• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.12 s.243
• /
• pp.1597-1604
• /
• 2005

The identification of a moving noise source is important in reducing the source power of the transport systems such as airplanes or high speed trains. However, the direct measurement using a microphone running with noise source is usually difficult due to wind noise, white the source motion distorts the frequency characteristics of the pass-by sound measured at a fixed point. In this study the relationship between the spectra of the source and the pass-by sound signal is analyzed for an acoustic source moving at a constant velocity. Spectrum of the sound signal measured at a fixed point has an integral relationship with the source spectrum. Nevertheless direct conversion of the measured spectrum to the source spectrum is ill-posed due to the singularity of the integral kernel. Alternatively a differential equation approach is proposed, where the source characteristics can be recovered by solving a differential equation relating the source signal to the distorted measurement in time domain. The parameters such as the source speed and the time origin, required beforehand, are also determined only from the frequency-phase relationship using an auxiliary measurement. With the help of the regularization method, the source signal is successfully recovered. The effects of the parameter errors to the estimated frequency characteristics of the source are investigated through numerical simulations.

• Journal of Information Processing Systems
• /
• v.15 no.3
• /
• pp.604-615
• /
• 2019

Single-user spectrum sensing is susceptible to multipath effects, shadow effects, hidden terminals and other unfavorable factors, leading to misjudgment of perceived results. In order to increase the detection accuracy and reduce spectrum sensing cost, we propose an adaptive cooperative sensing strategy based on an estimated signal-to-noise ratio (SNR). Which can adaptive select different sensing strategy during the local sensing phase. When the estimated SNR is higher than the selection threshold, adaptive double threshold energy detector (ED) is implemented, otherwise cyclostationary feature detector is performed. Due to the fact that only a better sensing strategy is implemented in a period, the detection accuracy is improved under the condition of low SNR with low complexity. The local sensing node transmits the perceived results through the control channel to the fusion center (FC), and uses voting rule to make the hard decision. Thus the transmission bandwidth is effectively saved. Simulation results show that the proposed scheme can effectively improve the system detection probability, shorten the average sensing time, and has better robustness without largely increasing the costs of sensing system.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.3
• /
• pp.12-18
• /
• 2001

Frequency domain has been used to detect chatter vibration and to decide commencing point of chatter for the milling processes. For this, power spectrum of accelerations signal is analyzed in the frequency domain. Also, the power spectrum and surface roughness are measured, compared, and evaluated according to the depth of cut by experimental works. As a results, it is known that the commencing point of chatter can be decided the behavior of the maximum amplitude of the power spectrum of acceleration signal and there is a correlation between the power spectrum of acceleration signal and the surface roughness. In conclusion, the power spectrum of acceleration signal can be used as a useful information for detec-tion and estimation of chatter vibration in machining.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.212-218
• /
• 2013

This paper presents an SVD(Singular Value Decomposition)-Pseudo Spectrum method for SAR (Synthetic Aperture Radar) imaging. The purpose of this work is to improve resolution and target separability of SAR images. This paper proposes SVD-Pseudo Spectrum method whose advantages are noise robustness, reduction of sidelobes and high resolution of spectral estimation. SVD-Pseudo Spectrum method uses Hankel Matrix of signal components and SVD (Singular Value Decomposition) method. In this paper, it is demonstrated that the SVD-Pseudo Spectrum method shows better performance than the matched filtering method and the conventional super-resolution based multiple signal classification (MUSIC) method in SAR image processing. The targets to be separated are modeled, and this modeled data is used to demonstrate the performance of algorithms.

