• The Journal of the Acoustical Society of Korea
• /
• v.22 no.7
• /
• pp.585-591
• /
• 2003

In this paper, fiber optic sensor using Fabry-Perot interferometer which had benefit of minimize and light-weight was used. The sensor head has 1cm in length, total length of fiber is 9.5 chi and the sensor supported at both ends, simply. To analyze the acoustic characteristic non-directional speaker is used as a sound source. Acoustic applied in lateral direction and detected two signals were compared each other. Below 1㎑ fiber optic sensor has more sensitive than microphone, but in 2㎑ fiber optic sensor has less sensitive than microphone. This characteristic varies to the supporting system of fiber optic sensor. It was confirmed that the Fabry-Perot interferometric sensor detected acoustic signal, effectively. This kind of sensor can be applied to the structural health monitoring field of intellectual structure.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.2
• /
• pp.28-37
• /
• 1992

In the study, the Acoustic transducer of a thin circular disc-type with PZT/Metal was manufactured. The 'tape casting method' was introduced to prepare the thin disc-type of piezoelectric ceramics. The acoustic characteristics of PZT/Metal acoustic transducer for piezoelectric buzzer and piezoelectric speaker etc. have been studied and analyzed. As a result, the sound pressure level (dB), in the range from -6dB to -14dB, increased with increasing the piezoelectric coeffeicient ($d_{31}$) of ceramics. The optimal conditions of the sound pressure characteristics of acoustic transducer were that the radius ratio(${\eta}$) of ceramics and metal plate is 0.7-0.8 and the thickness ratio(${\beta}$) is 1.0, and the value were -15~-165dB.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.161-164
• /
• 1999

현재 전세계적으로 멀티미디어나 고화질 TV(HDTV)등의 매체를 이용한 고품위의 미디어가 빠른 속도로 발전하고 있다. 국내에서도 앞으로의 HDTV둥의 효과적 재생 방법이나 녹음 방법에 관한 여러가지 연구가 필요하다. 그러나 현재 재생이나 녹음에 관련된 연구는 상대적으로 전송등에 관련된 연구에 비해 많은 관심을 끌지는 못한 실정이다. 다른 나라의 경우 디지털 TV에 알맞은 밀티 채널 재생방법에 대해 연구하고 최적화 방법 등의 실험이 이루어져 왔다. 그러나 국내에는 아직 이러한 연구가 미흡한 실정이며 나름대로의 국내 가정환경에 알맞는 멀티채널 스피커의 배열 방법 등에 관한 연구와 표준에 대한 필요성이 있다. 여기에서는 일반적인 가정 환경에서 5.1채널에 대응하는 스피커 배열의 최적화 실험시 고려되어야 할 사항들과 그 시스템의 평가방법에 대하여 살펴보기로 한다.

• Phonetics and Speech Sciences
• /
• v.9 no.4
• /
• pp.59-67
• /
• 2017

Regardless of their intention, listeners tend to assess speakers' personalities based on the sounds of the speech they hear. Assessment criteria, however, have not been fully investigated to indicate whether there is any relationship between the acoustic cue of produced speech sounds and perceived personality impression. If properly investigated, the potential relationship between these two will provide crucial insights on the aspects of human communications and further on human-computer interaction. Since human communications have distinctive characteristics of simultaneity and complexity, this investigation would be the identification of minimum essential factors among the sounds of speech and perceived personality impression. The purpose of this study, therefore, is to identify significant associations between the speech sounds and perceived personality impression of speaker by the listeners. Twenty eight subjects participated in the experiment and eight acoustic parameters were extracted by using Praat from the recorded sounds of the speech. The subjects also completed the Neo-five Factor Inventory test so that their personality traits could be measured. The results of the experiment show that four major factors(duration average, pitch difference value, pitch average and intensity average) play crucial roles in defining the significant relationship.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.2 s.107
• /
• pp.183-189
• /
• 2006

