• 제목/요약/키워드: Spectrum Estimation

검색결과 531건 처리시간 0.025초

대역 확산 신호를 위한 지연 시간 추정 알고리즘 (A Super-Resolution Time Delay Estimation Algorithm for Spread Spectrum Signals)

  • 신준호;명승일;장은영;박형래
    • 한국통신학회논문지
    • /
    • 제37권2A호
    • /
    • pp.119-127
    • /
    • 2012
  • 본 논문에서는 대역 확산 (spread spectrum) 방식의 실시간 위치 추적 시스템 (RTLS: real-time locating system)을 위한 초 분해능 지연 시간 추정 (super-resolution time delay estimation) 알고리즘을 개발하고 다중 경로 환경에서 성능을 분석한다. 기존의 코릴레이션 방식은 주변에 장애물이 없는 line-of-sight (LOS) 환경에서는 비교적 정확한 지연 시간 추정이 가능하나 지연 시간의 차이가 한 칩 이내인 근접 다중 경로 환경에서는 성능이 급격히 저하되는 문제점이 있다. 따라서 본 논문에서는 도래각 추정에 이용되는 MUSIC 알고리즘을 이용하여 근접 다중 경로 환경에서도 신호의 지연 시간을 추정할 수 있는 초 분해능 지연 시간 추정 알고리즘을 개발하고 이를 ISO/IEC 24730-2.1 RTLS 시스템에 적용하여 성능을 분석한다.

고저항 지락사고 검출을 위한 신호처리 방법에 관한 연구 (A Study On The Methods Of Signal Processing For High Impedance Fault Detection)

  • 이성환;우천희;강신준;우광방;이진;김상철
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1993년도 하계학술대회 논문집 A
    • /
    • pp.156-158
    • /
    • 1993
  • This paper presents several techniques of power spectrum estimation for high impedance fault detection. High impedance faults are those faults with current too low to be reliably cleared by conventional overcurrent protection. So power spectrum estimation is required. AR and MA techniques require optimal order for good performance of power spectrum estimation because these techniques are unstable for order selection. ARMA and Extended techniches are stable for order selection and have very sharp response. So ARMA and Extended Prony techniques are suitable for our purpose.

  • PDF

Energy Spectrum Measurement of High Power and High Energy (6 and 9 MeV) Pulsed X-ray Source for Industrial Use

  • Takagi, Hiroyuki;Murata, Isao
    • Journal of Radiation Protection and Research
    • /
    • 제41권2호
    • /
    • pp.93-99
    • /
    • 2016
  • Background: Industrial X-ray CT system is normally applied to non-destructive testing (NDT) for industrial product made from metal. Furthermore there are some special CT systems, which have an ability to inspect nuclear fuel assemblies or rocket motors, using high power and high energy (more than 6 MeV) pulsed X-ray source. In these case, pulsed X-ray are produced by the electron linear accelerator, and a huge number of photons with a wide energy spectrum are produced within a very short period. Consequently, it is difficult to measure the X-ray energy spectrum for such accelerator-based X-ray sources using simple spectrometry. Due to this difficulty, unexpected images and artifacts which lead to incorrect density information and dimensions of specimens cannot be avoided in CT images. For getting highly precise CT images, it is important to know the precise energy spectrum of emitted X-rays. Materials and Methods: In order to realize it we investigated a new approach utilizing the Bayesian estimation method combined with an attenuation curve measurement using step shaped attenuation material. This method was validated by precise measurement of energy spectrum from a 1 MeV electron accelerator. In this study, to extend the applicable X-ray energy range we tried to measure energy spectra of X-ray sources from 6 and 9 MeV linear accelerators by using the recently developed method. Results and Discussion: In this study, an attenuation curves are measured by using a step-shaped attenuation materials of aluminum and steel individually, and the each X-ray spectrum is reconstructed from the measured attenuation curve by the spectrum type Bayesian estimation method. Conclusion: The obtained result shows good agreement with simulated spectra, and the presently developed technique is adaptable for high energy X-ray source more than 6 MeV.

