• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.2
• /
• pp.90-96
• /
• 1991

This experiment was carried out in order to estimate the recovery days of root and stubble to the days after cutting, and contribution of specific stubble weight on the regrowth was examined using the relationships between the dry weight of shoot and yield components, and regrowth parameters by the days after cutting. The varieties examined were Maprima, Manhattan, Tove, Peramo, Caliente, Tempo and P-2 grown under individual plant basis. The results are may be summarized as follows: 1. Dry weight of root and stubble were recovered up to 13.5 and 11 days after cutting, respectively. 2. Dry weight of shoot(regrowth parts+stubble) was affected significantly by the varieties, stages of regrowth and variety x stage of regrowth. 3. The variety with tiller weight type showed higher average productivity of shoot than those of the variety with tiller number type. 4. Absolute growth rate(AGR) of shoot was correlated significantly with regrowth parts, stubble, root and weight of a tiller at the early stage of regrowth(up to 12 days after cutting), and correlated with regrowth parts, stubble, weight of tiller and stubble area at the late stage of regrowth(up to 20 days after cutting). 5. Contribution of specific stubble weight to absolute growth rate of shoot was different between the stages of regrowth. Thus, regrowth parts per specific stubble weight(RP1SSbW) and weight of tiller per specific stubble weight(WT1SSbW) contributed to absolute growth rate of shoot at the early stage of regrowth, and efficiency of specific stubble weight(ESSbW), regrowth parts per specific stubble weight (RPISSbW) and weight of a tiller per specific stubble weight(WT1SSbW) contributed to absolute growth rate of shoot at the late stage of regrowth. 6. Regrowth utilization rate(RUR) was one of the useful regrowth parameter to indicate the regrowth potential of grasses.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.1
• /
• pp.95-104
• /
• 2020

The purpose of this study is to develop a pipe type soil sampler that can easily collect soil cross section servey and soil samples to conduct ecological environment surveys while minimizing ecological disturbance in the area subject to soil survey. Furthermore, this study develop the exponential type estimation specific weight formula (ESWF) that uses pipe type soil sampler to easily carry out soil cross section survey and soil sample while estimating the specific weight of the area using water content and soil sample length variation ratio (SLVRs) and to obtain apparent specific gravity, hardness, and max. porosity which are used as growth of corps and ecological environment index. The calibration results of ESWF showed a high degree of significance, with NSE for actual specific weight (γ₀) and calibration estimation specific weight (γ_ec) 0.95, R² for 0.954, and RMSE for 0.051. The verification results of ESWF showed a high significance, with NSE for actual specific weight (γ₀) and verification estimation specific weight (γ_ev) 0.881, R² for 0.978, and RMSE for 0.055.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.7 no.1
• /
• pp.69-73
• /
• 2003

Specific leaf weight (SLW), defined as the mass of tissue per unit leaf area has been found to be an important physiological parameter as it indicates the relative thickness of leaves. Greater SLW provides more photosynthetic potential per unit area of leaf and hence it is frequently been considered as correlated with photosynthesis in several plant species. Collections of 165 mulberry (Morus sp.) germplasm accessions, both Indian and exotic in origin were evaluated for their variability with respect to SLW. The mean specific leaf weight ranged from 35.3 to $72.3 g/m^{-2}$. The distribution of SLW was found to be normal. High heritability (97.08%) and a small difference between genotypic and phenotypic variance demonstrates the genetic control over SLW. Significant heterotic effect with respect to SLW was observed in crosses when parents with high and low SLW were chosen.

• Journal of Ginseng Research
• /
• v.17 no.3
• /
• pp.224-227
• /
• 1993

Weight (g/root) and bulk density (g/$cm^3$) of tap root in 15-root-grade of 4-year-old white ginseng were investigated by specific gravity and weight-volume method. Bulk density measured by specific gravity ranged from 0.8 to 1.2g/$cm^3$ with almost normal distribution in frequency (number 1 of roots). Bulk density measured by volume-weight method had significant correlation with root weight. The percentage of high bulk density root (above 1.0) showed significant positive correlation with mean root weight or mean bulk density of root weight, indicating that the growth conditions for large root provide the better compactnes of root tissue.

• Journal of Life Science
• /
• v.10 no.2
• /
• pp.177-181
• /
• 2000

This study was conducted to estimate the genetic parameters such as combining ability, heritabilities and correlation coefficients forsome agronomic characters by 6$\times$6 dialled crosses of barley. The results obtained were summarized as follows. Mean squares of general combining ability(GCA) and specific combining ability(SCA) were significant for all characters observed. Mean squares of general combining ability for all characters were expressed as higher values than those of specific combining ability. Jecheon #5 showed the high general combining ability effects for culm length, and Waegwanpimack #1 showed the highest general combining ability effects for tiller number. Cygne also showed the high general combining ability effects for spike length and 1,000 grains weight. Furthermore, Plumage was expressed with the highest general combining ability effects for spike length and 1,000 grains weight. Furthermore, Plumage was expressed with the highest general combining ability effects for number of grains per spike. In specific combining ability effects, Samdugjeonbug # 45$\times$Plumage showed the high value for culm length, and Suwon #6 $\times$Waegwanpimack #1$\times$ was expressed with the highest specific combining ability effects for tiller number. Jecheon #5$\times$Plumage also showed the high specific combining ability effects for spike length and number of grains per spike. Suwon #6$\times$Cygne showed the high specific combining ability effects for 1,000 grains weight. The heritabilities of spike length an number of grains per spike were over 90%. In correlation coefficients among characters, relationships between culm length and tiller number, culm length and spike length, culm length and 1,000 grains weight, and spike length and 1,000 grains weight showed highly positively correlation.

