• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.376-376
• /
• 2007

In Liquid Crystal Display (LCD) manufacturing, the organic over coat materials over coat materials for insulation layer of color filter with acryl ate was widely used. Therefore, we approach that the organic overcoat material can use to insulation layer for color filter and liquid crystal (LC) alignment layer in this research. The LC aligning capabilities was successful stuided for the first time. The organic overcoat layer and polymer layer was coated by spin-coating. In order to characterize the LC alignment, electric optic and residual DC and atomic force microscopy (AFM) image was used. The good LCD aligning capabilities treated on the organic overcoat thin film surfaces with ion beam exposure of $45^{\circ}$ above ion beam energy density of 1200 eV can be achieved. Also the good LCD alignment capabilities treated polymer on surfaces with ion beam exposure of $45^{\circ}$ above ion beam energy density of 1800 eV can be achieved. Comparing electro-optical characteristics between the Polyimide (PI) and the overcoat, the resultant transmittance of the overcoat considerably matched that of the PI and the residual DC also exhibited similar features with the PI.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.450-450
• /
• 2006

Organic light-emitting diodes (OLED) as pixels for flat panel displays are being actively pursued because of their relatively simple structure, high brightness, and self-emitting nature [1, 2]. The top-emitting diode structure is preferred because of their geometrical advantage allowing high pixel resolution [3]. To enhance the performance of TOLEDs, it is important to deposit transparent top cathode films, such as transparent conducting oxides (TCOs), which have high transparency as well as low resistance. In this work, we report on investigation of the characteristics of an indium tin oxide (ITO) cathode electrode, which was deposited on organic films by using a radio-frequency magnetron sputtering method, for use in top-emitting organic light emitting diodes (TOLED). The cathode electrode composed of a very thin layer of Mg-Ag and an overlaying ITO film. The Mg-Ag reduces the contact resistivity and plasma damage to the underlying organic layer during the ITO sputtering process. Transfer length method (TLM) patterns were defined by the standard shadow mask for measuring specific contact resistances. The spacing between the TLM pads varied from 30 to $75\;{\mu}m$. The electrical properties of ITO as a function of the deposition and annealing conditions were investigated. The surface roughness as a function of the plasma conditions was determined by Atomic Force Microscopes (AFM).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.292.2-292.2
• /
• 2013

Graphene, a two-dimensional graphite material consisting of sp2-hybridized carbons. The properties of graphene such as extremely high carrier mobility, high thermal conductivity, low resistivity, large specific make it a promising materail of divices and material. Typically, poly (methyl methacrylate) (PMMA) is used when graphene transfer to other substrates. To remove PMMA on graphene, people used to dip the graphene into the acetone. However, it is known that the remove of PMMA on the graphene is difficult to completely using the acetone. Therefore, to remove the PMMA on the graphene surface, many research groups have employed various methods such as the thermal treatment, photothermal method, and other solvent. Nevertheless, a part of PMMA still remain on graphene surface. Usually, to observe the residual PMMA on graphene surface, topography of graphene surface scanned by atomic force microscopy is used. However, in that case, we can not distinguish PMMA and other particles. In this study, to confirm the residual PMMA on graphene surface, we employed novel measurement technique which is available to distinguish PMMA and other particles by means of photothermal effect.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.1071-1076
• /
• 2011

본 연구에서는 산업용 다관절 로봇을 이용한 3 차원 곡면가공 방안에 대하여 연구하였다. 가반중량이 큰 산업용 로봇의 경우 반복위치정밀도가 높지 않아 위치오차와 가공 깊이 방향 오차를 발생시키며, 본 연구에서는 레이저 변위센서를 이용하여 이를 보정하는 방법을 제시하였다. 로봇교시포인터의 수를 줄이기 위하여 가공면의 특이점들만을 이용하여 곡면 가공이 가능하도록 로봇 궤적을 생성하는 방안을 연구하였다. 본 연구에서는 실제 산업용 로봇을 이용하여 가공시험을 수행하였다. 회전수, 가공각도, 가공깊이, 가공속도 등의 가공조건을 변경해가며, 표면조도, 실제 가공깊이, 진동 및 소음 발생에 대한 시험을 수행하여 적용 가능한 가공조건을 도출하였다.

