• Fire Science and Engineering
• /
• v.27 no.1
• /
• pp.39-45
• /
• 2013

This study analyzes the explosion hazard of dry cleaning solvent recovery machine in laundry shop in two aspects, i.e. combustible and ignition source, and determines the explosive conditions of this machine by conducting mockup explosion tests repeatedly, varying conditions and using real dry cleaning solvent recovery machines. As to combustibles, two kinds of combustibles used widely in Korea have been selected and tested. The flash points, LEL's, and saturation vapor pressures of those combustibles have been measured, and their explosion specific curves have been drawn, based on the results of the measurements, so that the explosion risks of those materials may be determined, depending on the temperatures. Potential voltages generated from materials for laundry and foreign materials of metals have been assumed to be the ignition sources in this application, and their potential voltages have been measured, depending on temperature, humidity, and antistatic agent, by using real materials for laundry and a potential voltage measuring device. Tests have been conducted, varying the quantities, concentrations, and operating temperatures of materials for laundry. As a result, explosions have not been generated with potential voltages of materials for laundry, but explosions have been observed when applying artificial spark energy of 2.0 mJ.

• The Journal of the Korea Contents Association
• /
• v.17 no.6
• /
• pp.643-649
• /
• 2017

This research is to compare factors which influence to mobilize police force necessary for crowd gathering occasions, and the purpose of this research is to prepare scientific basis for mobilization of police force by understanding order of priority of obstructive factors to mobilize police force for progressing safe crowd gathering occasions. Crowd gathering occasion has a characteristic that minor cause can lead to huge damage because many people concentrically gather at a specific place. In order to control these risks, it is necessary to analyze criteria on order of priority which can arouse risk to mobilize police force. In this research, I classified the factors influencing safety of crowd gathering occasion as internal risk factor, external risk factor and traffic safety threatening and set up the level of private security manpower and participants mobilized to crowd gathering occasion as independent variable and set up mobilized police force from 2013 to 2014 as dependent variable and analyzed it hierarchical analysis. From the result of analysis, the biggest influence to mobilization of police force for crown gathering occasion was the number of participants, and next self order-keeping agents and reason of mobilizing police force. Based on the result of analysis that the biggest factor to mobilize police force to crowd gathering occasion is the number of participants, it can be resulted that the number of participants influence to the risk of crowd gathering occasion.

• Journal of The Korean Association For Science Education
• /
• v.30 no.4
• /
• pp.472-486
• /
• 2010

The surveys for public awareness in relation to socio-scientific issues (SSI) have been limited to several topics such as public perception of risks about the issues and preference for some policies. To illuminate the public science culture literacy about SSI from a holistic perspective, this study aimed to develop an indicator system. For this purpose, the issue on climate change, which is currently one of the biggest issues worldwide, was adopted as a specific SSI and the framework centering on climate change was developed. Science culture literacy about SSI was defined as a lifestyle to identify SSI from various viewpoints and to cope with problems related to SSI appropriately. In the framework proposed, individual science culture indicators are divided into Potential and Activity area. The Potential consists of categories of Interest, Opinion and Understanding, whereas the Activity is composed of categories of Learning and Practice. To examine the reliability and validity of this framework statistically, the developed questionnaire was reviewed by science educators, environment experts and atmospheric scientists and was used to asked 777 secondary students. Based on the results of statistical analyses, the framework was modified and it consequently had 2 areas, 5 categories, 15 sub-categories, 34 indicators and 63 items. It is expected that the framework of science culture indicators for SSI could be used as a measurement tool for public awareness about various SSI topics.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.5
• /
• pp.428-433
• /
• 2004

Sinus floor augmentation has been proven an effective treatment procedure to increase bone volume in the posterior edentulous maxilla. Autogenous bone considered to be the best material for reconstructive bone surgery and has been successfully used as a graft material to augment posterior maxilla. However, the collection of autogenous bone required extra risks for morbidity and complaints. So, various bone graft materials included ${\beta}$-tricalcium phosphate(${\beta}$-TCP) has been introduced for replacing the autogenous bone. The objective of this clinical study was to determine the predictability of endosseous implant placed in a maxillary sinus with ${\beta}$-TCP grafting. We performed sinus elevation with ${\beta}$-TCP to install the implant in the 10 maxillary cases. The prosthetic procedure was performed 6-9 months after. The implant-prosthetics was checked about 1 year. We checked the implant and measured the maximum bite force to evaluate the function of the implant. There was not observed the specific problem and complication in dental implant and maxillary sinus in the grafted materials. The maximum bite force was 558N in case of natural tooth, 365N in implant without grafting, 318N in implant with ${\beta}$-TCP grafting. There was no significant difference between with and without sinus grafting on maximum bite force(p>0.05). As though the long term check-up is needed, the grafting of ${\beta}$-TCP as a osteoconductive materials can expand the volume and induce dense new bone formation in maxillary sinus. So, this short-term results support that ${\beta}$-TCP can be a suitable material for sinus augmentation.

