• 한국광물학회지
• /
• 제20권4호
• /
• pp.289-302
• /
• 2007

전라남도 신안군 자은도의 둔장해수욕장 해변으로부터 채취한 해빈사로부터 중광물 회수공정을 실시하여, 중광물의 특징 및 회수 가능성에 대한 연구를 수행하였다. 채취 시료는 깊이별로 상부, 중부 및 하부시료로 구분한 뒤 각각에 대하여 spiral separation을 실시하여 얻은 중광물군을 초기물질로 3차에 걸친 중광물 선별작업을 실시하였다. 본 역에서 배태되어 있는 중광물로 티탄철석, 저어콘, 금홍석, 아나타제, 모나자이트 및 제노타임 등이 관찰되었다. 3차에 걸친 Table separation을 실시한 결과, 맥석광물인 석영, 정장석, 알바이트 및 백운모가 여전히 존재하였다. 따라서 부가적으로 비중선별이 추가적으로 요구된다. 수선을 통한 중광물의 선별을 실시한 결과, 각 중광물의 다양한 원마도 및 색깔을 보임으로써, 배태된 중광물들이 다양한 성인에 의해 형성되었음을 시사하고 있다.

• 자원리싸이클링
• /
• 제12권4호
• /
• pp.44-50
• /
• 2003

혼합되어 배출되는 플라스틱을 분리 및 선별하기 위한 기존의 방법들은 플라스틱 비중의 유사성, 입도의 제한 등의 요인으로 인해 단일재질의 플라스틱으로 분리하는데 많은 어려움이 따른다. 본 연구에서는 플라스틱의 재질별 연화온도와 점착 특성이 다른 점에 착안하여 열 점착 방식을 이용하여 혼합 플라스틱을 분리하는 방식을 개발하고자 하였다. 일상생활에서 사용되는 범용수지를 시료로 이용, batch 방식의 실험장치를 제작하여 온도를 변화시키면서 각 플라스틱의 점착 온도 범위, 점착율을 실험적으로 조사하였다. 또한 접촉시간과 플라스틱의 착색제의 유무, 입자 크기 등 다양한 조건들을 변화시키면서 그에 따른 영향을 조사하였으며 이를 실제 혼합 폐 플라스틱에 적용하여 분리효율을 조사하였다. 실험 결과 혼합 플라스틱에서 비중이 유사한 LDPE와 HDPE, PET와 PVC, 그리고 PP와 PVC 등을 온도의 변화에 의해 선택적으로 분리할 수 있음을 확인하였다.

• 한국양식학회지
• /
• 제18권3호
• /
• pp.180-188
• /
• 2005

The separation performances for thirty different dimensions of a low-pressure hydrocyclone (LPH) were tested in order to obtain an optimum dimension scale for fecal solid removal from an aquaculture system. The geometric variables were considered on two inlet diameters (Di: 30 and 50 mm), five overflow diameters (Do: 30, 50, 60, 70 and 100 mm), and three cylinder lengths (Lc: 250, 345 and 442 mm), while the cylinder diameter (Dc) of 335 mm, underflow diameter (Du) of 50 mm and cone angle (${\theta}$) of $68^{\circ}$ were kept constant. A small size for carp feces was regarded as the target for the removal of solids. Spherical polystyrene particles (1.1-1.3 mm dia., ${\rho}_s=1.05g/cm^3$), which demonstrate a similar settling velocity and specific gravity to the carp feces, were used as feed. The separation performance was tested in the range of 330 to 1200 ml/s of the inflow rate. Experimental results using ANCOVA and the Tukey test (${\alpha}=0.05$) demonstrated that the separation performances of LPH were significantly affected (P<0.05) by fi, Di and Do. In contrast, there was no significant Lc effect (P>0.05) on the separation performances. The maximum separation performance was detected at dimension combinations of 30 mm of inflow diameter (Di), 50, 60 and 70 mm of overflow diameter (Do), 345 mm of cylinder length (Lc). The dimension proportions were 0.09, 1.03, 0.15-0.21 and 0.15 (or Di/Dc, Lc/Dc, Do/Dc and Du/Dc, respectively.

