• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.1
• /
• pp.21-28
• /
• 2019

Reversible solid oxide fuel cell (ReSOC) system was integrated with waste steam for electrical energy storage in distributed energy storage application. Waste steam was utilized as external heat in SOEC mode for higher hydrogen production efficiency. Three system configurations were analyzed to evaluate techno-economic performance. The first system is a simple configuration to minimize the cost of balance of plant. The second system is the more complicated configuration with heat recovery steam generator (HRSG). The third system is featured with HRSG and fuel recirculation by blower. Lumped models were used for system performance analyses. The ReSOC stack was characterized by applying area specific resistance value at fixed operating pressure and temperature. In economical assessment, the levelized costs of energy storage (LCOS) were calculated for three system configurations based on capital investment. The system lifetime was assumed 20 years with ReSOC stack replaced every 5 years, inflation rate of 2%, and capacity factor of 80%. The results showed that the exergy round-trip efficiency of system 1, 2, 3 were 47.9%, 48.8%, and 52.8% respectively. The high round-trip efficiency of third system compared to others is attributed to the remarkable reduction in steam requirement and hydrogen compression power owning to fuel recirculation. The result from economic calculation showed that the LCOS values of system 1, 2, 3 were 3.46 ¢/kWh, 3.43 ¢/kWh, and 3.14 ¢/kWh, respectively. Even though the systems 2 and 3 have expensive HRSG, they showed higher round-trip efficiencies and significant reduction in boiler and hydrogen compressor cost.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.529-535
• /
• 2018

The range extender vehicle runs on a mechanism that allows the small power generation engine to start in the most efficient specific operating range to charge the battery and extend the mileage. In this study, we developed a step motor type intake air supply system that replaces existing throttle body system to develop a simple low cost control logic system. The system was applied to the existing base engine, and in order to improve the performance by increasing the amount of intake air, the effect of changing the length of the intake and exhaust manifold was experimentally examined. As a result, the Type B intake air control actuator operated by one step motor showed higher performance than the Type A in all the operation region, but the performance was lower than that of the base engine due to the increase of flow resistance. To improve this, it was confirmed that the engine performance was improved at both speeds of 2200rpm and 4300rpm when the 140mm adapter was installed in the intake manifold and when the newly designed 70mm exhaust manifold was applied. Through this process, high - precision operation control was realized by connecting the generator load to the optimized engine for the range extender electric vehicle. Experimental results showed that the speed change rate was within ${\pm}2.5%$ at 2200rpm in 1st stage and 4300rpm in 2nd stage and the speed follow-up result of 610 rpm/s was obtained when the speed was increased from 2200rpm to 4300rpm.

• Research in Plant Disease
• /
• v.25 no.1
• /
• pp.16-21
• /
• 2019

Botrytis cinerea is the pathogen for a gray mold generating problems during the cultivation and transportation of roses. But there is little information about the difference of the symptom severity caused by gray mold on rose varieties and pathogen strains. 16 strains were collected from the rose cultivation area to confirm the degree of disease occurrence against strains and each variety. Collected 16 strains were identified based on the sequences analysis of ITS region of ribosomal DNA by using specific primers. The sequence analysis was performed by comparing the sequences to find a difference. To confirm the difference in disease occurrence for each strains, the difference was classified from 0 to 5 stages using charmant variety as a control. The data was confirmed through Kruskal-Wallis ANOVA. The result showed the significant difference in the pathogenicity caused by strains. WNG6_5 showed the lowest pathogenicity with 0.24 and WNG6_3 showed the highest with 3.20. The difference between two strains were almost 3.0. In addition, nine varieties of roses were more investigated with three strains such as the strains of WNG6_5, Hwa_1, and WNG6_3. The result showed that the Love Letter variety showed resistance and the Ice Bear variety was sensitive to three strains. Taken together, this study showed the significant difference by the interactions of rose varieties and gray mold strains.