IMT 운용을 위한 주파수 소요량 산출 (Spectrum Requirement Estimation for IMT Operation)

  • 한태영;김남;양재수;최정훈;김철호
    • 한국전자파학회논문지
    • /
    • 제19권2호
    • /
    • pp.161-167
    • /
    • 2008
  • 본 논문은 IMT 이동통신 서비스에 있어서 ITU-R의 권고안 ITU-R M.1390, ITU-R (IMT.METH)에 권고한 주파수 소요량 산출의 개요와 그 차이점을 기술하고, ITU-R (IMT.METH) 방법론을 최근의 IMT 서비스에 대한 주파수 소요량을 산출하는데 적용하였다. 발생 호량(offered traffic)과 시스템 용량, 서비스 품질(quality of service) 기준에 의하여 결정되는 운반 호량(carried traffic)에 대한 모델과 알고리즘을 기술하고 산출예로서 최근에 서비스가 개시되고 있는 IMT의 배치에 따른 2010년부터 2015년까지 국내에서 운용되고 있는 IMT 서비스에 대하여 여러 가지 시장 자료와 ITU의 예측 자료를 통하여 얻은 후 주파수 소요량을 산출하였다.

마이크로폰 쌍을 이용한 음원의 도달시간차이 추정에서 음성신호의 프리엠퍼시스 영향 분석 (Preemphasis of Speech Signals in the Estimation of Time Difference of Arrival with Two Microphones)

  • 권홍석;김시호;배건성
    • 한국음향학회:학술대회논문집
    • /
    • 한국음향학회 2004년도 추계학술발표대회논문집 제23권 2호
    • /
    • pp.35-38
    • /
    • 2004
  • In this paper, we investigate and analyze the problems encountered in frame-based estimation of TDOA(Time Difference of Arrival) using CPSP function. Spectral leakage occurring in framing of a speech signal by a rectangular window makes estimation of CPSP spectrum inaccurate. Framing with a Hamming window to reduce the spectral leakage effect distorts the signal due to the different weighting at temporally same sample, which make the TDOA estimation using CPSP function inaccurate. In this paper, we solve this problem by reducing the dynamic range of the spectrum of a speech signal with preemphasis. Experimental results confirm that the framing of pre-emphasized microphone output with a rectangular window shows higher success ratio of TDOA estimation than any other framing methods.

  • PDF

응답예측모델을 이용한 속도의존형 감쇠장치의 최대제어력 산정 (Maximum Force Limit of velocity-dependent Damping Devices Using Response Estimation Models)

  • Lee, Sang-Hyun;Park, Ji-Hun;Min, Kyung-Won
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2003년도 추계학술대회논문집
    • /
    • pp.60-65
    • /
    • 2003
  • In this study, for estimating responses of a controlled structure and determining the maximum control force of velocity-dependent damping devices, three estimation models such as Fourier envelope convex model, probability model, and Newmark design spectrum are used. For this purpose, a procedure proposed by Gupta (1990) for estimating spectral velocity using pseudo-spectral velocity which is given by the estimation models is used and modified to consider the effects of increased damping ratio by the damping device. Time history results indicate that Newmark design spectrum gives the best estimation of maximum control force for over all period structures.