• 한국해양공학회지
• /
• 제31권2호
• /
• pp.81-90
• /
• 2017

The 1MW OTEC (Ocean Thermal Energy Conversion) platform was designed for application in equatorial seas. In this study, the OTEC platform was investigated using numerical and experimental methods. An octagon-shaped OTEC platform was investigated using the Ocean Engineering Basin of KRISO. These experiments included various tests of regular waves, irregular waves and irregular waves with current (wave+current). The responses of the platform in regular waves showed good agreement between the numerical and experimental results, including the motion RAO, wave run up, and mean drift force. The peak period of heave and pitch motions were observed around 0.5 rad/s, and the effect of the total reflection was found under short wave conditions. The standard deviation (STD) of the platform motion was checked in irregular waves of equatorial and Hawaiian seas. The STD of the pitch was less than $4^{\circ}$ different from the operability requirement under equatorial conditions and the surge STD of the wave frequency showed good agreement between the numerical and experimental results. The STD values of the surge and pitch were increased 66.6% and 92.8% by the current effects in irregular waves, but the pitch STD was less than $4^{\circ}$ under equatorial conditions. This study showed that the STD of the surge was affected by spring effects. Thus, the watch circle of the platform and tension of the mooring lines must be evaluated for a specific design in the future.

• 대한골대사학회지
• /
• 제25권4호
• /
• pp.235-241
• /
• 2018

Background: Procollagen type I N-terminal propeptide (PINP) is one of the most clinically useful bone formation biomarkers. Therefore, the purpose of this study was to independently evaluate the performance of automated total PINP assay and established age- and gender- specific reference intervals for PINP in healthy Korean population. Methods: The imprecision, linearity, and detection capability of Elecsys total PINP assay was determined and reference interval was established using 599 serums from Korean population with normal bone mineral densities based on bone densitometry. Age groups were divided into 20s, 30s, 40s, 50s, 60s and over. Results: Elecsys total PINP had excellent performance in imprecision, linearity, and detection capability. When partitioning age groups in Korean male and female populations, there was significant difference in total PINP between different age groups. In male populations, PINP level was decreased with increasing age, then it remained steady after middle-age. In female populations, there was a decreasing tendency similar to that in the male population with a sharp increase in the 50 to 59 age group. Conclusions: Elecsys total PINP assay showed precise and reliable performance in our study. We established age-related PINP reference intervals for Korean male and female population with normal bone mineral densities.

• Physical Therapy Rehabilitation Science
• /
• 제8권3호
• /
• pp.125-133
• /
• 2019

Objective: To compare the postural control between non-specific chronic low back pain (NSCLBP) subgroups and healthy people during dynamic balance performance using a modified Star Excursion Balance Test (mSEBT). Design: Cross-sectional study. Methods: Eighteen NSCLBP subjects (9 active extension pattern [AEP], 9 flexion pattern [FP]), and 10 healthy controls were enrolled in this study. All subjects performed mSEBT on their dominant leg on a force plate. Normalized reach distance and balance parameters, including the center of pressure (COP) displacement and velocity, were recorded. Results: There were significant differences in mean reach distances in both posterolateral and posteromedial (PM) reach directions between AEP and healthy subjects (p<0.001) and between FP and healthy subjects (p<0.001). However, there were no significant differences among the three groups in the anterior reach direction. Also, the results showed no significant differences in mean COP variables (velocity and displacement) between pooled NSCLBP and healthy subjects. However, the subjects were reclassified into AEP, FP and healthy groups and the results showed a significant difference in mean COP velocity in the PM direction between AEP and FP subjects (p=0.048), and between AEP and healthy subjects (p=0.024). Conclusions: The findings in this study highlight the heterogeneity of the individuals with NSCLBP and the importance of identifying the homogenous subgroups. Individuals with AEP and FP experience deficits in dynamic postural control compared to healthy controls. In addition, the findings of this study support the concept of the Multidimensional Classification System.

