• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.173-180
• /
• 2002

The specimens with three discontinuities have been tested in uniaxial compression. The geometry of discontinuities is changed by three different parameters: flaw inclination angle, continuity, and spacing. From the tips of the discontinuities wing and secondary cracks are observed. Wing cracks initially propagate curvilinear direction and follow loading direction after some distance from the tip of the discontinuities. Two different types of secondary cracks have been observed from the study: quasi-coplanar secondary cracks and oblique secondary cracks. From the test nine different types of coalescence are observed and they show a correlation with flaw angle and ligament angle. It is attempted to simulate the observed results by using FROCK(Fractured ROCK). FROCK is a code based on the hybridized DDM(Displacement Discontinuities Method) . It is shown that FROCK has quite potential of modeling of rock fracture processes.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.493-500
• /
• 2000

Rock Mass Rating has been widely applied to the underground tunnel excavation and many other practical problems in rock engineering. However, Rock Mass Rating is hard to make out because it is difficult to estimate each valuation items through all kind of field situations and items of RMR have interdependence. So the experts of tunnel assessment have problems with rating rock mass. In this study, using multivariate analysis based on domestic data(1011EA) of water conveyance tunnel, we presented rock mass rating system which is objective and easy to use. The constituents of RMR are decided to RQD, condition of discontinuities, groundwater conditions, orientation of discontinuities, intact rock strength, spacing of discontinuities in important order. In each step, we proposed the best multiple regression model for RMR system. And using data which have been collected at other site, we examined that presented multiple regression model was useful.

• 대한기계학회논문집B
• /
• 제32권9호
• /
• pp.645-651
• /
• 2008

For a high speed train driving at 300 km/h, aero-acoustic noise is a dominant component among various noise sources. The aeroacoustic noise is mainly due to inter-coach spacings because discontinuities in the train surface significantly disturb turbulent flows. This often leads to the uncomfortableness of passengers. Interestingly, the aero-acoustic noise reduces with decreasing the mud-flap spacing of the inter-couch spacing. We perform numerical simulations to investigate flow characteristics around the inter-coach spacing. We model the inter-coach spacing as a simple 2-D cavity with flaps, and calculate the velocity and pressure field using two equation turbulence models, varying the flap spacing. The results show that a wider flap spacing develops a higher inflection point in mean velocity profiles over the cavity. It is likely that large eddies generated near the inflection point persist longer in the downstream since they are less affected by the wall. This probably induces the more aero-acoustic noises. The wider spacing also results in the larger pressure difference between the inside and outside of the cavity. This is also responsible for the increased noise since the large difference would cause a strong flow oscillations in and out of the cavity.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.639-648
• /
• 2005

Up to now, practical engineers applying simplicity value of rockfall block weight suggested in design manual without considering in-situ rockfall block weight which reflect joint characteristics. However, the size of rockfall block varies with joint spacing of discontinuities and influences over rockfall analysis results. In this paper, we estimate realistic rockfall block weight distribution using statistical invariances of joint spacing derived from scan-line survey result. And, we study whether this distribution is applicable in practical rockfall analysis directly. As the results of this study, rockfall analysis results that using rockfall block weight distribution estimated from scan-line survey show resonable and realistic outcomes.

• 한국터널지하공간학회 논문집
• /
• 제2권2호
• /
• pp.41-49
• /
• 2000

지하 터널 굴착 등의 암반 공학적 문제에 있어서 암반분류가 널리 적용되고 있다. 하지만, 조사 방법이 체계화되어 있지 않아서 터널 지질 전문가라 할지라도 암반분류에 어려움이 많은 문제점을 가지고 있다. 본 연구에서는 다변량분석을 이용하여 객관적이고 사용하기 간편한 암반분류법을 제시하였다. RMR 요소는 RQD, 절리상태, 지하수, 강도, 보정, 절리간격 순으로 중요도가 결정되었으며, 각각의 단계에서 RMR에 관한 최적의 다중회귀모형식을 제시하였다.

• 터널과지하공간
• /
• 제8권2호
• /
• pp.96-106
• /
• 1998

Rock contains discontinuities at all scales. These discontinuities make rock behave in a complex way. This paper discusses a new approach to underground design based on the theory of rock fracture mechanics. The mechanism of deformation and failure of coal was studied by observing the distributions of length, orientation and spacing of the pre-existing as well as stress-induced cracks. Different types of crack information. The crack information is dependent on the scale used. The cracks propagate along the intersections of the pre-existing cracks, and both extensile and shear crack growth occur depending on the direction of the load relative to the bedding planes. An analytical model that takes into account both shear and extensile crack growth was developed to predict the nonlinear stress-strain behavior of coal including strain-hardening and strain-softening.