• 한국지반환경공학회 논문집
• /
• 제14권11호
• /
• pp.25-31
• /
• 2013

민간 및 군용사격장은 납, 구리 등의 중금속으로 오염되어 있어 복원이 필요한 경우가 많다. 산세척 또는 용출제를 이용한 용출이 흔히 사용되는 복원공법이다. 사격장 오염토양을 채취하여 오염특성 및 고비중 입자의 기여율을 조사하기 위한 기초연구를 수행하였다. 사격장 오염토양은 중금속, 특히 납으로 오염되어 있었으며, Ethylenediamine Tetra Acetic Acid(EDTA)를 이용한 5회 반복추출에도 환경기준치 이상의 오염이 토양시료에 남아 있었다. 이는 토양시료에 계속적으로 오염을 유출하는 입자가 존재하거나 오염제거가 매우 어려운 상태로 오염이 존재한다는 것을 의미한다. 토양시료에 포함된 색을 띠는 특이입자를 분리하여 분석한 결과 이들 입자는 비중이 2.5-6.6이고, 납과 EDTA의 결합율이 4.9-32%로 탄두 및 탄피가 잘게 부서진 입자로 판단되었다. 이들 입자를 제거한 토양은 오염도가 제거하기 전 토양에 비하여 낮으며, 용출 등의 기술로 쉽게 오염이 제거될 수 있음을 보여주었다. 이러한 결과는 연속추출 및 TCLP 등의 연구에서 증명되었다.

• 상하수도학회지
• /
• 제20권5호
• /
• pp.677-684
• /
• 2006

Electro-flotation(EF), a novel sludge thickening method, could improve the dewaterability of activated sludge. The gas(microbubbles) generated during EF decreased the solid-liquid separation time below 1/5 of the time required for gravity sedimentation. In addition, over 90% of the sludge volume reduction could be achieved by EF although the settling characteristics of the sludge was very poor. The SRF(specific resistance to filtration) of the thickened sludge by EF was much lower than that of the sludge thickened by gravity sedimentation. The SRF of the thickened sludge decreased exponentially with increase of gas generation rate of the EF system. Gas generation rate could be controlled by varying the current density of the electrode. Degasing of the microbubbles by vigorous mixing of the thickened sludge layer deteriorated the dewaterability of the sludge. Therefore, it is obvious that the gas bubbles entrapped in the thickened sludge play a key role in the observed dewaterability improvement.

• 동력기계공학회지
• /
• 제5권1호
• /
• pp.64-72
• /
• 2001

According to the regulation of IMO, oil discharge from ships is allowed under 15ppm only and an oil filtering equipment is essential. However, for large ships using heavy fuel oil of over S.G 0.98 and viscosity 380cSt and system oil, it has been in difficulty to process with existing filtering type of oily water separator. A parallel plate type oily water separator which is one of gravity type separators can be used as an assistant equipment for the oil filtering system to meet the present IMO standard of 15 ppm, because it is an efficient method in dealing with a large amount of rich oil with high specific gravity. This work is focused on the fundamental investigation of the performance of the plate type oily water separator by visualization method and PIV(Particle Image Velocimetry) measurement to acquire multi-point velocity data simultaneously. The experimental results showed that the space of the plates acts a significant role in separating process and it was found that an important point to minimize a vortex flow is to flow a large amount of fluid in space of the plates in order to promote the efficiency of separation.

• Parasites, Hosts and Diseases
• /
• 제47권4호
• /
• pp.353-357
• /
• 2009

Cryptosporidium can cause gastrointestinal diseases worldwide, consequently posing public health problems and economic burden. Effective techniques for detecting contaminated oocysts in water are important to prevent and control the contamination. Immunomagnetic separation (IMS) method has been widely employed recently due to its efficiency, but, it is costly. Sucrose floatation technique is generally used for separating organisms by using their different specific gravity. It is effective and cheap but time consuming as well as requiring highly skilled personnel. Water turbidity and parasite load in water sample are additional factors affecting to the recovery rate of those 2 methods. We compared the efficiency of IMS and sucrose floatation methods to recover the spiked Cryptosporidium oocysts in various turbidity water samples. Cryptosporidium oocysts concentration at 1, $10^1$, $10^2$, and $10^3$ per $10{\mu}l$ were spiked into 3 sets of 10 ml-water turbidity (5, 50, and 500 NTU). The recovery rate of the 2 methods was not different. Oocyst load at the concentration < $10^2$ per 10 ml yielded unreliable results. Water turbidity at 500 NTU decreased the recovery rate of both techniques. The combination of sucrose floatation and immunofluorescense assay techniques (SF-FA) showed higher recovery rate than IMS and immunofluorescense assay (IMS-FA). We used this SF-FA to detect Cryptosporidium and Giardia from the river water samples and found 9 and 19 out of 30 (30% and 63.3%) positive, respectively. Our results favored sucrose floatation technique enhanced with immunofluorescense assay for detecting contaminated protozoa in water samples in general laboratories and in the real practical setting.

