• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.623-629
• /
• 2002

In transmitting compressed video bit-stream over Internet, packet losses cause error propagations in both spatial and temporal domains, which in turn leads to severe degradation I image quality. In this paper, a new error concealment algorithm, called EBMA(Edge Detection based Boundary Matching Algorithm), is proposed to repair damaged portions of the video frames in the receiver. Conventional BMA(Boundary Matching Algorithm) assumes that the pixels on the boundary of the missing block and its neighboring blocks are very similar, but has no consideration of edges across the boundary. In our approach, the edges are detected across the boundary of the lost or erroneous block. Once the orientation of each edge is found, only the pixel difference along the expected edges across the boundary is measured instead of the calculation of difference along the expected edges across the boundary is measured instead of the calculation of differences between all adjacent pixels on the boundary Therefore, the proposed approach needs very few computations and the experiment shows and improvement of the performance over the conventional BMA in terms of both subjective and objective quality of video sequences.

• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.353-361
• /
• 2013

To analyze the distribution of earthquake-induced strain data in rock masses, statistical analysis was performed on four-directional strain data obtained from a ground movement monitoring system installed in Korea. Strain data related to the 2011 Tohoku-oki earthquake and two aftershocks of >M7.0 in 2011 were used in x-MR control chart analysis, a type of univariate statistical analysis that can detect an abnormal distribution. The analysis revealed different dispersion times for each measurement orientation. In a more comprehensive analysis, the strain data were re-evaluated using multivariate statistical analysis (MSA) considering correlations among the various data from the different measurement orientations. $T_2$ and Q-statistics, based on principal component analysis, were used to analyze the time-series strain data in real-time. The procedures were performed with 99.9%, 99.0%, and 95.0% control limits. It is possible to use the MSA data to successfully detect an abnormal distribution caused by earthquakes because the dispersion time using the 99.9% control limit is concurrent with or earlier than that from the x-MR analysis. In addition, the dispersion using the 99.0% and 95.0% control limits detected an abnormal distribution in advance. This finding indicates the potential use of MSA for recognizing abnormal distributions of strain data.

• Korean Journal of Remote Sensing
• /
• v.30 no.6
• /
• pp.829-837
• /
• 2014

The KOMPSAT-3 can acquire panchromatic stereo image with 0.7 m spatial resolution, and provides Rational Polynomial Coefficient (RPC). In order to determine ground coordinate using the provides RPC, which include interior-exterior orientation errors, its adjustment is needed by using the Ground Control Point (GCP). Several thousands of national Unified Control Points (UCPs) are established and overall distributed in the country by the Korean National Geographic Information Institute (NGII). UCPs therefore can be easily searched and downloaded by the national-control-point-record-issues system. This paper introduced the point-extraction method and the distance-bearing method to detect of UCPs. As results, the distance-bearing method was better detected through the experiment. RPC adjustment using this method was compared with that by only one UCP and GCPs using GPS. The proposed method was more accurate than the other method in the horizontal. As demonstrated in this paper, the proposed UCPs detection method could be replaced GPS surveying for RPC adjustment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.110-122
• /
• 2014

As multimedia technologies develop, three-dimensional (3D) technologies are attracting increasing attention from researchers. In particular, video quality assessment (VQA) has become a critical issue in stereoscopic image/video processing applications. Furthermore, a human visual system (HVS) could play an important role in the measurement of stereoscopic video quality, yet existing VQA methods have done little to develop a HVS for stereoscopic video. We seek to amend this by proposing a 3D visual attention (3DVA) model which simulates the HVS for stereoscopic video by combining multiple perceptual stimuli such as depth, motion, color, intensity, and orientation contrast. We utilize this 3DVA model for pooling on significant regions of very poor video quality, and we propose no-reference (NR) stereoscopic VQA (SVQA) method. We validated the proposed SVQA method using subjective test scores from our results and those reported by others. Our approach yields high correlation with the measured mean opinion score (MOS) as well as consistent performance in asymmetric coding conditions. Additionally, the 3DVA model is used to extract information for the region-of-interest (ROI). Subjective evaluations of the extracted ROI indicate that the 3DVA-based ROI extraction outperforms the other compared extraction methods using spatial or/and temporal terms.

