• Electrical & Electronic Materials
• /
• v.8 no.5
• /
• pp.633-639
• /
• 1995

Dropouts in magnetic media are a primary quality deficiency which is detrimental to magnetic signal quality and thus the major impediment to error-free recording, especially in high density digital recorders. The specific form of defects and causes found to be responsible for signal dropouts occurring in magnetic tape were studied. Dropout occurred when the RF signal falls to low level due to the various types of surface defects. However, the fall in the level of the RF signal in gravure roll coated tapes was most often caused by foreign particles adhering to the magnetic tape. It was also shown from the present study that scattered particles trapped under the tape surface or put on the top can lift it as it crosses the head, creating a spherical tent shaped defect and causing a temporary signal drop. Dropout producing substances were identified through optical and microchemical analyses. The results were correlated with measured electrical signal losses combined with analytical microscopy to clarify source identification of defects.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.5
• /
• pp.547-552
• /
• 2017

The viral hemorrhagic septicemia virus (VHSV) has an extensive host range, and infects farmed and wild fish inhabiting both freshwater and marine ecosystems. Enzyme-linked immunosorbent assay (ELISA) is highly useful in diagnosing viral hemorrhagic septicemia. However, ELISA shows high, non-specific background reaction with fish antibodies. In this study, we optimized the antigen and antibody concentrations used for detecting specific antibodies in VHSV-infected olive flounder to reduce non-specific binding, and improve the sensitivity of ELISA. The results suggested that OD (optical Density) values were valid when ELISA was performed with $0.1{\mu}g/well$ of virus, involving blocking with blocking buffer (Roth, Roti-Block), 1:300-1:600 dilution with flounder antisera, and 1:1000 dilution with anti-flounder IgM and HRP-conjugated goat anti-mouse IgG for detecting the VHSV antibody in flounder sera. Furthermore, 11 different VHSV strains isolated in Korea from 2012 to 2016 were used to infect the fish. The results showed no correlation between viral pathogenicity and antibody production. This research is a basic study on the application of antibody detection in the diagnosis of viral hemorrhagic septicemia in the olive flounder.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.2
• /
• pp.36-40
• /
• 2009

In this paper we discuss about the practical implementation of a combined CO and CO2 dual sensor module that is adapted by NDIR (Non-Dispersive Infrared) method that measures the absorbance of gas like CO and CO2 by using gas particles' characteristics that absorb specific wave lengths of infrared ray. NDIR has a long life time, excellent measurement and precision compared to the existing contact types or chemical types of CO2 sensors. Since optical cavity technology that had been developed until now can measure CO2 only we research and develop an optimal optical cavity design and density-temperature calibration technologies that can measure CO and CO2 at the same time and is important to decide the performance of the sensor module according to well-designed wave guides of the different length.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.315-324
• /
• 2001

Mechanochemical effects that occurred in the fine grinding process of quartz particles using planetary ball mill was investigated. Quartz particles have been frequently utilized for optical materials, semiconductor molding materials. We determined that grinding for a long time can be create amorphous structures from the crystalline quartz by Mechanochemical effects. But, to be produced nano-composite particles that the critical grinding time reached for composite materials in a short time. Henceforth, a qualitative estimation must be conducted on the filler for EMC(Epoxy molding compound) materials. It can be produced mechanochemically treated composite materials and also an integrated grinding efficiency considering of the nano-composite amorphous structured particles. The mechanochemical characteristics were evaluated based on particle morphology, size distribution, specific surface area, density and the amount of amorphous phase materials into the particle surface. The grinding operation in the planetary ball mill can be classified into three stages. During the first stage, initial particle size was reduced for the increase of specific surface area. In the second stage, the specific surface areas increased in spite of the increase in particle size. The final stage as a critical grinding stage, the ground quartz was considered mechanochemically treated particles as a nano- composite amorphous structured particles. The development of amorphous phase on the particle surface was evaluated by X-ray diffractometry, thermal gravity analysis and IR spectrometer. The amount of amorphous phase of particles ground for 2048 minutes was 85.3% and 88.2% by X-ray analysis and thermal gravity analysis, respectively.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.4
• /
• pp.42-48
• /
• 1998

The bacterial cellulose(BC) has many unique properties that are potentially and commercially beneficial. In order to enhance inherently inferior physical property of chemithermomechanical pulp(CTMP) sheet, chemical pulp has been used widely. Bacterial cellulose also has an enhanced sheet strength because of its unique physical and morphological features. This study was carried out to inverstigate the effect of BC addition on physical properties of CTMP sheets. The effect of BC addition on its optical properties was also discussed. The apparent density, internal bond strength, Young's modulus, tensile strength and folding endurance of CTMP sheet are increasing with increase of BC contents. This strength increase would be attributed to the increase of relative bonding sites among pulp fibers by addition of BC which has microfibrillar structure with very high specific surface areas. There were not so significant changes in opacity of CTMP sheet upto 20% addition level of BC, while over 40% addition, the opacity gradually decreased and levelled off. Porosity is decreased with addition of BC. This decrease would be attributed to densification of sheet by fine and filamentous structure of BC fibers.

