• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.216-227
• /
• 2004

A new cavitating model by using bubble size distribution based on bubbles-mass has been proposed. Both liquid and vapor phases are treated with Eulerian framework as a mixture containing minute cavitating bubbles. In addition vapor phase consists of various sizes of vapor bubbles, which are distributed to classes based on their mass. The bubble number-density for each class was solved by considering the change of the bubble-mass due to phase change as well as generation of new bubbles due to heterogeneous nucleation. In this method, the bubble-mass is treated as an independent variable, and the other dependent variables are solved in spatial coordinates and bubble-mass coordinate. Firstly, we employed this method to calculate bubble nucleation and growth in stationary super-heated liquid nitrogen, and bubble collapse in stationary sub-cooled one. In the case of bubble growth in super-heated liquid, bubble number-density of the smallest class based on its mass is increased due to the nucleation. These new bubbles grow with time, and the bubbles shift to larger class. Therefore void fraction of each class is increased due to the growth in the whole class. On the other hand, in the case of bubble collapse in sub-cooled liquid, the existing bubbles are contracted, and then they shift to smaller class. It finally becomes extinct at the smallest one. Secondly, the present method is applied to a cavitating flow around NACA00l5 foil. Liquid nitrogen and liquid oxygen are employed as working fluids. Cavitation number, $\sigma$, is fixed at 0.15, inlet velocities are changed at 5, 10, 20 and 50m/s. Inlet temperatures are 90K in case of liquid nitrogen, and 90K and 1l0K in case of liquid oxygen. 110K of oxygen is corresponding to the 90K of nitrogen because of the same relative temperature to the critical one, $T_{r}$=$T/T_c^{+}$. Cavitating flow around the NACA0015 foils was properly analyzed by using bubble size distribution. Finally, the method is applied to a cavitating flow in an inducer of the LE-7A hydrogen turbo-pump. This inducer has 3 spiral foils. However, for simplicity, 2D calculation was carried out in an unrolled channel at 0.9R cross-section. The channel moves against the fluid at a peripheral velocity corresponding to the inducer revolutions. Total inlet pressure, $Pt_{in}$, is set at l00KPa, because cavitation is not generated at a design point, $Pt_{in}$=260KPa. The bubbles occur upstream of the foils and collapse between them. Cavitating flow in the inducer was successfully predicted by using the bubble size distribution.

• Journal of Korea Water Resources Association
• /
• v.35 no.4 s.129
• /
• pp.359-366
• /
• 2002

The damages from the natural disasters, especially from the floods, have been increasing. Therefore, it is imperative to establish a BMP to diminish the damages from the floods and to enhance the welfare of the nation. Developed countries have been generating and utilizing flood risk maps to raise the alertness of the residents, and thereby achieving efficient flood management. The major objectives of this research were to develop a prototype management system for flood risk map to forecast the boundaries oi the inundation and to plot them through the integration of geographic and hydrologic database. For more efficient system development, the user requirement analysis was made. The GIS database design was done based on the results from the research work of river information standardization. A GIS database for the study area was built by using topographic information to support the hydrologic modeling. The developed prototype include several modules; river information edition module, map plotting module, and hydrologic modeling support module. Each module enabled the user to edit graphic and attribute data, to analyze and to represent the modeling results visually. Subjects such as utilization of the system and suggestions for future development were discussed.

• Journal of Korea Water Resources Association
• /
• v.45 no.1
• /
• pp.1-13
• /
• 2012

Various input data required for water quality modeling have considerable impacts on modeling results and relevant analysis due to the absence of data standardization and lack of data accuracy. With this in mind, this study mainly focused on the designing Korean Reach File for more effective water quality modeling through the supply of database composed with accurate hydraulic and hydrologic data. The Korean Reach File is the hydraulic database with the locational information of individual reaches, and each reach represents the stream reach of homogeneous hydraulic characteristics. In detail, it has reach code designating each stream reach, and topological information including catalog unit, segment, marker and index. It was also designed considering linkage of existing codes such as stream name and stream code. The devised reach code was implemented to Kyungan River at the City of Gwangju of Kyunggi Province and the results showed that the reach code could effectively support the input database integrating basic numerous data required for water quality modeling based on a criterion as well as easier linkage and utilization with existing database. In addition, more systematic water quality management was enabled through the linkage of existing data such as treatment facilities, pollutant data, and management institutes using the reach codes defined for each stream section. In the future, more efforts need to be made to adopt the reach code as the national standard data thereby enabling utilization of numerous relevant database through the assigning of reach code to individual stream reaches nationwide.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.31 no.1
• /
• pp.67-87
• /
• 2020

