• 한국산학기술학회논문지
• /
• 제15권12호
• /
• pp.6993-6997
• /
• 2014

본 연구의 목적은 자성유체 스피커의 보이스 코일 방열 및 음질 저하 문제를 극복하기 위하여 무향실내에서 자성유체 스피커의 음 왜곡률, 음압레벨 및 주파수 특성과 같은 음질 성능 특성을 고찰하는 것이다. 이를 위하여 자성유체 스피커에서 자성유체 주입량 및 영구자석 자력을 변화시켜가면서 음압 성능을 측정하였다. 그리고 스피커의 음 왜곡률, 음압레벨 및 주파수 특성은 음향시스템 측정 프로그램인 Smarrt를 이용하여 측정하였다. 결과적으로, 자성유체의 주입량은 2.4 ml로 결정되었고, 자성유체를 주입할 경우 음 왜곡률 및 음압레벨은 향상되었다. 자성유체 스피커에서 영구자석의 자력을 8.06 mT에서 9.10 mT로 증가시킬 경우 주파수 특성 및 음압레벨은 더욱 향상되었다. 또한, 자성유체 스피커의 음 왜곡률은 일반 스피커에 비하여 약 0.01% 감소하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.763-766
• /
• 2004

Recently, various acoustic artifacts that contains speaker have been produced such as cellular phone. Speaker consists of diaphragm generating sound and coil vibrating diaphragm. Generally, good speaker means that it has a wide frequency range, high output power rate to input power and flat sound pressure level in specified frequency range. Acoustic characteristic was estimated through the experiment and computer simulation, or sound power was controlled with acoustic sensitivity in a natural frequency range fer last decade. However, the flatness of sound pressure level has not been considered to enhance the sound quality of a speaker. Tn this study, a method for speaker design is proposed for a good acoustic characteristic, which is flatness of SPL(sound pressure level) and wideness between the first and second natural frequency. SYSNOISE is used fer acoustic analysis and ANSYS is used for harmonic response analysis and modal analysis. Optimization for acoustic characteristics of a speaker diaphragm is performed using ModelCenter. All analyses are done within a frequency domain. And we confirm that the experimental and computational simulations have similar trend.

• ETRI Journal
• /
• 제31권6호
• /
• pp.680-687
• /
• 2009

This paper reports on an improved piezoelectric microspeaker with a high sound pressure level of 90 dB, a total harmonic distortion of less than 15%, and coherence higher than 0.9. The fabricated Pb(Zr,Ti)$O_3$ (PZT) microspeakers have a thickness of only 1 mm including the speaker frame and an active area of 18 mm${\times}$20 mm. To achieve higher sound pressure and lower distortion, the PZT piezoelectric microspeaker has a well-designed speaker frame and a piezoelectric diaphragm consisting of a tilted PZT membrane and silicone buffer layer. From the simulation and measurement results, we confirmed that the silicon buffer layer can lower the first resonant frequency, which enhances the microspeaker's sound pressure at a low frequency range and can also reduce useless distortion generated by the harmonics. The fabricated PZT piezoelectric microspeakers are implemented on a multichannel speaker array system for personal acoustical space generation. The output sound pressure at a 30 cm distance away from the center of the speaker line array is 15 dB higher than the sound pressure at the neighboring region 30 degrees from the vertical axis.

• 한국소음진동공학회논문집
• /
• 제27권2호
• /
• pp.182-188
• /
• 2017

In this work, a new type speaker which features various resonant frequencies is proposed utilizing a magneto-rheological (MR) fluid and its performance is evaluated in terms of the change of the field-dependent sound pressure level. In order to achieve this goal, a whole concept of the speaker system is firstly discussed and subsequently a controllable diaphragm is made using MR fluid whose rheological properties such as viscosity are controllable by the magnitude of magnetic field. Then, the proposed speaker system consisting of the inner structure and the squeeze mode type of MR diaphragm is established in an anechoic room The effectiveness of the proposed speaker system is experimentally evaluated at two different conditions; with and without the magnetic field. It is shown from experimental tests that the sound pressure level at different sound source can be controlled which is not able to achieve using one conventional speaker system.