• Journal of Life Science
• /
• v.11 no.1
• /
• pp.76-82
• /
• 2001

Fifteen species of microorganisms were isolate form the intestines of fishes, fish feed, and ferment. Eleven microorganisms except HY4, HY8, HY12, and HY13 were Gram-positive, and HY1, HY2, HY3, HY5, HY6, and HY7 produced lactic acid. The species of HY1, HY2, HY3, HY4, HY5, HY6, HY13, and HY14 showed some growth in the medium containing 1% of NaCl. Except HY6, HY7, HY8, HY12 and HY5, 10 isolates had proteolytic activity, whereas only HY13 and HY14 had lipase activity. From all the results four isolates (HY3, HY4, HY13 and HY14) were chosen for the degradation of fish wastes. There was no mutual inhibition among the microorganisms, and the optimum temperature and pH for the growth of the mixed culture were found to be 3 2$\^{C}$ and 7, respectively. Under the optimum growth conditions the maximum optical density and the maximum specific growth rate were estimated to be 2.35 and {TEX}$0.46h^{-1}${/TEX}, respectively. Major microorganisms in the mixed culture at the log-phase were HY3 and HY4, which occupied 70%. The degrading efficiency of fish waste by the mixed microorganisms was 2.3 times higher, compared to control. The total amount of free amino acids in the degraded products from fish wastes was 39g/100g protein and little odor was produced by the mixed microorganisms after 48 hours.

• Journal of Ginseng Research
• /
• v.9 no.2
• /
• pp.256-263
• /
• 1985

In order to investigate the inferior factor of red ginseng quality, the contents of various chemical components, physico-chemical properties and arrangement state of ginseng cells were observed. Contents of total reducing sugar, reducing sugar, crude protein, crude fibre and specific gravity of inside white part of red ginseng were less than those of normal part. But differences in content of crude saponin, HPLC pattern of ginsenosides and reducing ability for DP P H(1,1-dipheny 1-2-picrylhydrazyl) between normal and inside white part of red ginseng were not found. The optical density of 1 water extract of normal part of red ginseng did not differ from that of inside white 1 part of red ginseng, but the visible and UV absorbance of acid hydrolyzate of normal red ginseng showed higher than those of inside white part of red ginseng. The differences in the internal color and tissue of normal and inside white part of red ginseng were easily found with naked eye, and by the microscopic fractography, the orangement state of ginseng cell in the inside white part of red ginseng was less dense than that in normal red ginseng.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.71.1-71.1
• /
• 2012

We have identified local analogs of strong $H{\alpha}$ Emitters (HAEs) that dominate the z~4 Lyman-break galaxy population using the Sloan Digital Sky Survey (SDSS). At z<0.4, only 0.04% of galaxies are classified as HAEs with $H{\alpha}$ equivalent width larger than $500{\AA}$, comparable to that of z~4 HAEs. The $H{\alpha}$-to-UV luminosity ratio of local HAEs is consistent with that of z~4 HAEs, indicating relatively large specific star formation rate in these galaxies compared to traditionally studied UV-selected Lyman break analogs. Local HAEs are young, less evolved galaxies with low metallicity. It is still difficult to constrain whether the star formation in local HAEs is powered by minor mergers or by cosmological cold gas accretion. However, the stacked optical spectrum of local HAEs shows several strong ionization lines, for example HeII 4686 emission line, which are shown in Wolf-Rayet galaxies. Thus it is highly likely that local HAEs are galaxies with an elevated ionization parameter, either due to a high electron density or large escape fraction of hydrogen ionizing photons.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.6
• /
• pp.979-985
• /
• 2001

A fluorometric detection technique for HDL (High Density Lipoprotein) and LDL (Low Density Lipoprotein) was developed for application in a fiber-optic immunosensor using a protein A Langmuir-Blodgget (LB) film. For the fluorescence immunoassay, antibodies specific to HDL or LDL were imobilied on the protein A LB film, and a fluorescence amplification method was developed to overcome their weak fluorescence. The deposition of protein A using the LB technique was monitored using a surface pressure-are $({\pi}-A)$ curve, and the antibody immobilization of the protein A LB film was experimentally verified. The immobilized antibody was used to separate only HDL and LDL from a sample, then the fluorescence of he separated HDL or LDL was amplified. The amount of LDL or HDL was measured using the developed fiber optic fluorescence detection system. The optical properties resulting from the reaction of HDL or LDL with o-phtaldialdehyde, detection range, response time, and stability of the immunoassay were all investigated. The respective detection ranges for HDL and LDL were sufficient to diagnose the risk of coronary heart disease. The amplification step increased the sensitivity, while selective separation using the immobilized antibody led to linearity in the sensor signal. The regeneration of the antibody-immobilized substrate could produce a stable and reproducible immunosensor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.2
• /
• pp.142-147
• /
• 2015

The artificial light sources for growth of plant are usually high-pressure sodium lamp, metal haloids lamp, and fluorescent light; however, these light sources have relatively weaker Red and Blue lights that are necessary for growth of plants. Especially the effect of Photosynthetic Photon Flux Density (PPFD) is pointed out as the weakness. Meanwhile, LED light source can be selected by specific wavelength to greatly improve the effect of PPFD. In this regard, this paper aims to investigate the promotion of plant growth by measuring photosynthetic photon flux density (hereafter referred to as PPFD) according to changes in light quality of the LED light sources. Towards this end, LED light sources for plant growth were produced with 4 kinds of mono-chromatic lights and 6 kinds of combined lights by mixing red, blue, green and white lights. A comparative analysis was conducted to investigate the effects of optical properties and PPFD on plants (green leaf lettuce) using the produced light sources. The results monochromatic light has fastest growth rate, but plant growth conditions have poor. This being so, mixed light is suitable for the green leaf lettuce.