The purpose of this study is to analyze current status and teacher librarians' perceptions of school library space composition and indoor environment, and propose some methods for the school library to be a basic educational facility. The space most secured by the 126 teacher librarians who participated in the survey was the free reading area, and the space with the lowest level was the media production and group project area. The most important types of spaces for teacher librarians are the teaching area and the free reading area, while the recognition of the importance of media production and group project areas is relatively low. Among the elements of indoor environmental assessment, they showed that safety and comfort were the most important but diversity and flexibility were relatively less important. The result of this analysis is different from the school and library policy direction that emphasizes the learning commons and maker spaces. Teacher librarians still seem to appreciate the importance of traditional library space. Therefore, it is necessary to include the establishment and operation of maker spaces and learning commons in the teacher librarians training and retraining process. In addition, it is necessary to increase the participation of users such as teachers, students, and parents in space composition and interior design initiatives to increase the user's interior environment satisfaction.

• Journal of Biomedical Engineering Research
• /
• v.18 no.3
• /
• pp.291-299
• /
• 1997

As a microimaging device detecting gamma rays emitted from small lesions or tumors during operation, the intraoperative surgical probe has been proposed and is now under development. We have designed a multipurpose portable gamma prove system and evaluated the performance both for the absolute counting purpose of residual radioactivities and for the localizing capability of gamma events using the NaI(Tl) crystal and two types of photomultiplier tubes(PMTs). Counting efficiencies in the range of routine clinical use of radiation dose were measured using the assembly of single channel PMTs and 0.5 inch thick NaI(Tl) crystal of 1 inch diameter. The positioning of gamma events for imaging purpose requires the multiple channel PMTs with appropriate positioning electronics. We have designed a simple and reliable positioning circuit based on the concept of modified Anger. In preliminary experiments using the multiple channel PMT of 3 inch diameter and the dim lighth source, we were able to trace and localize the correct position with reduced positioning error by the use of two multiplier/divider chipset and simplified peripherals. The energy resolutions for the counting gamma probe measured as full width at half maximum(FWHM) for Cs-137, F-18, Tc-99m were 12%, 13%, and 36%, respectively. The spatial resolution for the imaging gamma probe measured as FWHM for green LED was 2.9 mm. The results indicate that the currently developing probe is very promising and could be very useful for many applications in nuclear medicine. Future studies will include developing collimators, improving interface hardwares, and evaluating the system with clinical data.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.3
• /
• pp.1-17
• /
• 2016

The main aim of this study is to provide an overview of the characteristics the Oungak (五雲閣) area on the north of rear garden of Gyeongbokgung Palace which was constructed during the time of king Kojong. This study also consider the aspect of functional elements of Ocryucheon (玉流川) located in Changdeokgung Palace and how the Oungak area was used as a substitute for the Ocryucheon. The Oungak area is the private space of the king. It was built in a natural setting which used existing environment including spring water and the rock carved with inscriptions 'Cheonha-Jaeil-Bokji (天下第一福地). King Kojong tried to replace Ocryucheon with Oungak area which had played a important role of relaxation and leisure for royal family at the Ocryucheon to reconstructed Gyeongbokgung Palace. Despite being away from each other, Oungak area seems quite similar to Ocryucheon area. Oungak area and Ocryucheon have a common conditions of a location and structure of the building. Both constructed on the northernmost part of rear garden, composition of buildings and the design of waterway estimated to function as Curve-Stream Banquet. Oungak area was consisted of Ocryeonjeong (玉蓮亭) Pavilion, Oungak Building, Byeokhwasil (碧華室) Building and Cheonha-Jaeil-Bokji-Cheon (天下第一福地泉) Spring and Streams. Except Byeokhwasil Building, spatial compositions of Oungak area showed pattern that were similar to Ocryucheon area. The area was developed, moreover, to unconventional space that depended on the conditions of topography, slope, water system. First, The Ocryeonjeong Pavilion constructed to view the landscape of Seoul to Namsan Mountain. Second, the peculiar form of Cheonha-Jaeil-Bokji-Cheon Streams is estimated the shape imitated from Curve-Stream Banquet on Ocryuchon. Third, Oungak Building was constructed like a habitable house with Nongsanjeong Building in Ocryucheon. The Oungak area was constructed to improve Gyeongbokgung Palace, Consequently, the Oungak area specially characteristic of Joseon palaces's rear garden.