• Journal of the Korean Society of Safety
• /
• v.31 no.5
• /
• pp.22-27
• /
• 2016

The Electrostatic Charge Prevention Technology is a core factor that highly influences the yield of Ultra High Resolution Flat Panel Display and high-integrated semiconductor manufacturing processes. The corona or x-ray ionizations are commonly used in order to eliminate static charges during manufacturing processes. To develop such a revolutionary x-ray ionizer that is free of x-ray radiation and has function to control the volume of ion formation simultaneously is a goal of this research and it absolutely overcomes the current risks of x-ray ionization. Under the International Commission on Radiological Protection, it must have a leakage radiation level that should be lower than a recommended level that is $1{\mu}Sv/hour$. In this research, the new generation of x-ray ionizer can easily control both the volume of ion formation and the leakage radiation level at the same time. In the research, the test constraints were set and the descriptions are as below; First, In order not to leak x-ray radiation while testing, the shielding box was fully installed around the test equipment area. Second, Implement the metallic Ring Electrode along a tube window and applied zero to ${\pm}8kV$ with respect to manage the positive and negative ions formation. Lastly, the ion duty ratio was able to be controlled in different test set-ups along with a free x-ray leakage through the metallic Ring Electrode. In the result of experiment, the maximum x-ray radiation leakage was $0.2{\mu}Sv/h$. These outcome is lower than the ICRP 103 recommended value, which is $1{\mu}Sv/h$. When applying voltage to the metallic ring electrode, the positive decay time was 2.18s at the distance of 300 mm and its slope was 0.272. In addition, the negative decay time was 2.1s at the distance of 300 mm and its slope was 0.262. At the distance of 200 mm, the positive decay time was 2.29s and its slope was 0.286. The negative decay time was 2.35s and its slope was 0.293. At the distance of 100 mm, the positive decay time was 2.71s and its slope was 0.338. The negative decay time was 3.07s and its slope was 0.383. According to these research, the observation was shown that these new concept of ionizer is able to minimize the leakage radiation level and to control the positive and negative ion duty ratio while ionization.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.199-207
• /
• 2015

In ports of Korea, the marine traffic flow is congested due to a large number of vessels coming in and going out. In order to improve the safety and efficiency of these vessels, South Korea is operating with a Vessel Traffic Service System, which is monitoring its waters for 24 hours. However despite these efforts of the VTS (Vessel Traffic Service) officers, collisions are occurring continuously, the risk situation is analyzed that occurs once in about 20 minutes, the risk may be greater. It investigated to reduce these accidents by providing a safety standard for collision danger in a timely manner. Thus, this study has developed a risk prediction module to predict risk in advance. This module can avoid collision risk to adjust the speed and course of ship using a risk evaluation model based on ship operator's risk perspective. Using this module, the ship operators and VTS officers can easily be identified risks in complex traffic situations, so they can take an appropriate action against danger in near future including course and speed change. To verify the effectiveness of this module, this paper predicted the risk of each encounter situation and confirmed to be capable of identifying a risk changes in specific course and speed changes at Busan coastal water.