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.672-678
• /
• 2011

In this work, carbon fibers were electrolessly Ni-plated in order to investigate the effect of metal plating on the electromagnetic shielding effectiveness (EMI-SE) of Ni-coated carbon fibers-reinforced epoxy matrix composites. The surfaces of carbon fibers were characterized by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Electric resistance of the composites was tested using a 4-point-probe electric resistivity tester. The EMI-SE of the composites was evaluated by means of the reflection and adsorption methods. From the results, it was found that the EMI-SE of the composites enhanced with increasing Ni plating time and content. In high frequency region, the EMI-SE didn't show further increasing with high Ni content (Ni-CF 10 min) compared to the Ni-CF 5 min sample. In conclusion, Ni content on the carbon fibers can be a key factor to determine the EMI-SE of the composites, but there can be an optimized metal content at a specific electromagnetic frequency region in this system.

• Journal of Navigation and Port Research
• /
• v.46 no.3
• /
• pp.168-178
• /
• 2022

In this study, the resistance test, the vertical static angle of the attack test and VPMM test will be conducted to estimate the maneuverability of underwater vehicles with ahead propeller. The vertical static test will be conducted within the range of -40deg to 40deg, to investigate the cross-flow drag at high incidence angles. The tests will be conducted by dividing the propeller rotation into a case in which the propeller rotates at a specific rpm, and a case in which the propeller rotates naturally, according to the towing speed. Hydrodynamic coefficients of vertical direction will be estimated by the captive model tests. Additionally, the vertical dynamic stability index based on estimated hydrodynamic coefficients will be calculated and the impact of the propeller revolution state on the index will be investigated. The results are expected to be used as reference test data for underwater vehicles with ahead propeller.

• Biomolecules & Therapeutics
• /
• v.30 no.6
• /
• pp.553-561
• /
• 2022

Chronic myeloid leukemia (CML) is a slowly progressing hematopoietic cell disorder. Sphingosine kinase 1 (SPHK1) plays established roles in tumor initiation, progression, and chemotherapy resistance in a wide range of cancers, including leukemia. However, small-molecule inhibitors targeting SPHK1 in CML still need to be developed. This study revealed the role of SPHK1 in CML and investigated the potential anti-leukemic activity of hirsuteine (HST), an indole alkaloid obtained from the oriental plant Uncaria rhynchophylla, in CML cells. These results suggest that SPHK1 is highly expressed in CML cells and that overexpression of SPHK1 represents poor clinical outcomes in CML patients. HST exposure led to G2/M phase arrest, cellular apoptosis, and downregulation of Cyclin B1 and CDC2 and cleavage of Caspase 3 and PARP in CML cells. HST shifted sphingolipid rheostat from sphingosine 1-phosphate (S1P) towards the ceramide coupled with a marked inhibition of SPHK1. Mechanistically, HST significantly blocked SPHK1/S1P/S1PR1 and BCR-ABL/PI3K/Akt pathways. In addition, HST can be docked with residues of SPHK1 and shifts the SPHK1 melting curve, indicating the potential protein-ligand interactions between SPHK1 and HST in both CML cells. SPHK1 overexpression impaired apoptosis and proliferation of CML cells induced by HST alone. These results suggest that HST, which may serve as a novel and specific SPHK1 inhibitor, exerts anti-leukemic activity by inhibiting the SPHK1/S1P/S1PR1 and BCR-ABL/PI3K/Akt pathways in CML cells, thus conferring HST as a promising anti-leukemic drug for CML therapy in the future.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.3
• /
• pp.179-191
• /
• 2022

Carbapenem-resistant Enterobacteriaceae (CRE) poses an increasing public health threat and has limited treatment options with high associated mortality. Genotypes of carbapenemase that threaten public health (bla_KPC, bla_NDM, bla_IMP, and bla_VIM) and bla_OXA-48-like genes were detected by phenotypic and molecular diagnosis, and related gene distribution patterns were investigated. Phenotypic testing using the modified Hodge test confirmed positivity in all 41 strains examined, and carbapenemase inhibitory testing using meropenem+phenyl boronic acid or meropenem+EDTA confirmed positivity in 18 and 8 strains, respectively. Polymerase chain reaction revealed the presence of amplification products in 28 strains of bla_KPC, 25 strains of bla_NDM, 5 strains of bla_IMP, 1 strain of bla_VIM, and 13 bla_OXA-48-like strains. In addition, 7 strains of bla_KPC+bla_NDM, 1 strain of bla_KPC+bla_IMP, 1 strain of bla_NDM+bla_OXA-48-like, 1 strain of bla_NDM+bla_VIM, 4 strains of bla_KPC+bla_NDM+bla_IMP, and 4 strains of bla_KPC+bla_NDM+bla_OXA-48-like were identified. Melting curve analysis using real-time PCR was wholly consistent with PCR results. The study shows genetic identification of highly specific CRE by real-time PCR could be used to provide early diagnoses and infection control, improve surveillance, and prevent the transmission of CRE.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.3
• /
• pp.203-211
• /
• 2021