  • PDF

항공기용 레이다에서의 도플러 스펙트럼 분석 (Analysis of Doppler Spectra in an Airborne Radar)

  • 이종길
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2008년도 추계종합학술대회 B
    • /
    • pp.628-631
    • /
    • 2008
  • 원격탐지를 목적으로 하는 레이다 시스템에서는 일반적으로 도플러 필터뱅크를 적용하여 목표물 반사 신호들의 스펙트럼을 분석함으로서 반사 신호의 크기 및 속도정보 등을 얻게 된다. 이러한 스펙트럼 추정방법은 오래 전부터 널리 이용되고 있는 FFT(Fast Fourier Transform) 기법을 이용한 것으로 대부분의 레이다 시스템에서 채택하고 있는 방식이다. 그러나 레이다 시스템에서의 목표물 반사 신호 획득시간이 현저히 짧은 경우, 즉 고속으로 이동하는 항공기용 시스템이나 매우 빠른 목표물들의 즉각적인 탐지가 목적인 시스템에서는 기존 FFT 스펙트럼 추정방식으로는 높은 도플러 주파수 해상도를 얻을 수 없기 때문에 정확도가 현저히 떨어질 수 있다. 따라서 본 논문에서는 이러한 문제점을 극복하기 위하여 해상도 문제가 발생하지 않는 파라메터 추정방식인 AR 스펙트럼 추정 방법에 대하여 고찰하였다.

  • PDF

Adaptive Adjustment of Compressed Measurements for Wideband Spectrum Sensing

  • Gao, Yulong;Zhang, Wei;Ma, Yongkui
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제10권1호
    • /
    • pp.58-78
    • /
    • 2016
  • Compressed sensing (CS) possesses the potential benefits for spectrum sensing of wideband signal in cognitive radio. The sparsity of signal in frequency domain denotes the number of occupied channels for spectrum sensing. This paper presents a scheme of adaptively adjusting the number of compressed measurements to reduce the unnecessary computational complexity when priori information about the sparsity of signal cannot be acquired. Firstly, a method of sparsity estimation is introduced because the sparsity of signal is not available in some cognitive radio environments, and the relationship between the amount of used data and estimation accuracy is discussed. Then the SNR of the compressed signal is derived in the closed form. Based on the SNR of the compressed signal and estimated sparsity, an adaptive algorithm of adjusting the number of compressed measurements is proposed. Finally, some simulations are performed, and the results illustrate that the simulations agree with theoretical analysis, which prove the effectiveness of the proposed adaptive adjusting of compressed measurements.

Unscented 칼만 필터 기반의 chirp spread spectrum 노드 위치 추정 (Position Estimation of Chirp Spread Spectrum Node based on Unscented Kalman Filter)

  • 조현우;반성준;이영훈;전용주;김상우
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
    • /
    • pp.187-189
    • /
    • 2009
  • Position estimation in indoor is significant problem, because GPS which is usually used for outdoor positioning cannot be utilized to indoor positioning. Sensor network can be a solution for the positioning. Recently, chirp spread spectrum(CSS) specified in IEEE 802.15.4a provides an ability of ranging. Based on the results of the ranging, a position of a CSS node can be calculated by using trilateration. In this case, Kalman filter can be applied to the trilateration because of the measurement noise. In this paper, we apply the unscented Kalman filter for the trilateration. The trilateration can be represented to a nonlinear state space equation, and the unscented Kalman filter is suitable for nonlinear state space equation. Through the experimental results. we show the accuracy of the estimated position.

  • PDF

스펙트럼 추정을 이용한 탄성파 트레이스 내삽 (Seismic Trace Interpolation using Spectral Estimation)

  • 지준
    • 지구물리와물리탐사
    • /
    • 제6권3호
    • /
    • pp.134-137
    • /
    • 2003
  • 본 본문은 탄성파 자료에서 흔히 볼 수 있는 선형이벤트에 대한 내삽 기법을 소개하고 있다. 선형이벤트를 갖고 있는 2차원 자료의 경우, 내삽을 수행한 후의 스펙트럼의 모양은 내삽하기 전의 알리아싱(aliasing)된 스펙트럼의 모양으로부터 추정이 가능하다. 측정되지 않은 트레이스의 복원은 특정 필터를 적용한 결과의 전체 에너지가 최소화 되도록 구해지게 되며 이때 사용되는 필터의 진폭 스펙트림은 추정된 스펙트럼의 역(inverse)에 해당된다.