In mobile phones of multimedia era, microspeakers of high qualify sound are essential parts to generate human voice in speaker phone and MP3 song player. In this paper, two types of microspeakers, outer permanent magnet (PM) and combined PM type, are analyzed using electromagnetic, mechanical and their coupling analysis. For performance comparison, voice coil diameter is chosen as a design parameter to change excitation position and magnet volume for both types. For combined PM type, sound pressure level (SPL) is improved due to increased PM volume compared to outer PM type. Also, with the decreased voice coil diameter for combined PM type, the 1st resonant mode of the diaphragm is more efficiently excited due to concentrative excitation, resulting in lower and broader frequency range. Therefore, it can be said that the combined PM type microspeakers are more advantageous for high performance microspeaker which are essential for multimedia era.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.3
• /
• pp.123-127
• /
• 2008

The paper is to solve the problem of existing audio signal transfer system which has a difficulties of system organization and the increase of additional install cost and unfriendly interior. To solve the existing system, we drew the new audio signal transfer system based on PLC and evaluated it. A transmitter and a receiver were designed using the PLC chip INT5500CS. An audio signal transfer system was configured with a CD player to which audio signals are sent from the transmitter and a speaker connected to the receiver. For performance evaluation of this system, a USBPre external sound card and Smaart Live 5 which is a PC-based sound measuring program were added. As a result of our experiment, the measured signal level is $2{\sim}3$ dB lower than reference signal, latency is 16.69 ms, and the specific character of coherency is bad in high frequency band. Otherwise, this system transmits and receives signals over 90 % in good condition as a result of measuring pink noise, frequency (1 kHz), and phase, magnitude. In view of the result so far achieved, the system designed this study has excellent performance, it resolves defect of existing audio signal transfer system.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.6
• /
• pp.719-725
• /
• 2008

In this paper, noise and vibration reduction for floating-floored ship cabin is studied. A mock-up is built by using 6 mm steel plate, and two identical cabins are made for simulation of ship cabins. When a speaker is used as a sound and vibration sources, it is shown that floating floor is more effective in isolating sound than bare deck by 2-5 dB. It is also shown that structure-borne noise of the bare deck is greater than that of floating-floored deck by 3-10 dB. For tapping machine excitation, it is found that the effect of floating floor in airborne noise and structure-borne noise reduction reaches up to 40-50 dB for high frequency ranges.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.497-502
• /
• 2005

In mobile phones of multimedia era, microspeakers of high quality sound are essential parts to generate human voice in speaker phone and MP3 song player. In this paper, two types of microspeakers, outer permanent magnet (PM) and combined PM type, are analyzed using electromagnetic, mechanical, acoustical and their coupling analysis. For performance comparison, voice coil diameter is chosen as a design parameter to change excitation position and magnet volume for both types. For combined PM type, sound pressure level (SPL) is improved due to increased PM volume compared to outer PM type. Also, with the decreased voice coil diameter for combined PM type, the 1st resonant mode of the diaphragm is more efficiently excited due to concentrative excitation, resulting in lower and broader frequency range. Therefore, it can be said that the combined PM type microspeakers are more advantageous for high performance microspeaker which are essential for multimedia era.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.19 no.1
• /
• pp.119-127
• /
• 2023

Recently, deep learning has been used in the development of various institutional devices and services to help the visually impaired people in their daily lives. This is because not only are there few products and facility guides written in braille, but less than 10% of the visually impaired can use braille. In this paper, we propose a system that recognizes beverage cans in real time and outputs the beverage can name with sound for the convenience of the visually impaired. Five commercially available beverage cans were selected, and a CNN model and a YOLO model were designed to recognize the beverage cans. After augmenting the image data, model training was performed. The accuracy of the proposed CNN model and YOLO model is 91.2% and 90.8%, respectively. For practical verification, a system was built by attaching a camera and speaker to a Raspberry Pi. In the system, the YOLO model was applied. It was confirmed that beverage cans were recognized and output as sound in real time in various environments.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.12
• /
• pp.97-104
• /
• 2023

In this paper, we propose a harmful bird repellent system using directional speakers. Existing sound systems for the extermination of harmful birds have the disadvantage of reducing effectiveness due to the learning effect of birds due to problems caused by noise pollution and monotonous sounds. In this paper, directional speakers are used to minimize surrounding noise. In addition, the up-down and left-right angles of the speaker driving device were freely adjusted to maximize usability. Additionally, the problem of performance degradation due to learning effects was solved by using various scanning patterns. In the future, we plan to develop a platform capable of central control by applying remote control functions and a deep learning model that can recognize bird species.