• Korean Journal of Remote Sensing
• /
• v.32 no.3
• /
• pp.275-285
• /
• 2016

This study analyzes the accuracy of ortho imagery based on whether camera calibration performed or not, using an unmanned aerial vehicle which equipped smart camera. Photgrammetric UAV system application was developed and smart camera performed image triangulation, and then created image as ortho imagery. Image triangulation was performed depending on whether interior orientation (IO) parameters were considered or not, which determined at the camera calibration phase. As a result of the camera calibration, RMS error appeared 0.57 pixel, which is more accurate compared to the result of the previous study using non-metric camera. When IO parameters were considered in static experiment, the triangulation resulted in 2 pixel or less (RMSE), which is at least 200 % higher than when IO parameters were not considered. After generate ortho imagery, the accuracy is 89% higher when camera calibration are considered than when they are not considered. Therefore, smart camera has high potential to use as a payload for UAV system and is expected to be equipped on the current UAV system to function directly or indirectly.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.132-136
• /
• 2010

Psychophysical experiment was performed to investigate how audio-visual spatial disparity affects on perceptual space in peripheral vision. In the experiment, participants were exposed to two stimuli of vision and sound which comes simultaneously from different directions, respectively. The visual stimulus was implemented by 7 white LEDs which were located at an equal distance with 7 different angles of $-70^{\circ}$, $-40^{\circ}$, $-20^{\circ}$, $0^{\circ}$, $20^{\circ}$, $40^{\circ}$, and $70^{\circ}$ from the right front. Those audial stimuli were also implemented by loudspeakers which were placed at 9 different directions equally spaced by $5^{\circ}$ ranged from $-20^{\circ}$ to $20^{\circ}$. Each participant then evaluated spatial disparity between visual and audial stimuli with 5 levels of response, in which the higher level indicates the larger gap. When the visual stimulus is applied from the right, the results show that the response level gets higher for a larger angle between visual and auditory stimuli. A similar tendency for the visual stimulus with $0^{\circ}$ orientation was also be observed. On the other hand, when the visual stimulus is applied from the left, the response level gets lower for the larger angle.

• Journal of the Korean housing association
• /
• v.8 no.1
• /
• pp.37-48
• /
• 1997

The purpose of this study supply data that can make a living room a more comfortable space by using a plan of furniture usage, that is to say more affective to human's mental and physical character. For this purpose made experiment with slide film on 39 representative descriptions. The object of this research was female university students and to analyze the data. factor analysis. One-way ANOVA and scheffe-test were used by running SPSS PC+ program. The major results are as follows. In experiment with slide film for grasping spatial effect and evaluation on the 39 representative descriptions, three dimensions(clearness. openness. variety) extracted as the result of factor analysis. Especially the result of this study - sizes of space put independent valuables and each demotion put dependent valuables - shows differences according to space’ size.

• Progress in Superconductivity and Cryogenics
• /
• v.3 no.2
• /
• pp.77-83
• /
• 2001

The thermal characteristics of solid nitrogen are investigated by experiment and analysis for the purpose of evaluating its feasibility as a cooling medium for HTS (high T$_{c}$ superconductor) magnets. A cryostat to refrigerate a liquid-nitrogen container well below its freezing temperature with a 2-stage GM cryocooler is designed and constructed. The spatial distribution of temperature is measure as a function of time during the freezing and melting processes. from which the thermal diffusivity of solid nitrogen can be approximately calculated. the freezing process is formulated and solved by the integral method with an assumption of phase equilibrium at the solid-liquid interface and experimental observation. It may be concluded that the thermal diffusion in solid phase is much slower than in liquid and the degree of super-saturation is quite severe in the solidification of nitrogen.n.

• Progress in Superconductivity and Cryogenics
• /
• v.2 no.1
• /
• pp.14-18
• /
• 2000

This paper describes a series of experiments to investigate the operational characteristics of a superconducting power supply with superconducting excitation coil. In this experiment, the superconducting excitation coil is introduced to control the pole-flex in the air gap of the machine. The operating current of the superconducting powder supply is designed to have the value of 300 [A] for the rotational speed of 600 rpm. Sensors installed on the Nb sheet yield the information on the spatial and temporal behaviors of the magnetic field in spot and on the characteristics of the superconducting power supply.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.4 no.4
• /
• pp.263-271
• /
• 2000

To investigate the distribution of air pollutants dispersion in the horizontal wind fields, a chaff release experiment was carried out by an airplane. The temporal and spatial variations of a chaff plume from an elevated point source using the WSR-88D(NEXRAD) radar. The observed profiles of radar reflectivity were compared with the Gaussian diffusion model at slightly unstable atmospheric condition. The present study shows that the distributions of radar reflectivity from chaffs and their concentration by the model are in general agreement with time variation. The dispersion coefficients in downwind($\sigma$(sub)x) and crosswind($\sigma$(sub)y) spread data exceeded what has generally been found at Pasquill and Brigg\`s estimates. As a result, it was clearly shown that horizontal and vertical diffusion coefficients are more accurately determined as compared with theoretical coefficients. At longer diffusion distances(than 10km), a radar observation provided the determination of maximum range and diffusion height more qualitatively, too.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.321-322
• /
• 2007

When use FMO by error resilience purpose in existing $TYPE1{\sim}2$ compare. But, in This paper, TYPE $3{\sim}5$[Gradual decoder refresh tool] is used as error resilence tool. Experiment result, it shows that Y PSNR improves that use suitable TYPE's FMO. Images using in an experiment had better use Type $3{\sim}5$. Differ with existing paper, dipersed mode appeared result badly. Because spatial correlation is low, acted adversely in intra predication.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.10
• /
• pp.1941-1945
• /
• 2011

In this paper, we propose a real-time classifier to distinguish humans from livestock by using the spatial integral. The image-difference method and the Expectation Maximization are used to reduce noises in input image. A histogram analysis based on Simulated Annealing and the fuzzy-Bayesian algorithm are used to classify human and livestock. Finally, the experiment results show the validity of the proposed method.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.11-14
• /
• 2003

In block-based lossy video compression, severe quantization causes discontinuities along block boundaries so that annoying blocking artifacts are visible in decoded video imases. These blocking artifacts significantly decrease the subjective image quality. In order to reduce the blocking artifacts in decoded images, many algorithms have been proposed However studies on so called, corner outliers, have been very limited. Corner outliers make image edges look disconnected from those of neighboring blocks at cross block boundary. In order to solve this problem, we propose a corner outlier detection and compensation algorithm as post-processing in spatial domain The experiment results show that the proposed method provides much improved subjective image quality.

• 한국지형공간정보학회:학술대회논문집
• /
• 2005.08a
• /
• pp.51-59
• /
• 2005

With industrial development, industrial products became more refined and upscale, resulting in increased necessity for manufacturers to come up with a method to check whether products have been produced to meet the needs of the customer. For thisreason, attention was drawn to industrial photogrammetry to obtain data rapidly without contacting the target object. In this study, the experiment has been conducted with the O-2A aircraft to determine the applicability of industrial photogrammetry.