• Geophysics and Geophysical Exploration
• /
• v.4 no.1
• /
• pp.8-18
• /
• 2001

To delineate the inhomogeneities including fractures and to estimate the freshness of rock borehole radar consisting of the reflection and tomography methods, and GPR surveys were conducted at a granite quarry mine. The borehole reflection survey using the direction finding antenna was also conducted to get the spatial orientations of reflectors. 20 MHz was adopted as the central frequency for the borehole radar reflection and tomography surveys and 100 MHz was for GPR. Through the interpretation of borehole reflection data using dipole and direction finding antenna as well as GPR images, which are good agreement with each other, we could determine the orientation of the major fractures in three dimensional way. Parts of travel time curves of tomography data showed the anisotropy, which is uncommon in granite quarry. By comparing the tomography data and TeleViewer images, the anisotropy effect in this area are closely related to fine fissures aligned in the same direction. The area confined by the two fractures, MF2 and MF5, might consist of the most fresh granite in the surveyed area, which was concluded from the borehole radar tomography, and GPR images as well as the distribution of anisotropy.

• Journal of the Korean Geographical Society
• /
• v.49 no.2
• /
• pp.113-138
• /
• 2014

Despite the growing numbers of regional problems (e.g. conflicts between the state and localities, inter-local conflicts, etc.) associated with the state-led developmental projects, the Korean social sciences have been unable to offer satisfying explanations and solutions to the regional problems. This is mainly because the existing works, which have been taken captured by the assumptions of "methodological nationalism", significantly lack the socio-spatial understandings of the state actions and the relations between the state and localities, thereby seeing the issues of regional development mainly in terms of either the economic efficiency defined at the national scale, or the plan rationality of the national bureaucrats. With this problem orientation in mind, this paper aims to explore the ways in which the state and localities are interacting, conflicting and negotiating with one another through the mediation of the state-led developmental projects. Focusing on the developmental processes of Masan Export Processing Zone from the mid-1960s to the early 1970s, it examines the multi-scalar processes through which the state-led industrial complex developmental processes have been influenced by the complex and dynamic interactions among social forces and actors acting at diverse geographical scales (e.g. the global, national, local, urban, etc.). This analysis shows that the regional policies of the Korean developmental state were more heavily influenced by the interactions, contestations, and collaborations among social forces and actors, acting in and through the state, at various geographical scales, rather than by the economic and techno-bureaucratic rationality.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.5
• /
• pp.1-15
• /
• 2002

The purpose of this study is to consider the relationship between point of view and prospect behavior occurring in the experience of a painted landscape. This study analyzes one hundred scenes from the 'real landscape painting' by Kyumjae, one of the most famous landscape painters in 18th century Korea. The results of the study are as follows: 1. It clarified that Kyumjae's real landscape painting's 100 scenes have many view points such as roads, bridges, pavilions, mansions, towers, terraces, hillsides, bases of mountains, broad flat roots, brooksides, and ferries that are apt to occur in the experience of a landscape. The spatial characteristics of view points are expanded fields of vision, evening and night scenes, edges of landforms and structures from which to improve ones vantage point. 2. It showed that 99 out of real landscape painting's 100 scenes depict a view point'to look'and 79 of 'to look through', 73 of 'look around'and 24 of 'to look over'. 3. It showed that real landscape painting's 100 scenes depict that the view point 'to look' is mainly upon a road from which people are looking over an elevated landscape such as the top of a mountain or rockwall. The view behaviors of looking down are depict 15 pavilions, 14 mansions, 2 broad rocks and 10 mountain tops on which people experience landscapes such as fields, rural communities and streams. The view behaviors to look depict 33 ships, 24 roads, 24 pavilions, 19 mansions and 12 terraces on which people experience landscapes such as distant views of mountains, rivers and landscapes. The view behaviors to look around to obtain orientation of landscape are depict 16 pavilions, 10 mountaintops. To glimpse on the way of journey depict 33 ships and 29 roads. To look over depict 11 mansions and 6 pavilions on which experience borrows the landscape. To look through landscapes such as rivers, mountains and rockwalls depict 15 roads, 14 pavilions and 11 mansions. To exchange looks depict 30 ships, 14 roads, 12 pavilions and 12 mansions. We expect that these results might give clues toward the experience of landscapes and the practice of landscape design methods which select viewpoints, and in the design of view points suitable to prospect behaviors.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.27-38
• /
• 2015