• Parasites, Hosts and Diseases
• /
• v.55 no.2
• /
• pp.167-174
• /
• 2017

China still has more than 30,000 patients of advanced schistosomiasis while new cases being reported consistently. D-dimer is a fibrin degradation product. As ascites being the dominating symptom in advanced schistosomiasis, the present study aimed to explore a prediction model of ascites with D-dimer and other clinical easy-achievable indicators. A case-control study nested in a prospective cohort was conducted in schistosomiasis-endemic area of southern China. A total of 291 patients of advanced schistosomiasis were first investigated in 2013 and further followed in 2014. Information on clinical history, physical examination, and abdominal ultrasonography, including the symptom of ascites was repeatedly collected. Result showed 44 patients having ascites. Most of the patients' ascites were confined in the kidney area with median area of $20mm^2$. The level of plasma D-dimer and pertinent liver function indicators were measured at the initial investigation in 2013. Compared with those without ascites, cases with ascites had significantly higher levels of D-dimer ($0.71{\pm}2.44{\mu}g/L$ vs $0.48{\pm}2.12{\mu}g/L$, P=0.005), as well ALB (44.5 vs 46.2, g/L) and Type IV collagen (50.04 vs $44.50{\mu}g/L$). Receiver operating characteristic curve analyses indicated a moderate predictive value of D-dimer by its own area under curve (AUC) of 0.64 (95% CI: 0.54-0.73) and the cutoff value as $0.81{\mu}g/L$. Dichotomized by the cutoff level, D-dimer along with other categorical variables generated a prediction model with AUC of 0.76 (95% CI: 0.68-0.89). Risks of patients with specific characteristics in the prediction model were summarized. Our study suggests that the plasma D-dimer level is a reliable predictor for incident ascites in advanced schistosomiasis japonica patients.

• Journal of Korea Water Resources Association
• /
• v.51 no.8
• /
• pp.629-642
• /
• 2018

Future variability of the spatial patterns of rainfall events is the point of water-related risks and impacts of climate change. Recent related researches are mostly conducted based on the outcomes from General Circulation Models (GCMs), especially Coupled Model Intercomparison Project, phase 5 (CMIP5) GCMs which are the most advanced version of climate modeling system. GCM data have been widely used for various studies as the data utility keep getting improved. Meanwhile the model performances especially for raw GCM outputs are rarely evaluated prior to the applications although the process would essential for reasonable use of model forecasts. This study attempt to quantitatively evaluate the skills of 29 CMIP5 GCMs in reproducing spatial climatologies of precipitation in East Asia. We used 3 different gridded observational data as the references available over the study area and calculated correlation and errors of spatial patterns simulated by GCMs. As a result, the study presented diversity of the GCM evaluation in the performance, rank, or accuracy by different configurations, such as target area, evaluation method, and observation data. Yet, we found that Hadley-centre affiliated models comparatively performs better for the meso-scale area in East Asia and MPI_ESM_MR and CMCC family showed better performance specifically for the korean peninsula. We expect that the results and thoughts of this study would be considered in screening suitable GCMs for specific area, and finally contribute to extensive utilization of the results from climate change related researches.

• Journal of Korea Port Economic Association
• /
• v.26 no.3
• /
• pp.92-113
• /
• 2010

The purpose of this study aims to analyse the implied terms of safe berth under Voyage charterparty with the Rebon case. Where the safety of the berth is warranted, but not the safety of the port, then the charterer's obligation is to nominate a berth which can be approached safely from within the port and which was itself, save insofar as affected by hazards or risks which affect the port as a whole or all of the berths within it. This case is an appeal from an order made by the judge dismissing an appeal from a final declaratory award on preliminary issues made by arbitrators. The judge expressed the question for decision somewhat differently as follows: if a specific load port is named in a voyage charterparty and there are several possible berths within that port to which a vessel could be directed to load by the charterers and there is no express warranty in the charterparty of the safety of either the port or the berth to which the vessel is to be directed by the charterers, is the charterparty subject to an implied term that the charterers must nominate a safe berth at that load port?

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.1
• /
• pp.3-11
• /
• 2013

As construction projects became larger and longer, the need for the construction technologies and innovative construction processes has been continuously increased in construction field. In response to this trend, construction industries tried to adopt the concurrent engineering which had been normally applied for manufacturing industries to develop the products with improved quality in a reduced time. However, the application of the concurrent engineering to construction field was limited due to the lack of advanced management system and incomplete theoretical backgrounds. In this regard, this study attempted to develop a checklist for the successful application of concurrent engineering to bridge projects. To this end, this study presents the checklist for the application of concurrent engineering to construction projects. Further, the checklist was modified and updated to reflect the specific feature of the bridge construction using expert interviews. With the help of additional 188 experts, a questionnaire-based survey was also conducted to validate the checklist. In addition, using importance-performance analysis(IPA), the study identified the factors needed for intensive improvement. Consequently, the proposed checklist is expected to be useful, because it improves the applicability of the concurrent engineering in that it enables managers to monitor construction progress and further to protect the project from potential risks.