• Economic and Environmental Geology
• /
• v.18 no.1
• /
• pp.1-9
• /
• 1985

To understand the characteristics of uranium distribution, and the correlation of the uranium content and major constituents in uraniferous black slates from the Jinsan area of Ogcheon Fold Terrain, forty representative specimens were analyzed by mineralogical and radiometric techniques. According to statistical analysis, the uranium has a positive correlation with organic carbon and limonite, but a negative relation to muscovite and other opaques. The relationship with the highest and meaningful correlation is between log uranium and organic carbon. The log uranium-organic carbon correlation coefficient is 0.845 and these two constituents have about 71.4% association. It suggests that the abundance of organic carbon controlled the uranium precipitation. The relationship of organic carbon to log uranium can be expressed by following regression equation log ($U_3O_8{\times}10^4+1$)=-1.3447+2.5599 log (organic carbon). The multiple regression equation of different major components to log uranium is log ($U_3O_8{\times}10^4+1$)=0.77396+ 0.04465 (organic carbon)+0.00574 (quartz)-0.00964 (muscovite)+0.37827 (biotite)-0.02286 (clay substance)+0.01268 (other silicates)+0.1032 (barite)-0.00224 (apatite)+0.01606 (calcite)+0.08258 (hematite)-0.02406 (limonite)-0.01715 (other opaques).

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2007.05a
• /
• pp.39-50
• /
• 2007

Sexing from bovine embryos fertilized in vitro implicates a possibility of the sex controlled cattle production. This study was carried out to produce the sex determined cattle through the embryonic sexing by fluorescence in situ hybridization (FISH) technique. FISH was achieved in in vitro fertilized bovine embryos using a bovine Y-specific DNA probe constructed from the btDYZ-1 sequence. Using this probe, a male-specific signal was detected on 100% of Y-chromosome bearing metaphase specimens. The analyzable rate of embryonic sexing by FISH technique was about 93% (365/393) regardless of embryonic stages. As tested single blastomere by FISH and then karyotype with their biopsied embryos, the accuracy of sex determination with FISH was 97.6%. We tried the embryo transfer with sex determined embryos on 15 cattle. Among them, the 5 cattle delivered calf with expected sex last year.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.5
• /
• pp.1-8
• /
• 2014

Structures requiring chemical resistance are usually coated with surface protecting agents, but the cost for maintenance and re-construction is incurred due to the low durability. Therefore, in this study, sulfur was polymerized and the performance was examined so that it could be used as the concrete surface protecting agents for structures requiring chemical resistance. The evaluation results indicated that for the spray of the sulfur polymer surface coating agents, the application of the gravity type was appropriate; and for the number of coating times, about 3 cycle spray gave the best results. For the surface condition of the concrete to be coated with the surface protecting agents, outstanding quality was obtained above room temperature ($20{\sim}30^{\circ}C$), and the bond strength increased as the temperature increased. The evaluation results of the strength characteristics depending on the filler content of the surface protecting agents indicated that about 20~40% filler mixing contributed to the strength improvement as it reduced the shrinkage of the sulfur polymer. Also, the mixing of silica showed larger increase in the bond strength than the mixing of fly ash, and the most outstanding bond strength characteristics could be obtained by the mixing of both silica and fly ash. In the case of the chemical resistance, the strength reduction was minimized and outstanding chemical resistance was obtained when the fly ash and silica were substituted by 20%, respectively. The performance evaluation of the chloride ion penetration indicated that for the specimens coated with the sulfur polymer surface protecting agents, the chloride ion penetration resistance increased by 29~48% compared to the specimen without the coating of the surface protecting agent. The examination of the coating condition of the surface protecting agents, compressive strength, bond strength, chemical resistance, and salt damage resistance indicated that in the range of this study, the optimal level was when the silica and fly ash were substituted by 20%, respectively, as the filler for the sulfur polymer.

• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.42-50
• /
• 2009

Deterioration of long-term dentin adhesion durability is thought to occur by hydrolytic degradation within hydrophilic domains of the adhesive and hybrid layers. This study investigated the hypothesis that priming the collagen network with an organic solvent displace water without collapse and thereby obtain good bond strength with an adhesive made of hydrophobic monomers and organic solvents. Three experimental adhesives were prepared by dissolving two hydrophobic monomers, bisphenol-A-glycidylmethacrylate (Bis-GMA) and triethyleneglycol dimethacrylate (TEGDMA), into acetone, ethanol or methanol. After an etching and rinsing procedure, the adhesives were applied onto either wet dentin surfaces (wet bonding) or dentin surfaces primed with the same solvent (solvent-primed bonding). Microtensile bond strength (MTBS) was measured at 48 hrs, 1 month and after 10,000 times of thermocycles. The bonded interfaces were evaluated using a scanning electron microscope (SEM). Regardless of bonding protocols, well-developed hybrid layers were observed at the bonded interface in most specimens. The highest mean MTBS was observed in the adhesive containing ethanol at 48 hrs. With solvent-primed bonding, increased MTBS tendencies were seen with thermo cycling in the adhesives containing ethanol or methanol. However, in the case of wet bonding, no increase in MTBS was observed with aging.

• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.61-68
• /
• 2009

This study was performed to assess the radiopacity of a variety of root canal sealers according to the specification concerning root canal sealers. Ten materials including Tubli-$Seal^{TM}$. Kerr Pulp Canal $Sealer^{TM}$, AH $26^{(R)}$, AH $plus^{(R)}$, AH plus $jet^{TM}$, Ad sea $1^{TM}$. $Sealer^{TM}$, $NOGENOL^{TM}$, ZOB $seal^{TM}$, $Epiphany^{TM}$ and dentin were evaluated in this study. In the first part, densitometric reading of an each step of aluminum step wedge on occlusal film was performed at different voltage and exposure time. In the second part, ten specimens were radiographed simultaneously with an aluminum step wedges on the occlusal films under decided condition. The mean radiographic density values of the materials were transformed into radiopacity expressed equivalent thickness of aluminum (mm Al). The following results were obtained. 1. Among the various conditions, the appropriate voltage and exposure time that meet the requirement density was 60 kVp at 0.2 s 2. All of the materials had greater radiopacity than 3 mm Al requirement of ANSI/ADA specification No. 57 (2000) and ISO No. 6876 (2001) standards. 3. The radiopacity of materials increased as thickness of materials increased. 4. The mm Al value of each specimen at 1mm in thickness has a significant difference in the statistics. It suggests that root canal sealers have a sufficient radiopacity that meet the requirement.

• Restorative Dentistry and Endodontics
• /
• v.36 no.5
• /
• pp.409-418
• /
• 2011

Objectives: The purpose of this study was to compare the microshear bond strength (${\mu}$SBS) and bonding interfaces of two-step total-etching and self-etching adhesive systems to three etch types of dentin either the acid etched, laser etched or laser and acid etched. Materials and Methods: The occlusal dentinal surfaces of thirty human molars were used. They were divided into six groups: group 1, 37% $H_3PO_4$ + Single Bond 2 (3M ESPE); group 2, Er:YAG laser (KEY Laser 3, KaVo) + Single Bond 2; group 3, Er:YAG laser + 37% $H_3PO_4$ + Single Bond 2; group 4, Clearfil SE Primer + Bond (Kuraray); group 5, Er:YAG laser + Clearfil SE Bond; group 6, Er:YAG laser + Clearfil SE Primer + Bond. The samples were subjected to ${\mu}$SBS testing 24 hr after bonding. Also scanning microscopic evaluations were made on the resin-dentin interfaces of six specimens. Results: The ${\mu}$SBS of group 2 was significantly lower than that of groups 1 and 3 in Single Bond 2 (p < 0.05). There were significant differences among the uSBS of groups 4, 5, and 6 in Clearfil SE Bond (p < 0.05). Very short and slender resin tags were observed in groups 2 and 5. Long and slender resin tags and lateral branches of tags were observed in groups 3 and 6. Conclusions: Treatment of dentin surface using phosphoric acid or self-etching primer improved the adhesion of Er:YAG lased dentin.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.151-161
• /
• 2007

