accident based on land use.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.7
• /
• pp.655-663
• /
• 2010

DUP (direct underside pressurization) is a device that can considerably increase lift, reduce take-off speed and minimize hump drag when a WIG effect vehicle takes off on the water surface. A 3-dimensional numerical investigation of a WIG effect vehicle with DUP is performed to analyze aerodynamic characteristics and the static height stability. The model vehicle, named Aircat, consists of a propeller in the middle of a fuselage, an air chamber under the fuselage, Lippisch-type wings and a large horizontal T-tail. The lift is mainly increased by the stagnation of the accelerated air coming into the air chamber through the channel in the middle of the fuselage. However, the accelerated air increases drag as well as reduces static height stability.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.111-118
• /
• 2014

PURPOSES: The purposes are to analyze the pedestrian accident severity and to develop the accident models by arterial road function. METHODS: To analyze the accident, count data and ordered logit models are utilized in this study. In pursuing the above, this study uses pedestrian accident data from 2007 to 2011 in Cheongju. RESULTS : The main results are as follows. First, daytime, Tue.Wed.Thu., over-speeding, male pedestrian over 65 old are selected as the independent variables to increase pedestrian accident severity. Second, as the accident models of main and minor arterial roads, the negative binomial models are developed, which are analyzed to be statistically significant. Third, such the main variables related to pedestrian accidents as traffic and pedestrian volume, road width, number of exit/entry are adopted in the models. Finally, Such the policy guidelines as the installation of pedestrian fence, speed hump and crosswalks with pedestrian refuge area, designated pedestrian zone, and others are suggested for accident reduction. CONCLUSIONS: This study analyzed the pedestrian accident severity, and developed the negative binomial accident models. The results of this study expected to give some implications to the pedestrian safety improvement in Cheongju.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.252-255
• /
• 2004

반도체는 high integrated, high speed, low power를 위하여 design 뿐만 아니라 재료 측면에서도 많은 변화를 가져오고 있으며, RC delay time을 줄이기 위하여 Al 배선보다 비저항이 낮은 Cu와 low-k material 적용이 그 대표적인 예이다. 그러나, Cu 배선의 경우 dry etching이 어려우므로, 기존의 공정으로는 그 한계를 가지므로 damascene 또는 dual damascene 공정이 소개, 적용되고 있다. Damascene 공정은 절연막에 photo와 RIE 공정을 이용하여 trench를 형성시킨 후 electrochemical plating 공정을 이용하여 trench에 Cu를 filling 시킨다. 이후 CMP 공정을 이용하여 절연막 위의 Cu와 barrier material을 제거함으로서 Cu 배선을 형성하게 된다. Dual damascene 공정은 trench와 via를 동시에 형성시키는 기술로 현재 대부분의 Cu 배선 공정에 적용되고 있다. Cu CMP는 기존의 metal CMP와 마찬가지로 oxidizer를 이용한 Cu film의 화학반응과 연마 입자의 기계가공이 기본 메커니즘이다. Cu CMP에서 backside pressure 영향이 uniformity에 미치는 영향을 살펴보았으며, electrochemical plating 공정에서 발생하는 hump가 CMP 결과에 미치는 영향과 dishing 결과를 통하여 그 영향을 평가하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.38-47
• /
• 2020

The partial air cushion supported catamaran (PACSCAT) is a novel Surface Effect Ship (SES) and possesses distinctive resistance performance due to the presence of planing bottom. In this paper, the design of PACSCAT and air cushion system are described in detail. Model tests were carried out for Froude numbers ranging from 0.1 to 1.11, the focus is on the influence of air cushion system on resistance characteristics. Drag-reducing effect of air cushion system was proved by means of contrast tests in cuhionborne and non-cushionborne mode. Wave-making characteristics reflect that the PACSCAT would eventually enter planing regime, in which the air could just escape under the seals and the hull body could operate in a steady state. To acquire different air cushion pressure, air flow rate and leakage height were adjusted during tests. Experimental results show that the resistance performance in planing regime would decrease evidently as the increased air flow rate, however, the scheme with medium leakage height presents the best resistance performance in the hump region.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.895-906
• /
• 2018

