• 디지털산업정보학회논문지
• /
• 제10권4호
• /
• pp.71-78
• /
• 2014

Method a target estimation in spatial are mobile wireless communication using network cell and GPS. It have much error that mobile wireless communication depend on cell size. GPS method can't find a target in shadow and inner area. In this paper, we estimate a target as direction of arrival method using adaptive array antenna system. Adaptive array antenna system can obtain desired signal to remove other signal This paper studied digital beamforming method in order to estimation a target. Proposed method is modified optimum weight and antenna error correction to estimation an optimal receive signal. Digital beamforming method decided a signal phase and amplitude from received signal on array antenna element. But if it is not to do error correction of received signal, system performance have decreased. Firstly, we proposed modified optimum weight in order to finding desired target. Secondly, we are error correction of antenna incident signals by optimal weight before digital beamforming method. Thirdly, throughly simulation, we showed that system performance of proposed method compare proposal method with general method. It have improved resolution of estimation target to good performance more proposed method than general method.

• 한국인터넷방송통신학회논문지
• /
• 제13권2호
• /
• pp.137-142
• /
• 2013

도래 방향 추정은 공간상에서 안테나에 수신된 원하는 신호의 입사 방향을 추정하는 것이다. 본 논문에서는 레이더에서 다중 빔 형성을 이용하여 신호 도래 방향을 추정하였다. 신호 도래 방향의 추정방법으로 본 논문에서는 빔 조향 제안 알고리즘과 공간 상관 행렬 가중치를 이용하였다. 모의실험을 통하여 본 연구에서 제안된 알고리즘 성능을 기존 알고리즘과 비교분석하였다. 목표물 도래방향 추정에서 본 연구에서 제안한 방법이 고유치 전개를 하지 않기 때문에 처리시간 단축에서 효과적이다. 본 연구에서 제안한 방법이 목표물 추정에서 기존 알고리즘보다 우수함을 나타내었다.

• 대한공간정보학회지
• /
• 제18권2호
• /
• pp.107-112
• /
• 2010

풍력발전은 자연 상태의 무공해 에너지원이며 신재생에너지 중 가장 경제성이 높은 에너지원이다. 최근 소형 풍력 발전의 개발에 따라 단지나 초고층 건축물에도 풍력 발전 시설 설치가 가능해졌다. 이러한 지역에서의 효율적인 발전을 위해서는 적절한 입지 분석이 필요하다. 본 연구에서는 부산시를 대상으로 계층적 분석 기법을 이용하여 풍력 발전 시 요구되어지는 요인들의 상대적 가중치를 산정하고 부산시의 풍속과 풍향의 특징을 나타내었고 지형 공간정보체계를 이용하여 강서구, 기장군, 사하구 지역 내에서 녹산동, 철마면, 다대1동으로 후보지를 선정하였다.

• 한국공간구조학회논문집
• /
• 제18권2호
• /
• pp.69-78
• /
• 2018

In current research, it was attempted a preliminary design and evaluation of non-uniform ultra high-strength concrete (UHSC) truss members. UHSC used here has the compressive strength of 180 MPa, the tensile strength of 8 to 20 MPa, and the tensile strain after cracks up to 2%. By the three-dimensional finite element stress analysis as well as strut-tie approach on concrete solid beams, the non-uniform truss shape of UHSC truss was designed with the architectural esthetic concept. In a series of examples, to compare with conventional concrete members, the proposed UHSC truss members have advantages in capabilities of the slender design with minimum weight with high performances under transverse loadings as well as the aesthetically non-uniform design for spatial structures.

• 한국수산과학회지
• /
• 제36권6호
• /
• pp.757-761
• /
• 2003

Spatial distribution and biomass of commercial shellfish were investigated in the Saemangeum tidal flat on the west coast of Korea during August 1999. Thirteen species of shellifsh were collected. Major dominant species of the study area were Umbonium thomasi with a density of $6.7\;ind.{\cdot}m^{-2}\;(38.2\%)$, Mactra veneriformis with $6.6\;ind.{\cdot}m^{-2}\;(37.4\%)$ and Reticunassa festiva with $1.3\;ind.{\cdot}m^{-2}\;(7.2\%)$. Commercially important species such as M. veneriformis ($90.7\;ind.{\cdot}m^{-2}\;69.3\%$), M. lusoria ($15.6\;ind.{\cdot}m^{-2}\;11.9\%)$), C. sinensis ($8.7\;ind.{\cdot}m^{-2}\;6.7\%)$) were dominant in total weight. Most of the shellfish were distributed between the mid-littoral and sub-littoral zones, but C. sinensis and L. flexuosa were distributed mainly in the polluted areas of the supra-littoral zone. The spatial distribution pattern of each shellifsh species generally resembles the Mangyeong and Dongjin estuary. Biomass of commercially important species, M. veneriformis, M. lusoria, C. sinensis and Ruditapes philippinarum in the tidal flat (ca. 850 ha) was estimated to be 774, 135, 67 and 10 tons, respectively.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.259-264
• /
• 2006

