• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.209-217
• /
• 2022

Lane management with a central variable lane(s) (or reversible lane) where the traffic flow is temporarily reversed in one or more lanes during peak periods has been evaluated as an effective strategy to alleviate congestion caused by tidal traffic flows. However, due to traffic safety issues, such a movable barrier system can be considered as an alternative to supplement the existing its operation facilities such as static and/or dynamic signs and special pavement markings. In addition, when combined with a bus exclusive lane strategy, its effectiveness could be greatly increased. The objective of this study is to propose a feasibility analysis procedure for operational strategies of a bus-exclusive lanes using a barrier transfer system (BTS) for urban expressways. To this end, a case study was conducted on two urban expressways on the west side of the Han River in Seoul. As a result, temporary operation during rush hour in the morning was found to be most effective. The results presented in this study are expected to serve as a basis for establishing bus-exclusive lane operation strategies using similar systems in the future.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.6
• /
• pp.155-166
• /
• 1997

In this study, a simulation tool is developed in order to investigate non steady-state cornering performance of 6WD/6WS special-purpose vehicles. 6WD vehicles are believed to have good performance on off-the-road maneuvering and to have fail-safe capabilities. But the cornering performances of 6WS vehicles are not well understood in the related literature. In this paper, 6WD/6WS vehicles are modeled as a 18 DOF system which includes non-linear vehicle dynamics, tire models, and kinematic effects. Then the vehicle model is constructed into a simulation tool using the MATLAB /SIMULINK so that input/output and vehicle parameters can be changed easily with the modulated approach. Cornering performance of the 6WS vehicle is analyzed for brake steering and pivoting, respectively. Simulation results show that cornering performance depends on the middle-wheel steering as well as front/rear wheel steering. In addition, a new 6WS control law is proposed in order to minimize the sideslip angle. Lane change simulation results demonstrate the advantage of 6WS vehicles with the proposed control law.

• Structural Engineering and Mechanics
• /
• v.35 no.1
• /
• pp.37-52
• /
• 2010

Special-shape arch bridge for self-balance (SBSSAB) in Zhongshan City is a kind of new fashioned spatial combined arch bridge composed of inclined steel arch ribs, curved steel box girder and inclined suspenders, and the mechanical behavior of the SBSSAB is particularly complicated. The SBSSAB is aesthetic in appearance, and design of the SBSSAB is artful and particular. In order to roundly investigate the mechanical behavior of the SBSSAB, 3-D finite element models for spatial member and shell were established to analyze the mechanical properties of the SBSSAB using ANSYS. Finite element analyses were conducted under several main loading cases, moreover deformation and strain values for control section of the SBSSAB under several main loading cases were proposed. To ensure the safety and rationality for optimal design of the SBSSAB and also to verify the reliability of its design and calculation theories, the 1/10 scale model tests were carried out. The measured results include the load checking calculation, lane loading and crowd load, and dead load. A good agreement is achieved between the experimental and analytical results. Both experimental and analytical results have shown that the SBSSAB is in the elastic state under the planned test loads, which indicates that the SBSSAB has an adequate load-capacity. The calibrated finite-element model that reflects the as-built conditions can be used as a baseline for health monitoring and future maintenance of the SBSSAB.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.845-856
• /
• 2020

This study proposes a bridge evaluation system for indivisible permit vehicles such as hydraulic cranes. The permit loads for the bridge evaluation are divided into three categories: routine permit loads, special permit 1 loads, and special permit 2 loads. Routine permit and special permit 1 vehicles are allowed to cross a bridge with normal traffic. For these two permits, the standard lane model in the Korean Highway Bridge Design Code was adopted to consider normal traffic in the same lane. Special permit 2 vehicles are assumed to cross a bridge without other traffic. Structural analyses of two prestressed-beam bridges and two steel box girder bridges were conducted for the proposed permit loads. The rating factors of the four bridges for all permit loads were calculated as sufficiently large values for the moment and shear force so that crossing the bridges can be permitted. A reliability assessment of the bridges was performed to identify the reliability levels for the permit vehicles. It was confirmed that the reliability level of the minimum required strength obtained by the load-resistance factors yields the target reliability index of the design code for the permit vehicles.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.1-11
• /
• 2008

As bus is realized by economical, environmental transportation that is available mass transport than car, various policy for improvement of services is achieved. As innovative public transportation systems like BMS (Bus Management System) have established, it is possible to manage bus service efficiently. However, the present bus service management system mainly focuses on enhancing service reliability represented by schedule adherence index. This study discusses the necessity of a special management for bus bunching phenomena at stops, and develops two kinds of bus bunching indices based on the Number of Berth and the Average Bus Arrival Rate. The bus bunching indices were measured by utilizing the bus operational information from BMS at the Seoul TOPIS(Transportation & Information Service). In order to evaluate the sensitivity of the Indices, the indices were applied to two different bus groups: buses on exclusive bus median lane, and regular (shared) lanes. As analysis result, is bunching as is near in downtown and is bunching to peak time morning than the afternoon. Compared with the schedule adherence index, the suggested indices were proved as an efficient complementary indices in the evaluation of the bus operational performance. The results of index comparison between exclusive bus median lane and shared lanes can promote the expansion of exclusive bus median lane. Moreover, it can also be used as a reference in deciding bus station scale including the Number of Berth and the route adjustment plan.