In this study, the 3D position coordinates were calculated for the targets using DLT and self-calibration bundle adjustment with additional parameters in close-range photogrammetry. And then, the accuracy of the results were analysed. For this purpose, the results of camera calibration and orientation parameters were calculated for each images by performing reference surveying using total station though the composition of experimental conditions attached numerous targets. To analyze the accuracy, 3D position coordinates were calculated for targets that has been identically selected and compared with the reference coordinates obtained from a total station. For the image coordinate measurement of the stereo images, we performed the ellipse fitting procedure for measuring the center point of the circular target. And then, the results were utilized for the image coordinate for targets. As a results from experiments, position coordinates calculated by the stereo images-based photogrammetry have resulted out the deviation of less than an average 4mm within the maximum error range of less than about 1cm. From this result, it is expected that the stereo images-based photogrammetry would be used to field of various close-range photogrammetry required for precise accuracy.

• Korea journal of population studies
• /
• v.21 no.2
• /
• pp.113-143
• /
• 1998

Married women who follow occupations have remarkably increased. Economic-activies married women[EAMW] have experienced a great degree of role confilcts as the results of that they should play the role of wage workers and do duty as household affairs as well as raise children. To understand problems of EAMW and to make alterniative plans for EAMW, the daily life actives of EAMW should be examined. This study attempts to understand the daily life activites of EAMW. To obtain the goal this research generalizes the daily life actives of EAMW. classifies the patterns the activites, and analyzes the activites in the micro-level. The acivites of EAMW mainly consist of formal business and household affairs. The spatial bounds of activities are influenced by weekdays and holidays. During the weekday their activities are mainly found around residences and/or work places; while, during the weekend, they are discovered around residences and/or around residences or relatives who take care of their children. EAMW move longer distance rather than a full-time housewife; however, the activites of EAMW are residential orientation like those of full-time housewives. The role conflicts of EAMW are mainly from social cultural structure, the distance between workplace and residence, and the location of public service institutes.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.3
• /
• pp.209-231
• /
• 2015

In granite quarry, stones are generally quarried along easily separating planes called as 'rock cleavage'. Because orientation and characteristics of the rock cleavage are directly involved with easy quarrying, it is the most important factor on selecting a direction of digging. Using AMS (anisotropy of magnetic susceptibility), we attempt to interpret rock fabrics in Geochang Granite Stone (JS, SD, AR, GD, BW, MD quarry) and discuss about determination of rock cleavages and correlation between the rock fabrics and cleavages. Based on mean susceptibility, thermo-susceptibility curves, and hysteresis parameters, Ti-poor MD and/or PSD magnetites are the main contributor to AMS of the granite stones. The systematic magnetic foliations with sub-vertical dip angle are developed in the whole granite quarries. In most of the granite quarries, the magnetic foliations are significantly consistent with grain plane. In the BW quarry, which has higher $P_J$ values than the others, the magnetic foliations coincide exceptionally with rift plane. These results suggest that rock cleavages in granite stone are related to rock fabrics meaning shape and spatial arrangement of crystals. Magnetic fabrics analysis using AMS method, therefore, can be a quantitative and effective tool for determination of rock cleavages in granite quarry.