• The Journal of Korean Medicine
• /
• v.24 no.3
• /
• pp.1-10
• /
• 2003

Background : Asthma is a chronic inflammatory disorder under immunological influence. Gamichunggumgangwha-tang (CG, Jiaweiqingjinjianghuo-tang) and Gamiyukmigiwhang-tang (YM, Jiaweiliuweidihuang-tang) are herbal tonics for asthma from traditional herbal medicine. Objective : To evaluate the effect of CG and YM on immune cell & serum OA-specific IgE in broncho-alveolar lavage fluid (BALF) in a rat asthma model. Materials and Methods : Rats were sensitized with OA; at day I sensitized group and CG and YM groups were systemically immunized by subcutaneous injection of 1mg OA and 300mg of Al(OH)3 in a total volume of 2ml. At the same time, 1 ml of 0.9% saline containing $6{\times}10^9$ B. pertussis bacilli was injected by Lp. 14 days after the systemic immunization, rats received local immunization by inhaling 0.9% saline aerosol containing 2% (wt/vol) OA. A day after local immunization, BALF was collected from the rats. Rats were orally administered with each of CG and YM extract for 14 days since the day after local immunization. Lymphocyte, CD4＋ T cell and CD8＋ T cell counts, CD4＋/CD8＋ ratio in BALF, change of serum OA-specific IgE level, CD4＋ T cell and CD8＋ T cell percentages in the peripheral blood were measured and evaluated. Results : CG and YM showed an alleviating effect on asthmatic responses of rats. CG decreased total cell, lymphocyte, CD4＋ T cells in BALF, and serum OA-specific IgE level as compared with the control group. YM decreased lymphocytes as compared with the control group. CD4＋/CD8＋ ratio in BALF from the CG and YM groups and serum OA-specific IgE level from the YM group didn't show any significant variation from the control group. Conclusion : CG alleviated asthmatic hyperreactivity of the immune system through CD4＋ T cells and serum IgE. Further the study of this immune system modulating mechanism is expected.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.7
• /
• pp.701-710
• /
• 2013

The purpose of this study is to investigate experimentally the effect of low purity methanol (LPM) on performance and smoke emission characteristics by using a four-cycle, four-cylinder, water-cooled, direct injection diesel engine with EGR system. The experiments are performed by the change of engine load in the engine load ranges of 25 to 100% with an interval of 25% under the constant engine speed of 2000 rpm. The LPM in the fuel blends contained 24.88% water by volume. The blended fuel ratios of diesel oil to LPM are maintained at 100/0, 95/5, 90/10 and 85/15% on the volume basis. In this paper, EGR rates are varied in three conditions of 0, 12.8 and 16.5%. The result shows that the brake power of a blended fuel with 15% LPM is reduced more 11.1% than that of the neat diesel oil at the full load with the EGR rate of 16.5%. At this condition, also, the brake specific fuel consumption (BSFC) is increased by 3.2%, the exhaust gas temperature is decreased by 10.7%, the smoke opacity is decreased by 18.7% and the brake thermal efficiency is increased by 7.3%. The sharp reduction of smoke opacity for a blended fuel with the LPM content of 15% at the full load without EGR system is observed by 68.4% compared with that of the neat diesel oil due to the high oxygen content of LPM.

• Korean journal of food and cookery science
• /
• v.22 no.4 s.94
• /
• pp.477-487
• /
• 2006

The quality characteristics of dough and French breads containing dietary fibers, which were resistant starches (RS3 and RS4 types) and commercial non-starch polysaccharides (cellulose, pectin and chitosan), were investigated. The pH of the dough containing all dietary fiber except pectin was greater than that of control and was increased with increasing addition level. There was no correlation between pH and the expansion ratio of dough. As the level of added dietary fibers became high, the bread baking loss decreased, and the order of specific bread volume was 5% cellulose < 5% pectin < control bread, with no significant difference in specific volume. When a high level of dietary fibers was added to wheat flour, a complex phase appeared due to the formation between the network structure of additives and wheat gluten, and starch granules were heavily masted by the increased development of gluten-network matrix after the first fermentation like a wide spread net. Comparing the colorimetric changes of breads with the same added ratio (10%) of dietary fibers, the cellulose and RS4 addition breads had lower levels and the pectin-added bread had the highest value in the redness, while the chitosan-added bread had the highest value in the yellowness. Breads with a high level of dietary fibers showed increased hardness, gumminess, and brittleness and decreased springiness and cohesiveness. By sensory data, breads with 5% NSP and 10% RS addition showed high overall acceptability, with higher sensory RS score, compared to NSP addition. In conclusion, it was suggested that bread with lower than 10% RS or 5% NSP addition based on the amount of wheat flour, was acceptable with no considerable change in preference/overall quality and processing in bread-making.

