• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2003년도 추계학술발표대회 요약집
• /
• pp.310.2-310.2
• /
• 2003

• 조명전기설비학회논문지
• /
• 제12권1호
• /
• pp.3-11
• /
• 1998

스페이서 표면 파티클에 의한 오염의 영향은 SF6GIS의 절연내력을 현저히 감소시킨다. 이와 관련해서 우리는 평행평판전극 구성으로 SF6가스중에서 금속 및 비금속 파티클의 위치 및 형태를 변화시키면서 교류전압에서 섬락전압 특성과 파괴 기구에 대해서 연구했다. 주된 결과는 $\circled1$파티클 위치에 대한 섬락전압 감소의 영향은 갭중간에서 가장 적고 전극에서 미소간극 분리된 경우의 영향이 가장 커다. $\circled2$ 섬락전압 감소가 크게 되는 금속 파티클 일수록 FOV 포화 현상은 낮은 압력 영역으로 이동된다. $\circled3$0.6[mm]이하의 비금속 파타클은 섬락전압에 그의 영향을 미치지 않는다.

• 한국표면공학회지
• /
• 제38권3호
• /
• pp.89-94
• /
• 2005

We investigate the reaction stability of cobalt and nickel with side-wall materials of $SiO_2\;and\;Si_3N_4$. We deposited 15nm-Co and 15nm-Ni on $SiO_2(200nm)/p-type$ Si(100) and $Si_3N_4(70 nm)/p-type$ Si(100). The samples were annealed at the temperatures of $700\~1100^{\circ}C$ for 40 seconds with a rapid thermal annealer. The sheet resistance, shape, and composition of the residual materials were investigated with a 4-points probe, a field emission scanning electron microscopy, and an AES depth profiling, respectively. Samples of annealed above $1000^{\circ}C$ showed the agglomeration of residual metals with maze shape and revealed extremely high sheet resistance. The Auger depth profiling showed that the $SiO_2$ substrates had no residual metallic scums after $H_2SO_4$ cleaning while $Si_3N_4$ substrates showed some metallic residuals. Therefore, the $SiO_2$ spacer may be appropriate than $Si_3N_4$ for newly proposed Co/Ni composite salicide process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.694-699
• /
• 2007

The spacer grid set is a part of a nuclear fuel assembly. The set has a spring and the spring supports the fuel rods safely. Although material nonlinearity is involved in the deformation of the spring,nonlinearity has not been considered in design of the spring. Recently a nonlinear response structural optimization method has been developed using equivalent loads. It is called nonlinear response optimization equivalent loads (NROEL). In NROEL, the external loads are teansformed to the equivalent loads (EL) for linear static analysis and linear response optimization is carried out based on the EL in a cyclic manner until the convergence criteria are satisfied. EL is the load set which generates the same response no EL. The objective function is defined by minimizing the maximum stress in the spring while is limited and the support force of the spring is larger than a certain value. The results are verified by nonlinear. ABAQUS is used for nonlinear response analysis and GENESIS is employed for linear response optimization.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1373-1376
• /
• 2008

A supporting structure for a long tube bundle of a large diameter is considered in this paper. The primary purpose of the present study is to develop a spacer grid structure for a so-called "dual cooled nuclear fuel", which has been being studied for a nuclear power uprate. The outer diameter of the fuel rod increases considerably from the conventional one. So a completely new shape of the supporting structure (spacer grid) needs to be developed. One of the challenges is to insert a supporting tube into the cross points of the grid straps. To meet a supporting performance, the load vs. displacement characteristics should be obtained. So the present study focuses on the finite element analysis technology to evaluate the characteristics through a parametric study. As a result, major influencing parameters are investigated for an optimized spacer grid design.

• 대한기계학회논문집B
• /
• 제28권8호
• /
• pp.929-936
• /
• 2004

In the present work, shape of the mixing vane in Plus7 fuel assembly has been optimized numerically using three-dimensional Reynolds-averaged Navier-Stokes analysis of flow and heat transfer. Standard $k-{\epsilon}$ model is used as a turbulence closure. The Response surface method is employed as an optimization technique. The objective function is defined as a combination of heat transfer rate and inverse of friction loss. Bend angle and base length of mixing vane are selected as design variables. Thermal-hydraulic performances for different shapes of mixing vane have been discussed, and optimum shape has been obtained as a function of weighting factor in the objective function.

• 한국유체기계학회 논문집
• /
• 제12권4호
• /
• pp.7-13
• /
• 2009

The purposes of present work are to analyze the convective heat transfer with three-dimensional Reynolds-averaged Navier-Stokes analysis, and to optimize shape of the mixing vane using the analysis results. Response surface method is employed as an optimization technique. The objective function is defined as a combination of inverse of heat transfer rate and friction loss. Two bend angles of mixing vane are selected as design variables. Thermal-hydraulic performances have been discussed and optimum shape has been obtained as a function of weighting factor in the objective function. The results show that the optimized geometry improves the heat transfer performance far downstream of the mixing vane.

• 한국전산유체공학회지
• /
• 제14권2호
• /
• pp.1-8
• /
• 2009

The purposes of present work are to analyze the convective heat transfer with three-dimensional Reynolds-averaged Navier-Stokes analysis, and to optimize shape of the mixing vane taken tolerance into consideration by using the analysis results. Response surface method is employed as an optimization technique. The objective function is defined as a combination of heat transfer rate and inverse of pressure drop. Two bend angles of mixing vane are selected as design variables. Thermal-hydraulic performances have been discussed and optimum shape has been obtained as a function of weighting factor in the objective function. The results show that the optimized geometry improves the heat transfer performance far downstream of the mixing vane.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.731-736
• /
• 2000

An optimal design method is adopted for a spacer grid in nuclear power plant. It is made of punched sheet metal process, functioning as springs and dimples supporting fuel rods. For stress analysis of the assembled fuel rod support, a typical cell out of the repeated pattern in the assembly is modeled using 4-node shell elements. A commercial code, ABAQUS, is used for detailed analysis of contacting phenomena with friction. For the optimization, design varibles are taken from geometric parameters representing the shape of the bent leaf spring part and mating contact region with fuel rod. Objective function is considered in relation to mechanical functions and durability. Maximum yon Mises stress is considered in relation to constrained contact stress.

• 한국균학회지
• /
• 제45권2호
• /
• pp.107-113
• /
• 2017

Aphanoascus fulvescens KNU16-343 was isolated from crop field soil and identified based on morphological and molecular characteristics. The shape and size of conidia and conidiophores, as well as the internal transcribed spacer region of rDNA, confirmed that the isolate was A. fulvescens. This is the first report of this fungal species in Korea.