• Geomechanics and Engineering
• /
• 제13권4호
• /
• pp.535-570
• /
• 2017

There are only few cases where cause and location of failure of a rock structure are limited to a single discontinuity. Usually several discontinuities of limited size interact and eventually form a combined shear plane where failure takes place. So, besides the discontinuities, the regions between adjacent discontinuities, which consist of strong rock and are called material or rock bridges, are of utmost importance for the shear strength of the compound failure plane. Shear behaviour of persistent and non-persistent joint are different from each other. Shear strength of rock mass containing non-persistent joints is highly affected by mechanical behavior and geometrical configuration of non-persistent joints located in a rock mass. Therefore investigation is essential to study the fundamental failures occurring in a rock bridge, for assessing anticipated and actual performances of the structures built on or in rock masses. The purpose of this review paper is to present techniques, progresses and the likely future development directions in experimental testing of non-persistent joint failure behaviour. Experimental results showed that the presence of rock bridges in not fully persistent natural discontinuity sets is a significant factor affecting the stability of rock structures. Compared with intact rocks, jointed rock masses are usually weaker, more deformable and highly anisotropic, depending upon the mechanical properties of each joint and the explicit joint positions. The joint spacing, joint persistency, number of rock joint, angle of rock joint, length of rock bridge, angle of rock bridge, normal load, scale effect and material mixture have important effect on the failure mechanism of a rock bridge.

• 지질공학
• /
• 제17권3호
• /
• pp.483-494
• /
• 2007

본 연구는 대단층이 발달하는 화산암 분포지역에서 암반 절취사면을 대상으로 단열의 발달특성과 이에 따른 암반분류 수정안을 제시하고자 수행되었다. 부산-울산 고속도로 건설 현장 중 해운대-기장 사이의 일광단층에 가까운 도로 절취사면 노두에서 단열계의 특성이 조사 분석되었다. 단열간격 분포의 경우 신장단열은 대수정규 분포를 보여주고 전단단열은 음의 지수 분포를 보여준다. 단열길이 누적빈도 분포 그림에서 중앙의 직선 구간이 1지점 -1.13, 2지점 -1.01, 3지점 -1.52의 지수를 가지며 멱법칙 스케일링을 지시한다. 각 지점에서 단열의 간격 및 밀도, 단열 간 교차점의 수 등을 분석하여 판단해 볼 때 암반의 안정성 및 강도는 1지점이 가장 낮고 2지점이 가장 높다. 한편, 각 지점에서 서로 연결된 단열의 최대 클러스터로 평가할 때 유체 이동의 능률은 3지점이 가장 높고 1지점이 가장 낮다. 이는 3지점이 상대적으로 단열의 길이가 긴 것들이 많으며 이들이 서로 연결하여 형성하는 최대 클러스터가 높은 비율로 전 지역에 고루 분포하고 있기 때문으로 볼 수 있다. 한편, 현장조사 자료를 토대로 응용통계기법을 이용하여 RMR 분류의 항목별 배점을 조정한 결과에 의하면, 대단층이 발달하는 화산암에서는 기존 RMR 분류 항목별 배점에 비해 현저히 다른 수정된 RMR 배점을 설정함이 타당한 것으로 나타났다. 분석결과 무결암 강도는 18, RQD는 61, 불연속면 간격 2, 불연속면 조건 2, 그리고 지하수 17의 배점이 나타났다.

• 터널과지하공간
• /
• 제13권5호
• /
• pp.344-352
• /
• 2003

시추공 또는 선형조사선과 같은 1D측선에서 측정된 절리 자료의 샘플링 편향을 보정하는 절차를 기술하였다. ID 측선에서 절리가 관측될 수 있는 확률은 측선 방향에 대한 절리의 상대적인 방향 이외에도 절리 크기, 절리 모양 및 측선 길이 등의 복합적 요인에 의하여 결정될 수 있다. 본 연구에서는 절리의 모양을 원판형이라 가정하고 절리의 방향 및 크기에 의하여 나타날 수 있는 절리 자료의 방향 편향 효과를 동시에 보정할 수 있는 방법론을 제시하고, 현장적용을 통하여 방향 편향 보정이 절리군의 방향분포에 미치는 영향에 대하여 고찰하였다. 또한, 유한 길이의 측선으로부터 산정된 절리군의 간격분포는 샘플링 영역인 측선 길이에 따라 다르게 나타날 수 있으며, 이와 같은 간격 편향에 대한 보정절차를 기술하였다.

• 한국전산유체공학회지
• /
• 제8권3호
• /
• pp.41-49
• /
• 2003

The spatial accuracy becomes first-order when second-order conservation schemes including the non-conservative interpolation in general Chimera method are used. To ensure the solution accuracy, the discontinuities must be located away from the overlapped regions, and the length of overlapped region also must be proportional to the grid spacing. In this paper, a proposed method, cut-paste algorithm, is used to satisfy above constraints. The cut-paste algorithm can generate the optimal mesh inteface region automatically, To validate the spatial and temporal accuracy due to the non-conservative interpolation, inviscid and viscous problems are tested.