• 한국전기전자재료학회논문지
• /
• 제32권2호
• /
• pp.110-115
• /
• 2019

$Pb(Sb_{0.5}Nb_{0.5})_x(Zr_{0.51}Ti_{0.49})_{1-x}O_3$ (abbreviation: PSN-PZT) ceramics were synthesized, using conventional bulk ceramic processing technology, with various PSN doping contents. The maximum density of PSN-PZT was 97% of the theoretical density in the samples sintered at $1,250^{\circ}C$. The maximum values of the piezoelectric properties achieved using the conventional processes were: $k_p$ of 0.625, $d_{33}$ of 531 pC/N, and $g_{33}$ of $33mV{\cdot}m/N$. Finally, we fabricated a piezo-speaker with the optimized PSN-PZT ceramics. The SPL of the speaker was measured at a distance of 1 m, with a driving voltage of $40V_{rms}$ in the frequency range of ~300 Hz to 9 kHz. The measured $SPL_{max}$ was at a very high level (95 dB), which was superior in quality in comparison with those of other commercial products.

• 한국음향학회지
• /
• 제26권3호
• /
• pp.115-122
• /
• 2007

본 연구에서는 마이크로스피커의 구조와 특성을 유닛과 덕트형 인클로저로 구성되어 있는 일종의 덕트형 스피커시스템처럼 취급할 수 있음을 처음으로 보여주었다. 후면기공의 면적이 증가할수록 스티프니스는 감소하고 컴플라이언스는 증가하였다. 그 결과로써, 후면기공의 면적이 증가할수록 공명진동수가 컴플라이언스의 제곱근에 비례하여 증가하였다. 후면기공의 면적이 감소함에 의하여 중저음 영역에서의 기준음압레벨이 지수함수적으로 감소하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.191-194
• /
• 2000

In this study, experimental verification of performance of flat speaker has been conducted. The piezofilm (PVDF) actuator has been designed to prevent the distortion of sound and make the frequency response of radiated sound flat. The electrode pattern of piezofilm actuator is optimized to satisfy the design objective. The formulation of design method is based on the coupled finite element and boundary element method and electrode pattern is optimized by genetic algorithm. The flat speaker with optimized piezofilm actuator has been manufactured. The sound pressure level at the distance of 50cm is measured using microphone and compared with the result of numerical simulation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.742-742
• /
• 2003

This study is about the effect of the sound pressure level of reverberation on stage acoustics. There are several electro-acoustics systems to enhance the room acoustics of concert hails but not many studies on the stage acoustics for the musicians who plays on the stages. To investigate the effect of reverberation on stage acoustics, the reverberation time of a test room has been controlled through a 4 channel speaker system, and the preferred reverberation level has been selected by performing musicians. As a result, the sound pressure level of reverberation seems to affect the perception of stage acoustics which motivates musicians' performances.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.584-588
• /
• 2021

음향시스템을 구성하는 스피커의 임피던스는 고정된 값으로 인식되고 있다. 그러나 스피커의 임피던스는 입력신호의 주파수 변화에 따라 계속 변화하고 그 변화량은 스피커의 공진 주파수 대역에서 매우 크다. 스피커의 음압 레벨은 스피커를 구성하는 코일에 흐르는 전류에 따라 결정되는데 스피커를 전압 구동 할 경우 변화하는 임피던스에 의해 음압 레벨의 왜곡이 발생한다. 스피커를 전류 구동 할 경우 이러한 문제는 해결되지만 저주파에서 공진의 영향으로 음압 레벨의 왜곡이 발생하는데 이는 음향시스템의 음질 저하를 가져올 수 있다. 본 논문에서는 전류구동 음향시스템의 음질 개선을 위해 DSP(Digital Signal Processing)를 이용하여 음압레벨의 왜곡을 보정하는 공진 보상회로를 제안한다. 본 논문은 스피커의 등가 모델을 이용한 음향 시스템의 전류 구동 모의실험을 통해 주파수 변화에 따른 음압 레벨 왜곡을 확인하고 이를 보정하는 회로를 제안하는 것으로 구성하였다. 제안한 회로는 상태변수필터를 이용하여 구성하였고 주파수 및 출력이 조절 가능하여 다양한 음향 시스템에 적용 가능 할 것으로 보인다.

• 한국소음진동공학회논문집
• /
• 제17권11호
• /
• pp.1050-1055
• /
• 2007

P.A.(public address) system is considered as an useful active soundscape appliance which can gives a place identity and vitality by introducing conventional musics, environmental musics, bird singing sounds etc. In this study, the main aim is to know the optimistic distance from the speaker and sound pressure level range of introducing sound. So, the sound pressure level of P.A. system due to distances were measured and subjects' responses with level variations were checked. The main results are as follows. Level range from 64 dB to 71 dB is comfortable for subjects. And the optimal level of introducing sound is related with sound source characteristics. The results of this study could be used for street furniture location design and P.A. system output level.