It is well known that the uncertainty of the covariance parameters of the process noise (Q) and the observation errors (R) has a significant impact on Kalman filtering performance. Q and R influence the weight that the filter applies between the existing process information and the latest measurements. Errors in any of them may result in the filter being suboptimal or even cause it to diverge. The conventional way of determining Q and R requires good a priori knowledge of the process noises and measurement errors, which normally comes from intensive empirical analysis. Many adaptive methods have been developed to overcome the conventional Kalman filter's limitations. Starting from covariance matching principles, an innovative adaptive process noise scaling algorithm has been proposed in this paper. Without artificial or empirical parameters to be set, the proposed adaptive mechanism drives the filter autonomously to the optimal mode. The proposed algorithm has been tested using road test data, showing significant improvements to filtering performance.

• Current Optics and Photonics
• /
• 제5권6호
• /
• pp.606-616
• /
• 2021

A photonic integrated interferometric imaging system possesses the characteristics of small-scale, low weight, low power consumption, and better image quality. It has potential application for replacing conventional large space telescopes. In this paper, the principle of photonic integrated interferometric imaging is investigated. A novel lenslet array arrangement and lenslet pairing approach are proposed, which are helpful in improving spatial frequency coverage. For the novel lenslet array arrangement, two short interference arms were evenly distributed between two adjacent long interference arms. Each lenslet in the array would be paired twice through the novel lenslet pairing approach. Moreover, the image reconstruction model for optical interferometric imaging based on compressed sensing was established. Image simulation results show that the peak signal to noise ratio (PSNR) of the reconstructed image based on compressive sensing is about 10 dB higher than that of the direct restored image. Meanwhile, the normalized mean square error (NMSE) of the direct restored image is approximately 0.38 higher than that of the reconstructed image. Structural similarity index measure (SSIM) of the reconstructed image based on compressed sensing is about 0.33 higher than that of the direct restored image. The increased spatial frequency coverage and image reconstruction approach jointly contribute to better image quality of the photonic integrated interferometric imaging system.

• 산업공학
• /
• 제11권3호
• /
• pp.15-22
• /
• 1998

A new improved algorithm in edge location to subpixel accuracy using decent-based weight to spatial information is proposed in this paper and applied to automated visual inspection(AVI) system. An application of the new edge operator as an edge detector is also provided and compared with Tabatabai and Lyvers edge detectors. The existing algorithms located edger to subpixel accuracy using least-square or moment-based methods. The algorithms also use only spatial information or grey-level values to locate edges. However, the proposed algorithm consider the weighted sum of grey-levels values of each edge pattern. The results show that the proposed algorithm is relatively less biased and has smaller standard deviation than the edge operations developed by Tabatabai and Lyvers in the presence of noise.

• 한국공간구조학회논문집
• /
• 제20권3호
• /
• pp.35-42
• /
• 2020

The purpose of this study is to develop precast concrete modules that can be used as a booth and a single-story building with a large space. This precast concrete module is originally designed to have a hexagonal facade when the upper and lower parts, which are symmetrical about horizontal connection line, are combined. A structural design was conducted to ensure structural safety of these precast concrete modules and to extend the slope of the inclined members as far as possible. Then the finite element analysis was performed to estimate the lateral and vertical deflection of complete precast concrete modular structures. And to verify the structural safety of these precast concrete modules, weight loading tests were conducted on the upper and lower modules respectively.

• 한국공간구조학회논문집
• /
• 제2권3호
• /
• pp.61-70
• /
• 2002

The objective of this study is the development of a size and shape discrete optimum design algorithms, which is based on the genetic algorithms and the fuzzy theory. This algorithms can perform both size and shape optimum designs of plane and space trusses. The developed fuzzy shape-GAs (FS-GAs) was implemented in a computer program. For the optimum design, the objective function is the weight of structures and the constraints are limits on loads and serviceability. This study solves the problem by introducing the FS-GAs operators into the genetic.