• Carbon letters
• /
• v.1 no.3_4
• /
• pp.148-153
• /
• 2001

The initial irreversible capacity, $Q_i$, is one of the parameters to express the material balancing of the cathode to anode. We introduced new terms, which are the initial intercalation Ah efficiency (IIE) and the initial irreversible specific capacity at the surface ($Q_{is}$), to express precisely the irreversibility of an electrode/electrolyte system. Two terms depended on kinds of active-materials and compositions of the electrode, but did not change with charging state. MPCF had the highest value of IIE and the lowest value of $Q_{is}$ in 1M $LiPE_6$/EC + DEC (1 : 1 volume ratio) electrolyte. IIE value of $LiCoO_2$ electrode was 97-98%, although the preparation condition of the material and the electrolyte were different. $Q_{is}$ value of $LiCoO_2$ was 0~1 mAh/g. MPCF-$LiCoO_2$ cell system had the lowest of the latent capacity. $Q_{is}$ value increased slightly by adding conductive material. IIE and $Q_{is}$ value varied with the electrolyte. By introducing PC to EC+DEC mixed solvent, IIE values were retained, but $Q_{is}$ increased. In case of addition of MP, IIE value increased and $Q_{is}$ value also increased a little.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.288-288
• /
• 2013

Lithium-ion battery (LIB) is one of the most important rechargeable battery and portable energy storage for the electric digital devices. In particular, study about the higher energy capacity and longer cycle life is intensively studied because of applications in mobile electronics and electric vehicles. Generally, the LIB's capacity can be improved by replacing anode materials with high capacitance. The graphite, common anode materials, has a good cyclability but shows limitations of capacity (~374 mAh/g). On the contrary, silicon (Si) and germanium(Ge), which is same group elements, are promising candidate for high-performance LIB electrodes because it has a higher theoretical specific capacity. (Si:4200 mAh/g, Ge:1600 mAh/g) However, it is well known that Si volume change by 400% upon full lithiation (lithium insertion into Si), which result in a mechanical pulverization and poor capacity retention during cycling. Therefore, variety of nanostructure group IV elements, including nanoparticles, nanowires, and hollow nanospheres, can be promising solution about the critical issues associated with the large volume change. However, the fundamental research about correlation between the composition and structure for LIB anode is not studied yet. Herein, we successfully synthesized various structure of nanowire such as Si-Ge, Ge-Carbon and Si-graphene core-shell types and analyzed the properties of LIB. Nanowires (NWs) were grown on stainless steel substrates using Au catalyst via VLS (Vapor Liquid Solid) mechanism. And, core-shell NWs were grown by VS (Vapor-Solid) process on the surface of NWs. In order to characterize it, we used FE-SEM, HR-TEM, and Raman spectroscopy. We measured battery property of various nanostructures for checking the capacity and cyclability by cell-tester.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2C
• /
• pp.117-123
• /
• 2008

Disturbed and undisturbed decomposed granite soils with different weathering degrees were extracted and analyzed through a series of tests (CD test, constant P test, etc.) to assess their dilatancy characteristics. Here, dilatancy refers to the volume change that takes place during shearing. As a result, the decomposed granite soil dilatancy impact increased the mean effective stress while concurrently lowering the water content in drained shear tests. In the case of undisturbed decomposed granite soil, which has a lower weathering degree, the water content increased at specific limits during the shearing process. A linear relationship of ${\Delta}V_d/V_1=D{\cdot}(({\sigma}_1-{\sigma}_3)-{\sigma}_c)/{{\sigma}_m}^{\prime}$ forms between shearing-induced volume change and principal stress variance.