Dental caries is the most common disease in the oral cavity However, the mechanism and treatment of dental caries is not completely understood since many complex factors are involved. Especially the effect of pH on remineralization of early stage of dental caries is still controversial In this study, dental caries in dentin was induced by using lactic acidulated buffering solutions and the loss or inorganic substance was measured. Also decalcified specimens were remineralized by three groups of solution with different pH (group of pH 4.3, 5.0, and 5.5). Then, the amount and the area of inorganic substance precipitation was quantitatively analyzed with microradiograph. Also a qualitative comparison of the normal phase the demineralized phase, and the remineralized phase of hydroxyapatite crystal was made under SEM. The results were as follows, 1. In microradiograghic analysis, as the pH increased, the amount of remineralization in decalcified dentin tended to increase significantly As the pH decreaced, deeper decalcification, however, occurred along with remineralization. The group of pH 5.5 had a tendency to be remineralized without demineralization (p<0.05). 2. In SEM view, the remineralization in dentine caries occurred from the hydroxyapatite crystal surface surrounding the mesh of organic matrix, and eventually filled up the demineralized area. 3. 5 days after remineralization, hydroxyapatite crystal grew bigger with deposition of inorganic substance in pH 4.3 and 5.0 group, and the crystal in the remineralized area appeared to return to normal. After 10 days, the crystals in group of pH 4.3 and 5.0, which grew bigger after 5 days of remineralization, turned back to their normal size, but in group of pH 5.5, some crystals were found to double their size. In according to the results of this experiment, the decalcifying and remineralizing process of dentine is neither simple nor independent, but a dynamic process in which decalcification and remineralization occur simultaneously. The remineralization process occurred from the hydroxyapatite crystal surface.

• Korean Journal of Environmental Biology
• /
• v.17 no.3
• /
• pp.293-303
• /
• 1999

Fish fauna of fishes collected from the Saemankum area in the west coast of Chollabuk-do was studied from October 1996 to April 1999. The specimens collected from the five sites in this area were identified into 107 species belonging to 83 genera and 52 families. Of them the largest group of fishes was order Perciformes, comprising 50 species and 21 families, and showed 46.7% in total numbers of species. Next larger groups were orders Scorpaeniformes and Pleuronectiformes containing 16 and 14 species respectively. In this area, the group comprising a lots of species was the family Gobiidae taking 13 species, and next groups were the families of Sciaenidae (6 species), Engraulidae (5 species) and Pleulonectidae (5 species). The dominant species was Engraulis japonicus which is 23.4 ％ in total indiyidual numbers, and subdominant species was Thryssa kummazensis which is 18.5%. The important species economically in the Saemankum area were Anguilla japonica, E. japonicus, T. kummalensis, Konosirus punctatus, Sardinella zunasi, Mugil cephalus, Argyrosomus argentatus, Pseudosciaena polyactis, Collichthys lucidus, Paralichthys olivuceus and Cynoglossus joyneri. The species of high frequency in this area from February to June every year were Anguilla japonica, E. japonicus, T. kammalensis, K. punctatus, S. zunasi, Coilia nasus, Syngnatuus schlegeli, P. polyactis, C. lucidus and Pholis fangi. Ophichthus rotundus, Repomucenus leucopoecitus and R. koreanus were Korean endemic species in the west coast of Chollabuk-do. On the other hand, Boleophthalmus pectinirostris was not found during this study, and Periophthalmus modertus, Tridentiger barbatus and Lophogobius ocellioauda sharply decreased in individual numbers in comparison to several years ago.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.2
• /
• pp.128-141
• /
• 2012