The improvement project for school zone in Korea is occurring mostly in kindergartens and elementary schools in which children are mainly active, and is being promoted as part of measures to prevent children's traffic accidents. However, since the study on the essential installation facilities and proper level of safety facilities for School zone is lacking, this study relatively evaluated the efficiency of safety facility installation using DEA (Data Envelope Analysis) and suggested improvement plan. We built the facilities and incident data for 28 school zones in Hwaseong City. Six major facilities (Raised intersection, Raised crosswalk, Protective fence, Skid Proof, Speed hump, Speed cameras) that have proven to be effective in the preceding research were analyzed as input factors. As a result of the analysis, only 12 out of 28 showed efficiency and 16 out of efficiency. Effective groups of school zones were found to have fewer installed Protective fences, Skid Proof, and Speed cameras installations than school zones classified as ineffective groups. Protective fences were found to be efficient even if only 47% of the total extension of the school zone was installed, and the number of slip prevention facilities was 8.7 per square km. The number of subjects to be compared is 28, so this study is limited to use as a relative efficiency evaluation index, and it can be grouped into nationwide units and efficiency evaluation can be done for each group.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.103-110
• /
• 2011

This study deals with the traffic accidents by type. The objectives are to analyze the characteristics of 2 accident types, and to develop the models by type. In pursuing the above, this paper gives particular attentions to testing the differences between by type two groups, and developing the models (Poisson and negative binomial regressions) using the data of domestic circular intersections. The main results are as follows. First, the number of accidents in vehicle vehicle was analyzed to account for about 73.41% of total and to be higher than vehicle people. Second, two Poisson models and two negative binomial models which were all statistically significant were developed using vehicle people accidents and vehicle vehicle accidents as dependant variables. Finally, the traffic volume as common variable was selected in the models, and right-turn slip lane, speed hump, the number of driveways, the number of pedestrian crossings as specific variables of the models were selected.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.6
• /
• pp.649-654
• /
• 2010

A three-dimensional numerical study of the WIG-effect vehicle with a direct-underside-pressurization (DUP) system and a propeller is performed to analyze the aerodynamic forces and moments acting on the vehicle. The computational model includes all the compartments of a WIG-effect vehicle, including a propeller in the middle of the fuselage and an air chamber under the fuselage. The DUP system and propeller help considerably reduce the take-off speed and minimize the effect of the hump drag when the vehicle accelerates to take off on water. The airflow is accelerated by a propeller, and the air then enters the air chamber through a channel in the middle of the fuselage, this air helps increase the lift since the dynamic pressure of air is converted to static pressure. However, the air accelerated by the propeller produces excessive drag and creates yawing moment. It is found that the effect of yawing and rolling moments on static stability is negligible.

• Journal of the Korean Society of Safety
• /
• v.33 no.3
• /
• pp.71-76
• /
• 2018

The purpose of this study is to analyze the factors affecting the roundabout accidents near schools. This study gives particular attentions discussing characteristics by pedestrian accident severity using the ordered logit models. In pursuing the above, 63 roundabouts installed before 2014 are surveyed for modeling. the traffic accident data from 2014 to 2016 are collected from TAAS data set of Road Traffic Authority. Such 35variables explaining the accidents as environment, human, geometries, school and roundabout factor are selected from literature reviews. The main results are as follows. First, the ordered logit models (${\rho}^2$ of 0.272, $x^2$ of 24.723) which is statistically significant have been developed. Second, environment factor variable is analyzed to be day or night ($X_1$ ), human factor variables are evaluated to be driver gender($X_4$), older driver($X_5$), pedestrian gender($X_7$) and children pedestrian($X_8$ ). Third, geometries factor variable are analyzed to be speed limit sign($X_{16}$) and median barrier($X_{21}$), school factor variables are evaluated to be hump-type crosswalk($X_{25}$), CCTV($X_{26}$) and school zone sign($X_{27}$), roundabout factor are analyzed to be roundabout sign($X_{30}$) and number of circulatory roadway lane($X_{32}$). Finally, this study could give some implications to decreasing the accidents severity at roundabout near schools.