• Nuclear Engineering and Technology
• /
• 제28권2호
• /
• pp.162-174
• /
• 1996

서로 다른 지지격자들이 인접한 6$\times$6 핵연료 봉다발부수로내에서 국부 수력특성인자들을 레이저 유속 측정 장치인 LDV(Laser Doppler Velocimeter)를 이용하여 측정하였다. 6$\times$6 봉다발은 서로 다른 지지격자를 가진 3$\times$6 봉다발이 서로 인접하여 이룬 형상이다. 본 연구에서는 다른 형상과 다른 수력저항을 갖는 지지격자간들의 열수력적 상호작용을 규명하는데 그 목적이 있다. LDV를 이용하여 축방향 및 횡방향 속도, 난류강도 등의 측정 인자들을 측정하였다. 또한 압력강하를 측정하여 지지격자의 손실계수와 봉다발의 마찰계수를 구하였다. 수력실험결과에 근거하여 지지격자에 기인된 열혼합현상에 관한 것을 연구하였다. DNB의 정성적인 기준이라고 할 수 있는 swirl인자를 정의하고 횡방향속도 실험인자로부터 구하였다.

• Nuclear Engineering and Technology
• /
• 제25권3호
• /
• pp.381-393
• /
• 1993

이 논문은 하강하는 물의 막과 상승하는 공기유동으로 구성된 수직 다봉채널내서의 역유동 플러딩에 관한 실험결과를 발표한 것이다. 특히 다봉속에 혼합깃이 있는 것과 없는 스페이서 그릿 및 블럭키지가 프러딩의 거동에 미치는 영향이 조사되었다. 시험부에는 5$\times$5 지르칼로이관속이 사용되었다. 플러딩에 관한 전의 해석적 모델과 실험적 상관식들을 본 실험결과와 비교한즉 기존의 모델과 상관식들이 매우 높은 플러딩 곡선을 예측함이 발혀졌다. 스페이서 그릿은 이것이 없는 봉속과 비교하면 낮은 플러딩 공기유량을 나타낸다. 그러나 혼합깃이 있는 스페이서 그릿은 이것이 없는 스페이서 그릿에 비하여 높은 플러딩 공기유량이 요구된다. 블럭키지를 가진 봉속은 더욱더 높은 플러딩 공기유량을 갖는다. 세가지 형식의 시험봉 속에 대한 실험적 플러딩 상관식이 얻어졌다.

• 한국소음진동공학회논문집
• /
• 제13권5호
• /
• pp.384-392
• /
• 2003

The fuel rods in the Pressurized water reactor are continuously supported by a spring system called a spacer grid which is one of the main structural components for the fuel rod cluster(fuel assembly). The fuel rods vibrate within the reactor due to coolant flow. Since the vibration, which is called flow-induced vibration(FIV) can wear away the surface of the fuel rod, it is important to understand it's vibration characteristics. In this paper, the vibration analyses and the tests for the dummy rods supported by New Doublet(ND) spacer grids are described. A new FE model which reflects the contact area between the rod and ND spacer grid spring is developed to replace the previous one by which a good agreement could not be obtained with the vibration test. The natural frequency and mode shape calculated by both the Previous FE model and the new one are compared with those of experiment for a single-spanned rod supported by two ND spacer grids. The results of the new model showed good agreement with the experiment compared with those of previous model. In addition. the new FE model is applied to the vibration analysis for the dummy rod of 2.189 mm tall continuously supported by five ND spacer grids. It is also obtained that the analysis results of the new FE model well agreed to experiment ones as the single-spanned rod.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1216-1221
• /
• 2002

The fuel rods in the pressurized water reactor are continuously supported by a spring system called a spacer grid which is one of the main structural components for the fuel rod cluster (fuel assembly). The fuel rods are vibrating within the reactor due to coolant flow. Since the vibration, what is called flow-induced vibration(FIV), can wear away the surface of the fuel rod, it is important to understand the vibration characteristics of it. In this paper, the vibration analyses and the tests for the dummy rods supported by New Doublet(ND) spacer grids are described. A new FE model which reflects the contact area between the rod and ND spacer grid spring is developed to replace the previous one by which a good agreement could not be obtained with the vibration test. The natural frequency and mode shape calculated by both the previous FE model and the new one are compared with those of experiment fur a single-spanned rod supported by two ND spacer grids. The results by the new model show good agreement to experiment as compared with the ones by previous model. In addition, the new FE model is applied to the vibration analysis fur the dummy rod of 2.19 m tall continuously supported by five ND spacer grids. It is also obtained that the analysis results by the new FE model well agree to experiment ones as the single-spanned rod.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.639-646
• /
• 2000