• The Korean Journal of Pain
• /
• v.32 no.1
• /
• pp.12-21
• /
• 2019

Spinal cord contusion injury is one of the most serious nervous system disorders, characterized by high morbidity and disability. To mimic spinal cord contusion in humans, various animal models of spinal contusion injury have been developed. These models have been developed in rats, mice, and monkeys. However, most of these models are developed using rats. Two types of animal models, i.e. bilateral contusion injury and unilateral contusion injury models, are developed using either a weight drop method or impactor method. In the weight drop method, a specific weight or a rod, having a specific weight and diameter, is dropped from a specific height on to the exposed spinal cord. Low intensity injury is produced by dropping a 5 g weight from a height of 8 cm, moderate injury by dropping 10 g weight from a height of 12.5-25 mm, and high intensity injury by dropping a 25 g weight from a height of 50 mm. In the impactor method, injury is produced through an impactor by delivering a specific force to the exposed spinal cord area. Mild injury is produced by delivering $100{\pm}5kdyn$ of force, moderate injury by delivering $200{\pm}10kdyn$ of force, and severe injury by delivering $300{\pm}10kdyn$ of force. The contusion injury produces a significant development of locomotor dysfunction, which is generally evident from the $0-14^{th}$ day of surgery and is at its peak after the $28-56^{th}$ day. The present review discusses different animal models of spinal contusion injury.

• Food Science and Preservation
• /
• v.31 no.1
• /
• pp.33-45
• /
• 2024

Three spring potato varieties (Atlantic, Chubaek, and Superior) were cultivated for 80, 90, and 100 days and compared in terms of their total and marketable yields and specific gravities. Subsequently, changes in the quality parameters (weight loss, sprouting rate, disease incidence, dry weight, and specific gravity) of potatoes cultivated for 100 days were monitored during two-month storage in improved and semi-underground warehouses at 4℃ and room temterature. The productivities of Atlantic, Superior, and Chubaek were maximized at cultivation periods of 100, 100, and >90 days, respectively. In all cases, cold storage resulted in <5.3% weight loss and no marketability loss. However, two-month room temperature storage resulted in pronounced marketability loss due to weight loss (6.2, 7.3% and 10.9% for Atlantic, Superior, and Chubaek, respectively) and sprouting (in ~13%, >75%, and 99% of Atlantic, Superior, and Chubaek tubers, respectively). The marketability of Atlantic, Superior, and Chubaek during cold storage was maintained for >2, ~2, and <2 months, respectively. All varieties were characterized by rapid sprouting, low dry weight and specific gravity, and rapid marketability loss during storage.

• The Journal of the Korea Contents Association
• /
• v.20 no.2
• /
• pp.472-477
• /
• 2020

The purpose of this study is to correct the error of lower weight input method as an alternative to reduce the specific absorption rate(SAR) in MRI. In order to prove that the SAR values not change according to the weight entered into the patient information, the 50kg phantom is placed in the coil and the input weight is changed from 10 to 100 in 10kg units to compare the SAR values. As a result, T1-weighted images had a SAR rate of 0.2W/kg and T2-weighted images had an average of 0.4W/kg. In conclusions, the SAR does not change according to the weight input by the technician before the scan, a lower weight when inputting patient information cannot be an alternative to reduce the SAR.

• Communications of the Korean Mathematical Society
• /
• v.24 no.2
• /
• pp.303-319
• /
• 2009

Let $Q\;{\in}\;C^2$ : ${\mathbb{R}}\;{\rightarrow}\;[0,{\infty})$ be an even function. Then we will consider the exponential weights w(x) = exp(-Q(x)) in the weight class from [2]. In the paper, we will give some relations among exponential weights in this class and introduce a new weight subclass. In addition, we will investigate some properties of the typical and specific weights in these weight classes.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.18-25
• /
• 2002

Research to discuss the fire performance of materials requires tools for measuring their burning characteristics and validated fire growth models to predict fire behavior of the materials under specific tire scenarios using the measured properties as input for the models. In this study, burning characteristics such as time to ignition, weight loss rate, flame spread, heat release rate, total heat evolved, and effective heat of combustion for four types of wood-based materials were evaluated using the cone calorimeter and inclined panel tests. Time to ignition was affected by not only surface condition and specific gravity of the tested materials but also the type and magnitude of heat source. Results of weight loss rate, measured by inclined panel tests, indicated that heat transfer from the contacted flame used as the heat source into the inner part of the specimen was inversely proportional to specific gravity of material. Flame spread was closely related with ignition time at the near part of burning zone. Under constant and severe external heat flux, there was little difference in weight loss rate and total heat evolved between four types of wood-based panels. More applied heat flux caused by longer ignition time induced a higher first peak value of heat release rate. Burning characteristics data measured in this study can be used effectively as input for fire growth models to predict the fire behavior of materials under specific fire scenarios.