• Journal of Microbiology and Biotechnology
• /
• v.20 no.11
• /
• pp.1555-1562
• /
• 2010

Development of the strain and the fermentation process of Hansenula polymorpha was implemented for the production of ${\gamma}$-linolenic acid ($GLA,\;C18:3{\Delta}^{6,9,12}$), an n-6 polyunsaturated fatty acid (PUFA) that has been reported to possess a number of health benefits. The mutated ${\Delta}^6$-desaturase (S213A) gene of Mucor rouxii was expressed in H. polymorpha under the control of the methanol oxidase (MOX) promoter. Without the utilization of methanol, a high-cell-density culture of the yeast recombinant carrying the ${\Delta}^6$-desaturase gene was then achieved by fed-batch fermentation under glycerol-limited conditions. As a result, high levels of the ${\Delta}^6$-desaturated products, octadecadienoic acid ($C18:2{\Delta}^{6,9}$), GLA, and stearidonic acid ($C18:4{\Delta}^{6,9,12,15}$), were accumulated under the derepression conditions. The GLA production was also optimized by adjusting the specific growth rate. The results show that the specific growth rate affected both the lipid content and the fatty acid composition of the GLA-producing recombinant. Among the various specific growth rates tested, the highest GLA concentration of 697 mg/l was obtained in the culture with a specific growth rate of 0.08 /h. Interestingly, the fatty acid profile of the yeast recombinant bearing the Mucor ${\Delta}^6$-desaturase gene was similar to that of blackcurrant oil, with both containing similar proportions of n-3 and n-6 essential fatty acids.

• Korean Journal of Microbiology
• /
• v.25 no.4
• /
• pp.353-359
• /
• 1987

The aim of the present study was to investigate the effects of growth rate on the biosynthesis of tylosin in Streptomyces fradiae. In order to elucidate the relation between the growth rate and the tylosin formation rate, the activities of enzymes involved in oxaloacetate metabolism were determined using cells grown at different growth rates in chemostats. As the results, it was found that the specific rate of tylosin formation($q_{p}$) was closely related to the specific cell growth rate and the maximum value of $q_{p}$ was 1.1mg tylosin, $q_{p}$ cell, $0.013h^{-1}$ at the growth rate $0.013h^{-1}$. However further increase in the growth rate over $0.013h^{-1}$ resulted in apparent decrease of $1_{p}$. The synthesis and activities of citrate synthase, aspartate aminotransferase, and PEP carboxylase were very low at lower growth rate. On the other hand, the activity and synthesis of methylmalonyl-CoA carboxyltransferase was closely related to tylosin formation. Therefore it was concluded that tylosin formation was apparently controlled by the growth rate.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.2
• /
• pp.1-14
• /
• 2022

The implications of bank-specific risks and macroeconomic risks on the growth, profitability, and stability of Islamic and conventional banks are examined and compared in this article. The study also investigates whether corporate governance mitigates the effects of both bank-specific and macroeconomic risks on Islamic and conventional banks' development, profitability, and stability. For the period 2007-2019, we examined a panel data set of 22 banks in Pakistan, including both Islamic and conventional banks. We discovered considerable evidence that both bank-specific risks and macroeconomic risks have negative effects on the growth, profitability, and stability of Pakistani banks using a dynamic panel data estimator, the two-step Generalized Method of Moments (GMM) approach. Furthermore, the findings show that bank-specific and macroeconomic risks have different consequences in both types of banking. The impacts of liquidity risk, operational risk, capital risk, inflation risk, and exchange rate risk are higher for Islamic banks than for conventional banks. Conventional banks, on the other hand, are more vulnerable to credit risk and interest rate risk. Finally, the findings show that good corporate governance reduces the negative consequences of both categories of risks on bank development, profitability, and stability. This is true for Islamic and conventional banks alike.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.2
• /
• pp.91-95
• /
• 2009

To understand the effect of attachment substrate on the growth of benthic microalgae, we experimentally investigated the growth of benthic microalgae Nitzschia sp. (Jinhae Bay strain) with additions of glass beads in different sizes. The glass beads used in this study are 0.09-0.15 mm (G1), 0.25-0.50 mm (G2), 0.75-1.00 mm (G3) and 1.25-1.65 mm (G4). No addition of glass beads used as controls. Highest specific growth rate (0.37/day) and maximum cell density ($9,232{\pm}840$ cells/mL) of Nitzschia sp. showed at the smallest glass beads (G1), and the specific growth rate and maximum cell density were decreasing with increasing size of glass beads (specific growth rate and maximum cell density of G4 was 0.24/day and $6,397{\pm}524$ cells/mL, respectively). Moreover, specific growth rate of the control experiment (0.23/day) was significantly lower than their of G1 to G3 experiment. The results indicated that the attachment substrate for benthic microalgae as Nitzschia sp. is important factor which affecting the growth rate as well as cell density. Therefore, the physiological experiment of benthic microalgae seems to be necessary to preliminary experiment, which is addition or not of the attachment suitable substrate and the grain size for the target species of benthic microalgae.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.1
• /
• pp.27-31
• /
• 2000

Characteristics of ethanol production by a xylose-fermenting yeast, Pichia stipitis Y-7124, were studied. The sugar consumption rate and specific growth rate were higher in the glucose-containing medium than in the xylose-containing medium. Specific activities of xylose reductase and xylitol dehydrogenase were higher in the medium with xylose than glucose, suggesting their induction by xylose. Maximum specific growth rate and ethanol yield were achieved at 30 g xylose/L concentration without formation of by-products such as xylitol and acetic acid whereas a maximum ethanol concentration was obtained at 130 g/L xylose. Adding a respiratory inhibitor, rotenone, increased a maximum ethanol concentration by $10\%$ compared with the control experiment. In order to evaluate the pattern of ethanol inhibition on specific growth rate, a kinetic model based on Luong's equations was applied. The relationship between ethanol concentration and specific growth rate was hyperbolic for glucose and parabolic for xylose. A maximum ethanol concentration at which cells did not grow was 33.6 g/L for glucose and 44.7 g/L for xylose.