Estimation for the vibration behavior of a nuclear fuel rod with its supporting structure called spacer grid has been made by the both of experimental and analytical methods in order to compare the supporting performance of two kinds of the spacer grids which have been newly developed. For the analytical method the fuel rod was modeled as a beam continuously supported by the springs of the spacer grid, and ABAQUS computer code was utilized. After a modal testing was performed for the fuel rod supported by five spacer grids, two results has been compared to justify and compensate the both methods. It has been found that the spring design of the spacer grid could give significant effect to natural frequency and vibration amplitude of the fuel rod.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.501-506
• /
• 1997

This paper presents the hydraulic characteristics measured by using LDV(Laser Doppler Velocimetry) in subchannels of a HANARO, KAERI research reactor, fuel bundle. The fuel bundle consists of 18 axially finned rods with 3 spacer grids, which are arranged in cylindrical configuration. The effects of the spacer grids on the turbulent flow were investigated by the experimental results. Pressure drops fer each component of the fuel bundle were measured, and the friction factors of fuel bundle and loss coefficients for the spacer grids were estimated from the measured pressure drops. Implications regard ins the turbulent thermal mixing were discussed. Vibration test results measured by using laser vibrometer were presented.

• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.93-100
• /
• 2005

The top and bottom nozzles of PWR fuel assembly are connected by guide thimbles and an instrumentation tube that are connected with spacer grids. The fuel rods are inserted into the each cell of spacer grids. The loads acting on the fuel assembly are transmitted to the guide thimbles through the flow plate of top nozzle The axial loads applied to the fuel assembly are not equally distributed among the guide thimble due to the geometry of the top nozzle flow plate and spacer grid. In this study, the load concentration factors for the $17\times17$ fuel assembly were calculated. The analytical model fur the calculation of the load concentration factor of top nozzle flow plate was developed using ANSYS 5.6. The finite element analyses were performed using the model composed of top nozzle, guide thimble, and spacer grid. And, the analysis results were compared with the test results.

• 대한기계학회논문집A
• /
• 제27권3호
• /
• pp.424-431
• /
• 2003

The spacer grid is one of the main structural components in the fuel assembly, which supports the fuel rods and maintains coolable geometry from an external load. A vibration test and a finite element analysis using ABAQUS on a dummy fuel rod continuously supported by Optimized H type(OHT) and New Doublet (ND) spacer grids arc performed to obtain the vibration characteristics such as natural frequencies and mode shapes an(1 to verify a finite element model. The results from the test and the finite element analysis are compared by modal assurance criteria (MAC) values. It is resulted that MACs for the first, the third and the fifth mode shapes are relatively good as compared with those of the second an(1 fourth ones. The natural frequency differences between two methods as well as the mode comparison results for the rod with OHT spacer grid are better than those with ND spacer grid. It is judged that the FE model for the ND spacer grid spring should be modified to consider the long contact length which actually happen when the spring supports the rod.

• Nuclear Engineering and Technology
• /
• 제24권3호
• /
• pp.263-273
• /
• 1992

핵연료 집합체의 속도분포, 압력강하는 열수력 설계와 안전해석에 중요하다. 본 실험적 연구의 목적은 봉다발 지지 격자 하류에서의 수력학적 혼합을 고찰하는데 있다. 이 연구에서 가압경수로형 5X5 봉다발 부수로의 상세한 수력학적 특성들을 1차익 He-Ne LDV를 이용하여 측정하였다. 축방향 유속, 난류강도와 압력강하를 주로 측정하였고 LDV의 정렬을 조정하여 측방향의 유속, 난류강도, Reynolds 전단응력 등도 역시 측정하였다. 봉다발의 마찰계수와 지지 격자의 손실계수는 측정된 압력 강하로부터 평가하였다. 서로 다른 종류의 지지 격자의 수력학적 혼합성능을 이웃하는 부수로 간에서의 난류 횡류 혼합률을 예측함으로써 고찰할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.860-866
• /
• 2022

An accurate prediction of the pressure drop along the flow paths is crucial in the design of advanced passive systems cooled by heavy liquid metal coolants. To date, a generic pressure drop correlation over spacer grids by Rehme has been applied extensively, which was obtained from substantial experimental data with multiple types of components. However, a few experimental studies have reported that the correlation may give large discrepancies. To provide a more reliable correlation for ring-type spacer grids, the current numerical study aims at figuring out the most critical factor among four hypothetical parameters, namely the flow area blockage ratio, number of fuel rods, type of fluid, and thickness of the spacer grid in the flow direction. Through a set of computational fluid dynamics simulations, we observed that the flow area blockage ratio dominantly influences the pressure loss characteristics, and thus its dependence should be more emphasized, whereas the other parameters have little impact. Hence, we suggest a new correlation for the drag coefficient as C_B = C_ν,m/ε^2.7, where C_ν,m is formulated by a nonlinear fit of simulation data such that C_ν,m = -11.33 ln(0.02 ln(Re_b)).