• 한국안광학회지
• /
• 제6권2호
• /
• pp.77-80
• /
• 2001

본 논문은 저출력 He-Ne 레이저의 스펙클 현상을 이용하여, 진동하는 물체의 표면요소들에 의한 운동상태를 분석하는데 그 목격이 있다. 레이저에서 나온 빛은 구리판에서 반사되어 진동판에 스펙클로 나타난다. 이것을 뒤에 설치된 스피커의 음파로 진동시키면 스펙클은 여러 가지 형태로 변화한다. 진동판이 최대로 진동할 때의 진동수는 역학적 공명 진동수이므로 그때의 스펙클변화를 진동판에 표시한다. 스펙클은 진동하는 부분과 진동하지 않는 부분으로 나뉘어 지는데 진동하는 부분은 흐려지거나 스펙클이 나타나지 않는다. 진동모드의 변화는 진동판의 종류와 크기, 고정단 집게의 위치에 따라 달라지는 것을 볼 수 있다.

• 전기학회논문지
• /
• 제61권8호
• /
• pp.1172-1178
• /
• 2012

In this paper, the gamma ray irradiation test results of the CCD cameras are described. From the low dose-rate (2.11 Gy/h) to the high dose-rate (150 Gy/h) level, which is the same level when the hydrogen explosion was occurred in the 1~3 reactor unit of the Fukushima nuclear power plant, the monitoring performance of the cameras owing to the speckles are evaluated. The numbers of speckles, generated by gamma ray irradiation, in the image of cameras are calculated by image processing technique. And the legibility of the sensor indicator (dosimeter) owing to the numbers of the speckles is presented.

• 대한원격탐사학회지
• /
• 제28권6호
• /
• pp.635-651
• /
• 2012

To produce a level-3 monthly composite image from daily level-2 Sea-viewing Wide Field-of-view Sensor (SeaWiFS) chlorophyll-a concentration data set in the East Sea, we applied four average methods such as the simple average method, the geometric mean method, the maximum likelihood average method, and the weighted averaging method. Prior to performing each averaging method, we classified all pixels into normal pixels and abnormal speckles with anomalously high chlorophyll-a concentrations to eliminate speckles from the following procedure for composite methods. As a result, all composite maps did not contain the erratic effect of speckles. The geometric mean method tended to underestimate chlorophyll-a concentration values all the time as compared with other methods. The weighted averaging method was quite similar to the simple average method, however, it had a tendency to be overestimated at high-value range of chlorophyll-a concentration. Maximum likelihood method was almost similar to the simple average method by demonstrating small variance and high correlation (r=0.9962) of the differences between the two. However, it still had the disadvantage that it was very sensitive in the presence of speckles within a bin. The geometric mean was most significantly deviated from the remaining methods regardless of the magnitude of chlorophyll-a concentration values. Its bias error tended to be large when the standard deviation within a bin increased with less uniformity. It was more biased when data uniformity became small. All the methods exhibited large errors as chlorophyll-a concentration values dominantly scatter in terms of time and space. This study emphasizes the importance of the speckle removal process and proper selection of average methods to reduce composite errors for diverse scientific applications of satellite-derived chlorophyll-a concentration data.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제8권6호
• /
• pp.705-716
• /
• 2002

본 논문은 MR 머리 영상 데이타를 디렉트 볼륨 렌더링하는 방법을 제안한다. MR 영상을 가시화하기 위해서는 서피스 렌더링을 많이 사용하나 이 방법은 면을 추출하는 과정에서 면 내부의 정보를 잃어버린다. 디렉트 볼륨 렌더링은 면 내부의 정보를 추출 할 수 있으나 데이타의 특성상 MR 머리 영상 데이타에 이 방법을 적용하기가 쉽지 않다. 이 논문에서는 MR 머리 영상 데이타를 뇌와 뇌 이외의 구성 요소로 분할한 다음에 뇌 복셀값을 증가시키고 원래의 영상과 다시 결합시켜 디렉트 볼륨 렌더링을 시도하였다. 뇌 경계선은 히스토그램 경계값, 모포로지 연산, 스네이크 알고리즘(snakes algorithm)을 이용하여 추출하였다. 추출된 뇌 경계선는 육안으로 추출한 것의 91~95%의 유사도를 보인다. 제안된 디렉트 볼륨 렌더링은 뇌와 뇌 이외의 구성 요소를 동시에 3차원 가시화하였다.