• 한국건축시공학회지
• /
• 제8권2호
• /
• pp.99-106
• /
• 2008

To improve concrete tensile strength and bending strength, New plan that have more economical and simple manufacture process is groped. By an alternative plan, chemical pre-stressed concrete is presented. In this study, we analyzed the rheological properties of cement paste with the kind and replacement ratio of k-type CSA type expansive additives that is used mainly in domestic. and we suggested that the algorithm of a mixing plan in the chemical pre-stressed concrete and from this, we presented the basic report for the right mixing plan. From the results, Flow increased more or less according to use of expansive additives. This phenomenon was observed by increasing paste amount that shows as substitution for expansive additives that specific gravity is smaller than that of cement. As linear regression a result supposing paste that mix expansive additives by Bingham plastic fluid. The shear rate and shear stress expressed high interrelationship. therefore, flow analysis of quantitative was available. The plastic viscosity following to replacement ratio of expansive additives is no change almost, the yield value is decreased in proportion to the added amount of expansive additives. Through this experiment, we could evaluate rheological properties of cement paste using the expansive additives. Hereafter by an additional experiment, we must confirm stability assessment of material separation by using the aggregate with the kind and replacement ratio of expansive additives.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.29-32
• /
• 2005

Recently, for the problem solution of demand and supply imbalance of fine aggregate due to the shortage of natural fine aggregate and the environment regulation on sea sand extraction in the construction field, the studies for the application of recycled fine aggregate using waste concrete are being progressed versatilely. The purpose of this study is to investigate quality of recycled fine aggregate manufactured by drying manufacturing system which is the manufacture method of high duality recycled fine aggregate, and to analyze on thehardened and durability properties of recycled concrete using it. Therefore it is to present the fundamental data for application and utilization of recycled concrete. The results of this study are as follows; Quality of recycled fine aggregate by drying manufacturing system is improved, and compressive strength, carbonation depth and chloride ion penetration depth of recycled concrete using high quality recycled fine aggregate are similar to those of normal concrete using natural and crashed sand. But, resistance to $H_{2}SO_{4}$ show decreased somewhat.

• 한국농공학회지
• /
• 제17권1호
• /
• pp.3655-3665
• /
• 1975

This study was intended to develop a method for measuring the grain separating performance of threshers. The grain separating apparatus used for the experiment was designed and constructed, the function of which was to separate pneumatically mature and immature grain, chaff, straw, dust, and other impurities from the products of threshing. The apparatus has five material outlets where grains and impurities are fallen down by separation depending upon the specific gravity of the material white it moves above the outlets. The principle of design was to separate the mixture of mature grain, immature grain and chaff as distinct as possible, and to induce the mature grains onto the first outlet, the immature grains onto the second and the third, and the straw wastes onto the forth and the fifth outlets. The developed apparatus was tested to evaluate its separating performance with two rice varieties (Tongil and Mine-hikari) at different moisture levels and air velocities. The optimum conditions for operating the apparatus were found from experiment. The results are summarized as follows; 1. The degrees of separation, especially the amount of immature grain contained in the mature paddy, were dependent upon air speed delivered. The optimum air velocities for this apparatus for each levels of grain moisture contents were found from a series of experiments as follows; 14.7-15.3m/sec. for grain of 16 percent moisture content in wet basis, 15.3-16.0m/sec. for 20 percent, and 16.0-16.4m/sec for 24 percent. 2. Composition ratios determined based on the brine separating method was fairly well acted upon the developed apparatus, indicating its recollecting rate of the mature grains as 97.6 to 99.9 percent. The developed separatus acted similarly upon the two rice varieties which had different composition of immature paddy grain. In other words, the separating performance by the apparatus had a good correlation with the one by the brine separating method. 3. As immature grains were separated out unsatisfactory in these experiments than the brine separating method, further investigation may be needed to improve a separating performance of these materials. But the results obtained suggested a possibility of using the tester to replace the current hand separating method, ther eby enabling more consistent test results and also eliminating nearly all costly hand seperating operations.