• Journal of the korean society of oceanography
• /
• v.37 no.3
• /
• pp.144-153
• /
• 2002

This is a review paper, assessing progress reported in a Special Issue (Prandle and Lane, 2000) of Coastal Engineering focusing on simulation of SPM in the North Sea, against issues over a diverse range of shelf seas and their coastal margins. The broad objectives of reproducing the characteristics of sediment fluxes off an open coast and relating these to tidal and wave forcing were achieved. However, accurate computation of these fluxes remains sensitive to largely empirical coefficients used in determining erosion and deposition rates. Bed roughness strongly influences both these coefficients and the associated near-bed current magnitudes (including wave impact thereon). Bed roughness can change significantly over a tidal cycle and dramatically over seasons or in the course of a major event. Accurate simulation of sediment fluxes on a day-to-day basis is constrained by dependency on the initial distribution of mobile sediments. The latter depends on rates and locations of original sources and the time history of preceding events. Remote sensing via aircraft could provide data for assimilation into such models to circumvent these constraints. The approaches described here can be readily applied to other coastal regions to indicate the likely distributions and pathways of known sediment sources. However quantitative simulations will require an associated observational programme. A subsequent stage is to understand the evolving balance between the forecasted sediment movement - the resulting morphological adjustments and thence modifications to the prevailing tidal current and wave regimes.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.7
• /
• pp.498-506
• /
• 2003

A computer vision system applied to an intelligent safety vehicle has been required to be worked on a small sized real time special purposed hardware not on a general purposed computer. In addition, the system should have a high reliability even under the adverse road traffic environment. This paper presents a design and an implementation of an onboard hardware system taking into account for high speed image processing to analyze a road traffic scene. The system is mainly composed of two parts: an early processing module of FPGA and a postprocessing module of DSP. The early processing module is designed to extract several image primitives such as the intensity of a gray level image and edge attributes in a real-time Especially, the module is optimized for the Sobel edge operation. The postprocessing module of DSP utilizes the image features from the early processing module for making image understanding or image analysis of a road traffic scene. The performance of the proposed system is evaluated by an experiment of a lane-related information extraction. The experiment shows the successful results of image processing speed of twenty-five frames of 320$\times$240 pixels per second.

• Journal of Korean Society of Transportation
• /
• v.30 no.4
• /
• pp.21-32
• /
• 2012

Exclusive bus lane (EBL) is typically located in the roadway median, and is accessed by weaving across the GPLs(general purpose lanes) before entering from the left lane of the GPLs. To maximize the potential for successful EBL operations, a critical design issue that requires special attention is the length of bus weaving section before entering EBL. The process of developing guidelines for the length of bus weaving section can be supported by a sensitivity analysis of performance measure (safety) with respect to the bus weaving distance. However, field data are difficult to obtain due to inherent complexity in creating performance measure (safety) samples under various interesting flows and bus weaving distance that are keys to research success. In this paper, VISSIM simulation is applied to simulate the operation of roadway weaving areas with EBL, and based on vehicle trajectory data from microscopic traffic simulation models, the Surrogate Safety Assessment Model (SSAM) computes the number of surrogate conflicts (or degree of safety) with respect to the bus weaving distance. Then, a multiple linear regression (MLR) model using safety data (number of surrogate conflicts) is developed. Finally, guidelines for bus weaving distance are established based on the developed MLR. Developed guidelines explicitly indicate that a longer bus weaving distance is required to maintain desired safety as weaving volume increases.

• Journal of Korean Society of Rural Planning
• /
• v.16 no.3
• /
• pp.103-115
• /
• 2010

This study was accompanied to develop the management and application plans as resources for rural tourism through the analysis of distribution characteristics, inhabitants' practical use, need item for management and application, and aesthetic/recreation function of Palustrine wetland in rural area. The 2.3 Palustrine wetland per farm village were located, and 77.5% of total wetland was used by agricultural water, landscape, rural tourism The management and water quality were steadily getting better in used wetland than in unused wetland. Also, 91.8% of respondents answered that there is a practical use plan afterward, and much preferred the mode of ecotourism through restoration of ecological wetland. As the results from the appropriateness evaluation of management and application in used wetland for ecotourism, improvement item was required in observation deck, entrance lane, guidance facilities etc. And, insufficient result was deduced in appropriateness of operation program and special learning course, and in participation of inhabitants and experts. The result of evaluation of the aesthetic and recreation functions generally appeared high, but the need improvement item was required in artificial water wall and plantation base that deteriorate biological diversity. These results will be used to data for conservation, management and practical use of wetland, an important natural resource in farm village, which are confronted in crisis of land reclamation by use reduction of use and false management.

• Journal of the Korea Convergence Society
• /
• v.3 no.4
• /
• pp.35-44
• /
• 2012

In this study, a simulation program is developed in order to investigate non steady-state cornering performance of 6WD/6WS special-purpose vehicles. 6WD vehicles are believed to have good performance on off-the-road maneuvering and to have fail-safe capabilities. But the cornering performances of 6WS vehicles are not well understood in the related literature. In this paper, 6WD/6WS vehicles are modeled as a 18 DOF system which includes non-linear vehicle dynamics, tire models, and kinematic effects. Then the vehicle model is constructed into a simulation program using the MATLAB/SIMULINK so that input/output and vehicle parameters can be changed easily with the modulated approach. Cornering performance of the 6WS vehicle is analyzed for brake steering and pivoting, respectively. Simulation results show that cornering performance depends on the middle-wheel steering as well as front/rear wheel steering. In addition, a new 6WS control law is proposed in order to minimize the sideslip angle. Lane change simulation results demonstrate the advantage of 6WS vehicles with the proposed control law.