• 한국지구과학회지
• /
• 제30권2호
• /
• pp.234-246
• /
• 2009

1997년 9월부터 2007년 12월까지 동해의 SeaWiFS 자료를 이용하여 SeaWiFS 클로로필-${\alpha}$ 농도가 가지는 스펙클 오차의 특성을 분석하고 그 원인을 조사하였다. 비정상적으로 큰 농도를 가진 스펙클들은 산발적으로 분포하였으며, 주변 화소들과 비교하였을 때 $10mg/m^3$ 이상의 현저하게 큰 편차를 보였다. 이 스펙클들은 겨울철에 자주 나타나는 경향이 있었으며, 이는 구름 분포와 관련이 있을 수 있다. 10년 평균된 겨울철 운량은 동해 북서쪽보다 스펙클이 자주 출현하는 남동쪽에서 더 크게 나타났다. 통계적 분석 결과는 운량이 증가할수록 스펙클의 수가 증가하는 것을 보여주었다. 스펙클 화소의 정규화 된 수출광량은 단파장 영역(443, 490, 510nm)에서 상당히 낮았으나 555nm 파장대는 정상적이었다. 이러한 낮은 관측치들은 클로로필-${\alpha}$ 산출 식에서 비정상적으로 큰 농도를 생산하였다. 본 연구는 동해의 SeaWiFS 클로로필-${\alpha}$ 농도자료가 지니는 스펙클 오차에 대한 문제점을 제기하였으며, 적절한 해색 원격탐사 기술을 활용한 좀 더 신뢰도 있는 클로로필-${\alpha}$ 자료를 해양 응용 연구에 사용해야 함을 제시하였다.

• 한국지반신소재학회논문집
• /
• 제21권1호
• /
• pp.33-48
• /
• 2022

This paper presents illustrative examples of the application of advanced digital image correlation (DIC) technology in the geotechnical laboratory tests, such as shallow footing test, trapdoor test, retaining wall test, and wide width tensile test on geogrid. The theoretical background of the DIC technique is first introduced together with fundamental equations. Relevant reduced-scale model tests were then performed using standard sand while applying the DIC technique to capture the movement of target materials during tests. A number of different approaches were tried to obtain optimized images that allow efficient tracking of material speckles based on the DIC technique. In order to increase the trackability of soil particles, a mix of dyed and regular sand was used during the model tests while specially devised painted speckles were applied to the geogrid. A series of images taken during tests were automatically processed and analyzed using software named VIC-2D that automatically generates displacements and strains. The soil deformation field and associated failure patterns obtained from the DIC technique for each test were found to compare fairly well with the theoretical ones. Also shown is that the DIC technique can also general strains appropriate to the wide width tensile test on geogrid, It is demonstrated in this study that the advanced DIC technique can be effectively used in monitoring the deformation and strain field during a reduced-scale geotechnical model laboratory test.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.688-694
• /
• 2002

As a tool for strain measurement to work with screw driven or hydraulic material test systems, in which mechanical vibration is inherent, SSDG(Speckle Strain/Displacement Gage), ESP(Electronic Speckle Photography) and its 3-dimension version SDSP are investigated for the theory and practical appliance. Through tension test of steel strips, their validity and shortcomings are examined. As the results, it has been shown that, although SSDG and ESP provide direct measurement of in-plane strain in one direction, they are so sensitive to the out-plane displacement. On the other hand, SDSP which is aided with DIC (Digital Image Correlation) technique to trace the movement of the speckles provides not only in-plane 2-dimensional displacement field, but also out-of-plane displacement simultaneously. However, because the DIC is time-consuming, not automated yet and it needs post-processing to evaluate strain from the displacement field, SDSP appears to be not adequate as a real time sensor.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.517-518
• /
• 2006

Transient and asymmetric density distributions have been investigated by three-dimensional digital speckle tomography with a novel integration method. Multiple CCD images captured movements of speckles in three angles of view simultaneously because the flows were asymmetric and unsteady. The speckle movements which have been formed by a ground glass between no flow and downward butane flow from a circular half opening have been calculated by a cross-correlation tracking method so that those distances can be transferred to deflection angles of laser rays for density gradients. A novel integration method has been developed to obtain projection data from the deflection angles for the speckle tomography.'The three-dimensional density fields have been reconstructed from the accurate projection values by a real-time multiplicative algebraic reconstruction technique (MART) with the developed integration method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1789-1794
• /
• 2003

Transient and asymmetric density distributions have been investigated by digital speckle tomography. Multiple CCD images captured movements of speckles in three angles of view simultaneously because the flows were asymmetric and transient. The speckle movements between no flow and downward butane flow from a circular half opening have been calculated by a cross-correlation tracking method so that those distances can be tranferred to deflection angles of laser rays for density gradients. The three-dimensional density fields have been reconstructed from the fringe shift by a real-time multiplicative algebraic reconstruction technique (MART).

• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.47-54
• /
• 2003

As a tool for strain measurement to work with screw driven or hydraulic material test systems, in which mechanical vibration is inherent, SSDG (Speckle Strain/Displacement Gage), ESP (Electronic Speckle Photography) and its 3-dimension version SDSP are evaluated for the theory and practical appliance. Through tension test of steel strips, their validity and shortcomings are examined. As the results, it has been shown that, although SSDG and ESP provide direct measurement of in-plane strain in one direction, they are so sensitive to the out-plane displacement. On the other hand, SDSP which is aided with DIC (Digital Image Correlation) technique to trace the movement of the speckles provides not only in-plane 2-dimensional displacement field, but also out-of-plane displacement simultaneously. However, because the DIC is time-consuming, not automated yet and it needs post-processing to evaluate strain from the displacement field, SDSP appears to be not adequate as a real time sensor.