This study focused on the historic documents known as $deungnok$, records created during preparations for royal events in the $Joseon$ Dynasty, rather than the often cited $uigwe$, the documents describing the Royal Protocol of the $Joseon$ Dynasty. As a reference to the food served at royal banquets, the $deungnok$ can enhance our understanding of royal banquet foods. Seven specimens of $deungnok$ describing royal banquet foods are currently in existence, created during preparations for royal events by the agencies in charge of food, the $Saongwon$ and $Jeonseonsa$. Owing to the nature of their authorship, the details recorded in these $deungnok$ hold great value as important resources for the study of royal banquet cuisine. $Naeoejinyeon$-$deungnok$, which documented an $oejinyeon$ banquet held at the $Junghwajeon$ Pavilion in November 1902, was somewhat disorganized and fragmented. $Jinyeonuigwe$ was more inclusive and well-summarized, since the former were progress reports to the King during banquet preparations that listed various items separately, such as dishes for each table setting and the kinds of flower pieces, and thus did not present a complete picture of all the details as a whole. The latter, on the other hand, were final reports created upon completion of a banquet, and contained more comprehensive records not only of the $chanpum$ (the menu of dishes served), but also the sorts of tableware and tables, floral arrangements, location, scale, and installation date of the $sukseolso$ (temporary royal kitchens for banquets). They also offer a more effective summary by simplifying details duplicated in identical table settings. Nevertheless, the $Naeoejinyeon$-$deungnok$ recorded some facts that cannot be gleaned from the $Jinyeonuigwe$, including the height of some dishes presented in piled stacks, as well as the specific names of dishes and their ingredients. The comparative study of the historic records in the $deungnok$ and $uigwe$ will be helpful in identifying and understanding the specific foods served at royal banquets. The $oejinyeon$-$seolchando$ diagrams in $Naeoejinyeon$-$deungnok$ depict the table settings for the King and the Crown Prince. The two diagrams contain large rectangles divided into three sections. In each section are similar-sized circles in which the names of dishes and the titles for table settings are recorded. From these records we can see that the arrangements of the table settings for the King and the Crown Prince are similar. The relationships and protocols shown in the arrangement of dishes and table settings for the King and the Crown Prince at royal banquets in the $Seolchando$ appear to be consistent. By comparing the two references, $deungnok$ and $uigwe$, which recorded the dishes served at royal banquets, the author was able to determine the height of some foods served in stacked arrangements, the names of $chanpum$, the ingredients used, and the configuration of the $chanpum$. The comparative review of these two written records, $deungnok$ and $uigwe$, will be helpful for a proper understanding of the actual food served at royal banquets.

• Restorative Dentistry and Endodontics
• /
• v.14 no.2
• /
• pp.20-29
• /
• 1989

The purpose of the study is to evaluate the degree of the marginal leakage of class V cavities with 4 brands of esthetic filling materials by means of the dye penetration at the enamel & dentinal margins. 160 cavities of class V were prepared on the buccal & lingual surfaces of 80 extracted premolar teeth, which divided into 4 groups. The four groups of cavities were filled with Durafill$^{(R)}$-Durafill bond$^{(R)}$(KuIzer & Co GmbH), Bisfil M$^{(R)}$-Resin bond$^{(R)}$(BISCO Inc.), Silux$^{(R)}$-Scotchbond$^{(R)}$(3M Co.) and Fuji ionomer$^{(R)}$(type II, G-C Co.) each. All specimens were immersed in 2% methylene blue dye solution for 24 hours at $37^{\circ}C$ after a 30-second thermocycling at $4^{\circ}C$ and $60^{\circ}C$ and longitudinally sectioned with diamond disk into two parts. The results were as follows : 1. At enamel margins, the group filled with Durafill$^{(R)}$-Durafill bond$^{(R)}$, Bisfil M$^{(R)}$-Resin bond$^{(R)}$ and Silux$^{(R)}$-Scotchbond$^{(R)}$ show no significant difference each other(p>0.05), and the above groups show less marginal leakage comparing with the group filled with Fuji ionomer$^{(R)}$(p<0.01). 2. At dentinal margins, the group filled with Silux$^{(R)}$-Scotchbond$^{(R)}$ or Fuji ionomer$^{(R)}$ show less marginal leakage than that with Durafill$^{(R)}$-Durafill bond$^{(R)}$ or Bisfil M$^{(R)}$-Resin bond$^{(R)}$(p<0.01). 3. The enamel margins show less marginal leakage than dentinal margins in all the class V cavities(p<0.01).