Recently, the insulaton design standards for reducing the energy use of buildings have been strengthened. Althoug insulation work is the most cost-effective method for reducing the primary energy consumption per unit area of a building, there are no evaluation criteria for insulation performance at the time of construction and completion inspection. The purpose of this study is to provide objective data by establishing a standard for an analysis method and a method for easily experimenting with the exterior wall thermal transmittance of an apartment house using a thermal transmittance measuring device(TESTO 435). For the exterior wall of the test subject, the specific heat per unit area exceeded 20kJ/(m²·K), and the data at the end point suitable for ISO 9869-1 were analyzed by the average method. The measured values of the thermal transmittance for 3 consecutive days converged within +5% of the desing value, and the standard deviation of the thermal transmittance by day decreased in the order of 1-Day > 3-Day > 2-Day. The standard deviation of the thermal transmittance by time period decreased in the order of 00:00~24:00 < 19:00~07:00 < 00:00~07:00. The measured value of the thermal transmittance for the time perion of 00:00 to 07:00 per day almost coincided with an error of -3% to + 2% compare to the desing value.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.270-279
• /
• 2022

In this paper, system dynamics considering dynamics and time was examined to study the changes in system structure according to reinforcement (policy intervention) of regulation and punishment for fishing boats, and the strategizing directions were analyzed. Until now, regulations and punishments on fishing boats have been conducted temporarily and short-term as a precautionary measure to prevent accidents and imposed penalties. However, due to various anomalous side effects, the expected results were not achieved, negligent accidents occurred constantly, and follow-up measures were repeated. Resultantly, the regulation and punishment of fishing boats is a reinforced safety standard, and there is a necessity to improve facilities, equipment, and industry, and develop technology (including time delay) to prevent accidents. However, as the negative (illegal) activities continue without immediate and significant resistance, the safety blind spot for accident prevention cannot be minimized. Thus, policy intervention based on linear thinking without sufficiently considering variables of the dynamic mechanism and time can distort the basic values pursued by the policy. For the regulation and punishment of fishing boats, a strategy to supplement the mechanism should be prepared prior to the preparation of reinforced safety standards. Improvement and development of related technologies, mandatory training hours for anglers, fishing industry, and related organizations, proposal of specific action plan for Fishing Management and Promotion Act for growing fishing-related industries.

• Journal of Life Science
• /
• v.32 no.12
• /
• pp.956-961
• /
• 2022

Plant Chloroplast have several advantages as an expression platform of biopharmaceuticals over conventional expression platforms such as mammalian cells, yeast and bacteria. First, plants do not serve as a host for mammalian infectious virus and have endotoxin like bacteria which can cause anaphylactic shock. In addition, high copy number of chloroplast genome allows for chloroplast transformants to reach the high level of expression of heterologous genes. Moreover, the integration of transgenes into specific region of chloroplast genomes makes chloroplast transformants unaffected by positional effect which can be frequently observed from nuclear transformants, resulting in loss of transgene expressions. Antimicrobial peptides (AMPs) are a kind of innate immunity which is found from bacteria to humans. Unlike conventional antibiotics, very less dosage of AMPs can have catastrophic effect on bacterial survival. Further, the repeated use of AMPs does not trigger the development of bacterial resistance. Moricin, one of the AMPs, was isolated from Bombyx mori, a silkworm moth. The C-terminal of moricin consists largely of basic amino acids, and the N-terminal has an α-helix structure. Moricin was chosen and expressed in a SUMO/SUMOase without leaving any unwanted amino acids which could potentially affect the anti-bacterial activity of the moricin. The transformation vector used in this study has already been created in this lab for the expression in both prokaryotic systems such as E. coli and chloroplast. The expressed moricin was purified using Ni columns and SUMOase, and the antibacterial activity of the purified moricin was confirmed using an agar diffusion assay.