• Journal of computational fluids engineering
• /
• v.12 no.4
• /
• pp.61-67
• /
• 2007

Numerical simulation of laminar flow over two spheres in a side-by-side arrangement is carried out to investigate the effect of the inter-sphere spacing on the flow characteristics. The Reynolds numbers considered are 100, 250, and 300, covering the steady axisymmetric, steady planar-symmetric, and unsteady planar-symmetric flows in the case of a single sphere. Results show that the drag and lift coefficients and wake structures are significantly modified depending on both the Reynolds number and the spacing between the spheres. At Re=100, the flow is steady planar-symmetric irrespective of the spacing, but it shows some variation according to the spacing at Re=250 and 300. That is, the flow maintains planar symmetry of the single-sphere wake at large spacings, while it loses the symmetry at small spacings due to the generation of new asymmetric vortical structures. It is also shown that the drag and lift coefficients generally increase with decreasing inter-sphere spacing because the high pressure region is formed near the gap between the spheres.

• Steel and Composite Structures
• /
• v.32 no.4
• /
• pp.549-557
• /
• 2019

The use of shear studs usually placed in the form of mechanical shear connectors makes it possible to adopt composite steel-concrete structures in various structures, and steel-concrete plate composite (SCP) is being seriously considered for the installation of storage tanks exposed to harsh environments. However, manufacturing of SCP must be based on the application of existing design guidelines which require very close arrangement of shear studs. This means that the direct application of current design guidelines usually produces very conservative results and close arrangement of shear studs precludes pouring concrete within exterior steel faceplates. In this light, an improved guideline to determine the stud spacing should be introduced, and this paper proposes an improved ratio of the stud spacing to the thickness of steel plate on the basis of numerous parametric studies to evaluate the relative influence of the stud spacing on the stability of the SCP.

• Journal of The Korean Astronomical Society
• /
• v.25 no.2
• /
• pp.105-109
• /
• 1992

We show that spacing patterns of planets and satellites in the solar system are formulatable in a single form. It is suggested that a possible explanation for the rule might be the orbital resonance effect, which has existed at an earlier epoch of the solar (planet) system. By extrapolating the formulated spacing patterns beyond the sun-Pluto distance, we find the sun-Planet X distance falls in a range ($46{\sim}79$) A. U..

• Korean Journal of Cognitive Science
• /
• v.16 no.4
• /
• pp.255-270
• /
• 2005

Memory for repeated items is better if they are repeated in a spaced than in a massed fashion (Sparing effect). To investigate the neural mechanisms of sparing effect and successful encoding, lags of repetition were manipulated at encoding stage in an event-related MU study. The behavioral data showed typical spacing effect on recognition judgment, and greater activity for items that were repeated in a spaced fashion than for items that were repeated in a massed fashion has been observed in dorsolateral frontal cortex(DLFC) and ventrolateral frontal cortex(VLFC) of left hemisphere. These conical regions also showed greater activity for novel items than for items that were repeated in a massed fashion. These findings suggest that sparing effect and its relevant successful encoding are attributed to higher level of attentional control and semantic processing.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.4
• /
• pp.357-362
• /
• 1981

This study was conducted to examine the best population density and agronomic characteristics affected by different row-widths and planting-spaces within row in safflower. As both row-width and spacing were narrowed, plant height and height to first branch were increased, and the number of branch per plant showed decrease. Plant height showed negative correlation with row-width, height to first branch showed negative correlation with row-width x spacing, and number of branch per plant had positive correlation with row width, and row-width x spacing but negative correlation with plant height. Yield was affected by spacing and row-width x spacing. In spacing, 5cm plot performed the best yield, and 30 x 5cm population density was the best cultural method to increase safflower yield. Yield had negative correlation with spacing and row-width x spacing, but positive correlation with height to first branch.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.101-110
• /
• 2007

Joint Spacing of Jointed Concrete Pavement has been uniformly designed and constructed as six-meter in Korea. However, engineering backgrounds to show the appropriateness of six-meter Joint Spacing has not been provided. In the on-going reseach of the development of Korea Pavement Reseach Program(KPRP), the optimum Joint Spacing is suggested as 6 to 8 meters according to the regional climatic conditions based on the mechanical-empirical analysis of short-term and long-term pavement distress. This study is a part of the investigation on the adequateness of Joint Spacing design specification suggested in KPRP. Joint Spacing was design and constructed as seven-meter Joint Spacing suggested as design specification in Korea Reseach Program(KPRP) and monitored the Load Transfer Efficiency(LTE), Random crack and compared with those of adjacent $6{\sim}7$ meter Joint Spacing concrete section.