• The KIPS Transactions:PartB
• /
• v.16B no.1
• /
• pp.7-16
• /
• 2009

Some clustering algorithms have a problem that an image is over-segmented since both the spatial information between the segmented regions is not considered and the number of the clusters is defined in advance. Therefore, they are difficult to be applied to the applicable fields. This paper proposes the new post-processing methods, a reclassification of the inhomogeneous clusters and a region merging using Baysian algorithm, that improve the segmentation results of the clustering algorithms. The inhomogeneous cluster is firstly selected based on variance and between-class distance and it is then reclassified into the other clusters in the reclassification step. This reclassification is repeated until the optimal number determined by the minimum average within-class distance. And the similar regions are merged using Baysian algorithm based on Kullbeck-Leibler distance between the adjacent regions. So we can effectively solve the over-segmentation problem and the result can be applied to the applicable fields. Finally, we design a classification system for the segmented regions to validate the proposed method. The segmented regions are classified by SVM(Support Vector Machine) using the principal colors and the texture information of the segmented regions. In experiment, the proposed method showed the validity for various real-images and was effectively applied to the designed classification system.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.2
• /
• pp.92-101
• /
• 2020

To prevent and mitigate damage to farms due to heavy snowfall, snow weight information should be provided in addition to snow depth. This study reviews four formulae regarding snow density and weight used in extant studies and applies them in Suwon area to estimate snow weight in Korea. We investigated the observed snow depth of 94 meteorological stations and automatic weather stations (AWS) data over the past 30 years (1988-2017). Based on the spatial distribution of snow depth by area in Korea, much of the fresh snow cover, due to heavy snowfall, occurred in Jeollabuk-do and Gangwon-do. Record snowfalls occurred in Gyeongsangbuk-do and Gangwon-do. However, the most recent heavy snowfall in winter occurred in Gyeonggi-do, Gyeongsangbuk-do, and Jeollanam-do. This implies that even if the snow depth is high, there is no significant damage unless the snow weight is high. The estimation of snow weight in Suwon area yielded different results based on the calculation method of snow density. In general, high snow depth is associated with heavy snow weight. However, maximum snow weight and maximum snow depth do not necessarily occur on the same day. The result of this study can be utilized to estimate the snow weight at other locations in Korea and to carry out snow weight prediction based on a numerical model. Snow weight information is expected to aid in establishing standards for greenhouse design and to reduce the economic losses incurred by farms.

• The KIPS Transactions:PartD
• /
• v.12D no.5 s.101
• /
• pp.689-698
• /
• 2005

Various systems are used to provide the location based services. But, the existing systems have some problems which have difficulties in dealing with faster services for above million people. In order to solve it, a multi-level DBMS which supports both fast data processing and large data management support should be used. The multi-level DBMS with snapshots has all the data existing in disk database and the data which are required to be processed for fast processing are managed in main memory database as snapshots. To optimize performance of this system for location based services, the query classification component which classifies the queries for efficient snapshot usage is needed. In this paper, the query classification component in multi-level DBMS for location based services is designed and implemented. The proposed component classifies queries into three types: (1) memory query, (2) disk query, (3) hybrid query, and increases the rate of snapshot usage. In addition, it applies division mechanisms which divide aspatial and spatial filter condition for partial snapshot usage. Hence, the proposed component enhances system performance by maximizing the usage of snapshot as a result of the efficient query classification.

• Korean Journal of Remote Sensing
• /
• v.31 no.6
• /
• pp.561-570
• /
• 2015

Till now, applications of many kinds of satellite images have been accentuated in the datacentric scientific studies, researches regarding system development and concerned technologies for them are on the un-matured stage. Especially, satellite image processing requires large volume data handling and specific analysis functionalities, so that practical necessity of base study for system development is emphasized on. In the view of information system, various edged trends such as web standards, cloud computing, or web framework are utilized owing to their application benefits proven and business needs. Considered these aspects, a testing implementation was carried out using OpenStack cloud computing environment and e-government framework. As for the processing functions, WPS in GeoServer, as one of OGC web standards, was applied to perform interoperable data processing scheme between two or more remote servers. Working with the server implemented, client-side was also developed using several open sources such as HTML 5, jQuery, and OpenLayers. If it is that completed further experiments onsite applications with actual multi-data sets and extension of on-demand functionalities with the result of this study, it will be referred as an example case model for complicated and complex system design and implementation which needs cloud computing, geo-spatial web standards and web framework.