• 전기의세계
• /
• v.34 no.2
• /
• pp.94-98
• /
• 1985

Autocorrelation에 관계되는 Fourier변환의 기본적인 성질을 이용하여 speckle잡음제거가 power spectrum estimation 문제와 같이 해석될 수 있다는 것을 보였고 spectral estimation 방법으로서 최대 entrppy방법을 사용하여 딴 방법들과 비교하여 볼때 좋은 결과를 얻었다. 앞으로 2차원 test object까지의 확장, 이 알고리즘의 각 파라메타들에 대한 sensitivity, optimal한 Hanning window크기 판단 기준으로서 normalized mean squared error(NMSE)를 사용하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.440-446
• /
• 2010

Convergence of IT and BT is considered in many area, especially in medical care industry. The example of this trend is a capsule endoscope. But in a capsule endoscope, communication through human body has a few restrictions. At first, the transmit power should be limited not to have a bad effect on human organs and for the battery capacity. Second, the channel characteristic of human body has not been examined exactly. Third, general modulation / demodulation techniques which require a channel estimation cannot be used because of battery limit. There also may be a lot of interference signals because a capsule endoscope uses UWB bandwidth. In this paper, we introduce Chirp Spread Spectrum Differential Binary Phase Shift Keying(CSS-DBPSK) and propose Chirp Spread Spectrum On-Off Keying(CSS-OOK) which don't require a channel estimation and robust to interference signals. Using CSS-DBPSK or CSS-OOK, we can get 5 dB or 2~3 dB of Eb/N0 gain at 10-5 target BER. And if there are interference signals, those gains of CSS-DBPSK and CSS-OOK are increased.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.5
• /
• pp.13-22
• /
• 2019

In order to evaluate the earthquake damage level of small and medium - sized bridges without earthquake monitoring system, we proposed an algorithm for estimating the seismic force at the target bridge location using the ground acceleration data from the earthquake observatories near the structure. In general, response spectrum analysis, which is the most widely used dynamic analysis method to design and evaluate the structural system numerically is required a response spectrum to determine the dynamic loading. In this study, selection methods of the three closest observatories from the target structure and estimation method of ground response spectrum at arbitrary locations are developed. The proposed method can consider the distance and phase between the target bridge and the seismic station and from the relationship between the acceleration amplitudes and the location of the selected seismic station, the earthquake loading of the target bridge can be determined. The proposed algorithm is estimated to be more conservative than the response spectrum evaluated by actual earthquake data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.7B
• /
• pp.951-956
• /
• 2001

A weather radar usually extracts the necessary information from the return Doppler spectrum moment estimates. Phase stability is a very important factor in obtaining accurate and reliable information in a Doppler weather radar system since the system phase noise may seriously degrade the weather spectrum moment estimation quality. These spectrum moment estimates are commonly obtained using the pulse pair method which is simple to implement and fast enough to process an enormous amount of weather radar data in real time. Therefore, an analytical method is developed in this paper to analyze and quantify the phase noise effects on the pulse pair spectrum moment estimates in terms of the phase noise power and broadness.

• Journal of electromagnetic engineering and science
• /
• v.12 no.3
• /
• pp.203-209
• /
• 2012

In order to improve sensing performance when the noise variance is not known, this paper considers a so-called blind spectrum sensing technique that is based on eigenvalue models. In this paper, we employed the spiked population models in order to identify the miss detection probability. At first, we try to estimate the unknown noise variance based on the blind measurements at a secondary location. We then investigate the performance of detection, in terms of both theoretical and empirical aspects, after applying this estimated noise variance result. In addition, we study the effects of the number of SUs and the number of samples on the spectrum sensing performance.

• Speech Sciences
• /
• v.10 no.4
• /
• pp.137-147
• /
• 2003

Speech synthesis can classify by synthesis way, that is waveform coding, source coding and mixture coding. Specially, waveform coding is suitable for high quality synthesis. However, it is not desirable by synthesis techniques of syllable or phoneme unit because it do not separate and handles excitation and formant part. Therefore, there is a need for pitch alteration method applied in synthesis by the rule in waveform coding. This study propose about pitch alteration method that use spectrum scaling after do to flatten spectra by subband linear approximation to minimize spectrum distortion. This paper show evaluation whether show excellency of some measure compared with LPC, Cepstrum, lifter function and method that propose. estimation method seeks distribution of each flattened signal and measured degree of flattened spectra Signal flattened is normalized, So that highest point amounts to zero, and distribution of signal ,whose average is zero, is calculated. this show result that measure the spectrum distortion rate to estimate performance of method that propose. The average spectrum distortion rate was kept below the average 2.12%, so the method that propose is superiors than existent method.