• Microbiology and Biotechnology Letters
• /
• v.28 no.5
• /
• pp.298-302
• /
• 2000

Fermentation parameters were estimated by use of a vent gas analyzer coupled to a computer data acquisition system in cultivation of Phellinus linteus WI-001, pro-ducer of polysaccharides known to have potent anticancer activities. Oxygen uptake rate(OUR), a critical indicator of the cells activities, was calculated by applying oxygen mass balance. In addition, by dividing the oxygen uptake rate hy the total oxygen consumed, on-line estimation of the cells specific growth rate was successfully done. It was also possible to estimate cell concentration directly bt use of oxygen-cell yield($Y_{x/o}$ ) which was obtained based on a correlation between cell growth and total oxygen consumed.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.18-25
• /
• 2002

Research to discuss the fire performance of materials requires tools for measuring their burning characteristics and validated fire growth models to predict fire behavior of the materials under specific tire scenarios using the measured properties as input for the models. In this study, burning characteristics such as time to ignition, weight loss rate, flame spread, heat release rate, total heat evolved, and effective heat of combustion for four types of wood-based materials were evaluated using the cone calorimeter and inclined panel tests. Time to ignition was affected by not only surface condition and specific gravity of the tested materials but also the type and magnitude of heat source. Results of weight loss rate, measured by inclined panel tests, indicated that heat transfer from the contacted flame used as the heat source into the inner part of the specimen was inversely proportional to specific gravity of material. Flame spread was closely related with ignition time at the near part of burning zone. Under constant and severe external heat flux, there was little difference in weight loss rate and total heat evolved between four types of wood-based panels. More applied heat flux caused by longer ignition time induced a higher first peak value of heat release rate. Burning characteristics data measured in this study can be used effectively as input for fire growth models to predict the fire behavior of materials under specific fire scenarios.

• Microbiology and Biotechnology Letters
• /
• v.25 no.3
• /
• pp.235-239
• /
• 1997

Chlorococcum littorale has been grown in high $CO_2$ concentrations to utilize $CO_2$ gas in the polluted air. The effect of incident light intensity on the specific growth rate is expressed by a photoinhibition model, showing half- saturation constant, $K_0\;as\;8\;(W/m^2)$ and inhibition constant, Ki as 35 $(W/m^2)$. The maximum specific growth rate was also estimated as 0.095 (1/day) under this condition. This strain maintained the optimum growth rate in 20% of $CO_2$ gas but 50% of input $CO_2$ gas is the maximum concentration considering the economical efficiency. The maximum Specific $CO_2$ consumption rate, $qCO_2$ was measured as 17.48 (mg $CO_2/g$ dry wt./day) in batch cultivation, 11.2 (mg $CO_2/g$ dry wt./day) in fed-batch cultivation and 10.87 (mg $CO_2/g$ dry wt./day) at 0.065 (1/day) of dilution rate in continuous cultivation. The chemical composition of the biomass obtained from this process showed 32.5% of protein, 27.5% of lipid, 16.5% of carbohydrate and ash 11.7%.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.6
• /
• pp.652-658
• /
• 2011

The growth kinetics of Streptomyces noursei NRRL 5126 was investigated under different aeration and agitation combinations in a 5.0 l stirred tank fermenter. Poly-${\varepsilon}$-lysine biosynthesis, cell mass formation, and glycerol utilization rates were affected markedly by both aeration and agitation. An agitation speed of 300 rpm and aeration rate at 2.0 vvm supported better yields of 1,622.81 mg/l with highest specific productivity of 15 mg/l.h. Fermentation kinetics performed under different aeration and agitation conditions showed poly- ${\varepsilon}$-lysine fermentation to be a growth-associated production. A constant DO at 40% in the growth phase and 20% in the production phase increased the poly-${\varepsilon}$-lysine yield as well as cell mass to their maximum values of 1,992.35 mg/l and 20.73 g/l, respectively. The oxygen transfer rate (OTR), oxygen utilization rate (OUR), and specific oxygen uptake rates ($qO_2$) in the fermentation broth increased in the growth phase and remained unchanged in the stationary phase.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.5
• /
• pp.918-925
• /
• 2008

Controlling the light energy and major nutrients is important for high cell density culture of cyanobacterial cells. The growth phase of Anabaena variabilis can be divided into an exponential growth phase and a deceleration phase. In this study, the cell growth in the deceleration phase showed a linear growth pattern. Both the period of the exponential growth phase and the average cell growth rate in the deceleration phase increased by controlling the light intensity. To control the light intensity, the specific irradiation rate was maintained above $10\;{\mu}mol/s/g$ dry cell by increasing the incident light intensity stepwise. The final cell density increased by controlling the nutrient supply. For the control of the nutrient supply, nitrate, phosphate, and sulfate were intermittently added based on the growth yield, along with the combined control of light intensity and nutrient concentration. Under these control conditions, both final cell concentration and cell productivity increased, to 8.2 g/l and 1.9 g/l/day, respectively.