• Journal of Navigation and Port Research
• /
• v.37 no.3
• /
• pp.251-256
• /
• 2013

This paper is mainly concerned with the ship-bank interaction by model test. The experiments for the characteristics of hydrodynamic interaction forces and moments between vessel and bank with a mound were carried out in the seakeeping and maneuvering basin. A series of tests were carried out with ship model in parallel course along a vertical sidewall with a mound with varying lateral spacing between model ship and sidewall, length of sidewall and water depth. From the experimental results, it indicated that the hydrodynamic interaction effects increase as length of sidewall with a mound increases. Furthermore, for lateral spacing less than about 0.2L between vessel and bank, it can be concluded that the bank effects increase largely as the lateral spacing between vessel and bank decreases. However, for spacing between vessel and bank more than about 0.3L, the interaction effects increase slowly as lateral spacing decreases. Also, for the water depth to draft ratio(h/d) less than about 1.5, the hydrodynamic interaction effects increase dramatically as h/d decreases.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.28 no.4
• /
• pp.171-181
• /
• 2024

For low-rise piloti-type buildings that suffered significant damage in the Pohang earthquake, the seismic performance of those designed by codes issued before and after the earthquake has been recently revised. This study started with the expectation that many of the requirements presented in the current codes may be excessive, and among them, the spacing of column stirrup could be relaxed. In particular, the recently revised design code of concrete structures for buildings, KDS 41 20 00, suggests that the column stirrup spacing is 1/2 of the minimum cross-sectional size or 200 mm, which is strengthened compared to KBC 2016, but relaxed than the current KDS, 41 17 00, which is 1/4 of the minimum size or 150 mm. As a result of the study, it was found that the target performance level was sufficiently satisfied by following the current standards and that it could be satisfied even if the relaxed spacing was followed. Therefore, the strict column stirrup spacing of KDS 41 17 00 could be relaxed if a wall other than core walls is recommended in the current guideline for the structural design of piloti-type buildings.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.1
• /
• pp.185-194
• /
• 1997

An experimental study has been performed on the effect of baffle parameters on shell -side heat transfer in a conventional shell-and-tube heat exchanger. The baffle spacing distance and the number of baffle were varied to investigate the behavior of unequal baffle spacing correction factor which is appeared in the Bell Delaware method for prediction of the shell-side heat transfer coefficient. It was obvious that heat duties obtained from the experiment significantly deviated from those calculated by the conventional Bell-Delaware method. A new correlation of the unequal baffle spacing correction factor was developed. It was shown that the new correlation improves the accuracy of the Bell-Delaware method considerably. This result may induce the use of the Bell-Delaware method in developing a computer software for design of shell-and-tube heat exchangers.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.5
• /
• pp.449-457
• /
• 2013

Objective: The aim of this study is to investigate the effect of Hangul font on reading speed when texts are displayed on the computer screen. Background: Reading performance is influenced by fonts. However, there are few studies of Hangul font from a cognitive perspective. Fonts could affect reading performance directly and indirectly, interacting with other visual-perceptual factors such as size, word spacing, and line spacing. Method: In experiment 1, two variables were manipulated; a frame condition(square frame non-square frame) and a stroke condition(serif sans-serif). According to each condition, one of the four fonts was applied to the texts. The height of the four fonts was controlled. The participants were asked to read aloud the presented texts. In experiment 2, the non-square frame fonts were adjusted to have approximately the same size, width, letter spacing, and word spacing as the square frame fonts. The experimental design and task used in experiment 2 were identical with experiment 1. Results: In general, reading speed was faster in the square frame fonts than in the non-square frame fonts. The reading speed was not significantly different across stroke conditions. Conclusion: The frame of Hangul font significantly influenced reading speed. These results suggest that the type of Hangul font is a factor to affect reading performance. Application: The frame of fonts should be considered in designing of new fonts. The square frame fonts should be the preferred choice to enhance legibility.