• Journal of the Korean Society of Radiology
• /
• v.7 no.2
• /
• pp.157-163
• /
• 2013

This study was to analyze quantitatively movement of planning target volume (PTV) and change of PTV volume through movement of diaphragm according to breathing phase. The purpose of present study was to investigate optimized respiration phase for radiation therapy of lung cancer. Simulated breathing training was performed in order to minimize systematic errors which is caused non-specific or irregular breathing. We performed 4-dimensional computed tomography (4DCTi) in accordance with each respiratory phase in the normalized respiratory gated radiation therapy procedures, then not only defined PTVi in 0 ~ 90%, 30 ~ 70% and 40 ~ 60% in the reconstructed 4DCTi images but analyzed quantitatively movement and changes of volume in PTVi. As a results, average respiratory cycle was $3.4{\pm}0.5$ seconds by simulated breathing training. R2-value which is expressed as concordance between clinically induced expected value and actual measured value, was almost 1. There was a statistically significant. And also movement of PTVi according to each respiration phase 0 ~ 90%, 30 ~ 70% and 40 ~ 60% were $13.4{\pm}6.4mm$, $6.1{\pm}2.9mm$ and $4.0{\pm}2.1mm$ respectively. Change of volume in PTVi of respiration phase 30 ~ 70% was decreased by $32.6{\pm}8.7%$ and 40 ~ 60% was decreased by $41.6{\pm}6.2%$. In conclusion, PTVi movement and volume change was reduced, when we apply a short breathing phase (40 ~ 60%: 30% duty cycle) range. Furthermore, PTVi margin considered respiration was not only within 4mm but able to get uniformity of dose.

• Journal of Society of Preventive Korean Medicine
• /
• v.5 no.2
• /
• pp.93-105
• /
• 2001

BACKGROUND : Changiga is a hetnal medicine which has been used of the traditional therapeutic agent of asthma. So I examine the effect of Changija on immune Cell&serum OA-specific IgE in BALF in rat asthma model. MATERIAL and METHODS : Rats were sensitized with OA; at day 1 sensitized group and Changiga(CIG) groups were systemically immunized by subcutaneous ingection of 1mg OA and 300mg of Al(OH)3 in a total volume of 2ml. At the same time, 1ml of 0.9% saline containing $6{\times}109$ B. pertussis bacilli was injected by i.p. 14 days, after the systemic immunization, rats received local immunization by inhaling 0.9% saline aerocol containing 2%(wt/vol) OA, A day after local immunization, BAL fluid was collected from the rats. A day after local immunization, rats were orally administered with Changiga extract 14 days, Lymphocyte, CD4+ T-cell CD8+ T-cell counts, CD4+/CD8+ ratio in BALF, change of serum OA-specific IgE level in the peripheral blood were measured and evaluated. RESULT : Changiga showed a suppressive effect on a rat asthme model. Changiga decreased lymphocyte, CD4+ T-cell, CD4+/CD8+ ratio in BALF, serum OA-specific IgE level as compared with the control group, whereas Changiga decreased CD8+ T-cell in BALF with statistical nonsignificance as compared with the control group. CONCLUSION: This study shows that Changiga have a suppressive effect on rat allergic athma model. Changiga would be useful allergic asthma treatment agent.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.1 no.4
• /
• pp.297-304
• /
• 1989

Development of a more satisfactory program of computing the performance on a multi-tube evaporator with continuous plate fins is attempted in this study. The fluid flow involving a change of phase make the flow properties and fluid friction factor of refrigerants, the heat transfer coefficients of refrigerant and air sides vary significantly. Taking such variations into account, a useful program is developed to predict the steady state performance of a multi-tube evaporator. The program was applied to an evaporator which has outside diameter of 10.05mm, inside diameter of 9.35mm, length of 5.4m and two rows arraied staggered. Then the variations of refrigerant quality, temperature, pressure, velocity, enthalpy, specific volume and air temperature, tube temperature were discussed. Satisfactory results were presented that the degree of superheat at the outlet side was $4.4^{\circ}C$ and the air temperature drop between the inlet and outlet of the air conditioner was $10^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.25 no.5
• /
• pp.532-540
• /
• 1988

Even the finest cement as having a specific surface area of 6.000~8.500$\textrm{cm}^2$/g (Blaine) is to convert into low-porosity hardened cement paste by the use of appropriate plasticizer. In this study, tests were carried out on such a special cement mix(fineness of 6.000$\textrm{cm}^2$/g, Ca-lignosulfonate plus k2CO3 as plasticizer and W/C=0.25) in comparison with ordinary Portland cement. Owing mainly to the high fineness of the cement powder and the low water-to-cement ratio, the hardened low-porosity cement paste showed a very tight microstructure, the pore texture of which consisted of micropores and wide pores only of small radii. The consequence of such mix was hence that the low-porosity special cement had excellent properties of early-high and very high strengths as compared to ordinary Portland cement. Its volume change when dried in the air or re-wetted, exhibited superor behaviour as well.