• Smart Structures and Systems
• /
• 제23권5호
• /
• pp.449-466
• /
• 2019

Cable-stayed bridges are attractive due to their beauty, reducing material consumption, less harm to the environment and so on, in comparison with other kinds of bridges. As a massive structure with long period and low damping (0.3 to 2%) under many dynamic loads, these bridges are susceptible to fatigue, serviceability disorder, damage or even collapse. Tuned Mass Damper (TMD) is a suitable controlling system to reduce the vibrations and prevent the threats in such bridges. In this paper, Multi Tuned Mass Damper (MTMD) system is added to the Ahvaz cable stayed Bridge in Iran, to reduce its seismic vibrations. First, the bridge is modeled in SAP2000 followed with result verification. Dead and live loads and the moving loads have been assigned to the bridge. Then the finite element model is developed in OpenSees, with the goal of running a nonlinear time-history analysis. Three far-field and three near-field earthquake records are imposed to the model after scaling to the PGA of 0.25 g, 0.4 g, 0.55 g and 0.7 g. Two MTMD systems, passive and active, with the number of TMDs from 1 to 8, are placed in specific points of the main span of bridge, adding a total mass ratio of 1 to 10% to the bridge. The parameters of the TMDs are optimized using Genetic Algorithm (GA). Also, the optimum force for active control is achieved by Fuzzy Logic Control (FLC). The results showed that the maximum displacement of the center of the bridge main span reduced 33% and 48% respectively by adding passive and active MTMD systems. The RMS of displacement reduced 37% and 47%, the velocity 36% and 42% and also the base shear in pylons, 27% and 47%, respectively by adding passive and active systems, in the best cases.

• Safety and Health at Work
• /
• 제10권1호
• /
• pp.3-20
• /
• 2019

This review aimed to identify risk factors for occupational accidents and illnesses among young workers in the Nordic countries and to attain knowledge on specific vulnerable groups within the young working force that may need special attention. We conducted a systematic review from 1994 to 2014 using five online databases. Of the 12,528 retrieved articles, 54 met the review criteria and were quality assessed, in which data were extracted focusing on identifying occupational safety, health risk factors, and vulnerable groups among the young workers. The review shows that mechanical factors such as heavy lifting, psychosocial factors such as low control over work pace, and organizational factors such as safety climate are all associated with increased injury risk for young Nordic workers. Results show that exposures to chemical substances were associated with skin reactions, e.g., hand eczema. Heavy lifting and awkward postures were risk factors for low back pain, and high job demands were risk factors for mental health outcomes. The review identified young unskilled workers including school drop-out workers as particularly vulnerable groups when it comes to occupational accidents. In addition, apprentices and young skilled workers were found to be vulnerable to work-related illnesses. It is essential to avoid stereotyping young Nordic workers into one group using only age as a factor, as young workers are a heterogeneous group and their vulnerabilities to occupational safety and health risks are contextual. Politicians, researchers, and practitioners should account for this complexity in the education, training and organization of work, and workplace health and safety culture.

• 한국시뮬레이션학회논문지
• /
• 제28권1호
• /
• pp.23-39
• /
• 2019

군 병력 감축, 인명중시 사상의 확산 그리고 4차 산업혁명을 통한 혁신 기술의 국방에서의 활용과 같은 시대적 요구 속에 드론-봇의 적극적인 활용이 요구되고 있다. 특히, 드론을 활용한 감시 및 정찰은 미래 전장에서 큰 역할을 할 것으로 예상된다. 하지만 정찰용 드론의 운용 개념, 특히 적을 찾기 위한 드론의 탐색 경로에 대한 연구는 많이 이루어지지 않았다. 본 연구에서는 정찰 목적용 드론의 효과적인 운용을 위한 탐색 방법을 시뮬레이션 분석을 통해 제안한다. 시뮬레이션에서 드론과 적은 연속공간에서 선형(First-Order)으로 움직이며, 적은 불확실성을 반영하여 랜덤워크 기법을 적용하였다. 연구는 먼저 기존에 군에서 주요하게 활용하던 탐색 방법(Parallel, Spiral)이 실제로 목표를 탐지하는 확률을 제시하며, 이어서 탐지자의 탐색반경과 속도가 탐지 확률에 미치는 영향을 분석한다. 마지막으로, 적이 랜덤하게 이동하지 않고 특정한 목표를 가지고 이동할 때 적용할 수 있는 새로운 탐지방법인 PS(Probability Search), PCS((Probability Circle Search), HS(Hamiltonian Search), HCS(Hamiltonian Circle Search) 방법을 소개하고 이에 대한 실험결과를 제시한다. 본 연구에서 제시한 탐색방법은 드론의 정찰 작전 시 활용도가 클 것으로 기대한다.