• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.52.1-52.1
• /
• 2018

We investigate initial Fe/O enhancements for 44 large gradual solar energetic particles events from 2010 to 2014 and examine the associations of the Fe/O enhancements with the structures of the heliospheric current sheet (HCS). For this study, we use STEREO SIT Fe and O data in 0.32-0.45 MeV channel as well as ACE ULEIS Fe and O data in 0.32-0.64 MeV channel. We determine 1) the magnetic polarities of the SEP source regions using the potential field source surface (PFSS) model of the coronal field and 2) the spacecraft magnetic footpoints with Parker spiral approximation of interplanetary magnetic field using the in-situ measurements of STEREO and ACE. We find that 29 out of 44 events have initial Fe/O enhanced more than 5 times of the typical gradual event values. In the 6 events, the enhancements are simultaneously observed by two spacecraft. There is a tendency that the high Fe/O enhancements are observed near SEP source regions. It is also noted that the Fe/O enhancements are associated with the polarity of the magnetic footpoints. The high Fe/O enhancements are usually observed where their footpoints lie in the same polarity regions of SEP sources rather than the opposite polarity regions. Although Fe/O enhancements could be due to a transport effect and/or a flare contribution, our result implies that the structure of HCS is likely to affect particle propagations in the interplanetary space.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.10
• /
• pp.875-887
• /
• 2015

The optimal layout design is used in the development of various areas of industry. In the field of space systems, components must be placed properly in the limited space of spacecraft by considering mechanical, thermal and electrical interfaces. When applying optimal layout design, a proper, even ideal placement of components is possible in the limited space of a satellite platform. Through the optimal placement design, the minimized moment of inertia enhances efficient attitude control, rapid maneuver and mission performance of the satellite. This paper proposes 3D optimal layout design that minimizes the spacecraft's moment of inertia and effect of thermal dissipation between inner components as well as interference between inner components based on a cubic-structure satellite platform. This study proposes the new genetic algorithm for 3D optimal layout design of the satellite platform.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.60-64
• /
• 2005

STSAT-2 will demonstrate the scientific mission(acquisition of brightness temperature of the earth at 23.8 GHz and 37 GHz) and spacecraft technologies(laser ranging, frame-type satellite structure, Dual-head star tracker, CCD sun sensor, pulsed plasma thruster, etc.). In this paper STSAT-2 satellite system is described. It includes the definition of the system and the overview of payloads and BUS.

• Advances in aircraft and spacecraft science
• /
• v.1 no.3
• /
• pp.253-271
• /
• 2014

A linearised buckling analysis of thin-walled beams is addressed in this paper. Beam theories formulated according to a unified approach are presented. The displacement unknown variables on the cross-section of the beam are approximated via Mac Laurin's polynomials. The governing differential equations and the boundary conditions are derived in terms of a fundamental nucleo that does not depend upon the expansion order. Classical beam theories such as Euler-Bernoulli's and Timoshenko's can be retrieved as particular cases. Slender and deep beams are investigated. Flexural, torsional and mixed buckling modes are considered. Results are assessed toward three-dimensional finite element solutions. The numerical investigations show that classical and lower-order theories are accurate for flexural buckling modes of slender beams only. When deep beams or torsional buckling modes are considered, higher-order theories are required.

• Advances in aircraft and spacecraft science
• /
• v.3 no.4
• /
• pp.503-521
• /
• 2016

Variances in turbomachinery blades caused by manufacturing, operation or regeneration can result in modified structural behavior. In this work, the scatter of geometrical and material properties of a turbine blade and its influence on structure performance is discussed. In particular, the vibration characteristics and the lifetime of a turbine blade are evaluated. Geometrical variances of the surface of the blades are described using the principal component analysis. The scatter in material properties is considered by 16 varying material parameters. Maximum vibration amplitudes and the number of load cycles the turbine blade can withstand are analyzed by finite element simulations incorporating probabilistic principles. The probabilistic simulations demonstrate that both geometrical and material variances have a significant influence on the scatter of vibration amplitude and lifetime. Dependencies are quantified and correlations between varied input parameters and the structural performance of the blade are detected.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.13-18
• /
• 2001

This paper deals with finite element analysis for free vibration and forced sine vibration of Ka- and Ku- bend antenna structures using MSC/PATRAN/NASTRAN. The structures are designed to satisfy minimum resonance frequency requirement in order to decouple the dynamic interaction of the satellite with the spacecraft bus structure. From the forced sinusoidal vibration, we have observed output acceleration versus input in X-,Y- and Z- direction, based on base excitation using large mass method. The results of finite elements analysis can be used as the reference data for the experimental test of satellite antenna, resulting in the reduction of cost and time by predicting and complementing experimental data.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.99-104
• /
• 2001

Thermally induced vibration response of solar array is investigated. The solar array model consists of composite thin walled beam and solar blanket, spreader bar. The composite thin walled beam incorporates a number of nonclassical effects of transverse shear, primary and secondary warping, rotary inertia and anisotropy of constituent materials. The solar blanket is a membrane subjected to uniform tension in the z direction. The spreader bar is a rigid member. A coupled thermal structure analysis that includes the effects of structural deformations on heating and temperature gradient is investigated. A stability criterion given in parameters for establishes the conditions for thermal flutter.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.2
• /
• pp.67-73
• /
• 2004

Some of Spacecraft's structures are flexible so that a certain expected disturbance can easily excite a low frequency vibration on these structures, having very low natural damping. Such vibration will degrade the performance of the system, which should to be kept in a specific shape or attitude against the undesired vibration. In this paper, LQG/LTR controller is developed using an additional dynamic model to increase the performance of the frequency responses at low frequency area. This study presents that the LQG/LTR design was an effective controller for the flexible structure.

• Journal of computational fluids engineering
• /
• v.12 no.3
• /
• pp.62-68
• /
• 2007

A conceptual thermal design is performed for the optical payload system of a geostationary satellite. The optical payload considered in this paper is GOCI(Geostationary Ocean Color Imager) of COMS of Korea. The radiative thermal control system is employed in order to expect a small thermal gradient in the telescope structure of GOCl. Two design margins are applied to the dedicated radiator dimensioning, and three kinds of configuration to the heater power sizing. A Monte-Carlo ray tracing method and a network analysis method are utilized to calculate radiative couplings and thermal responses respectively. At the level of conceptual design, sizing thresholds are presented for the radiator and heater on the purpose of determining the mass and power budget of the spacecraft.

• Advances in aircraft and spacecraft science
• /
• v.1 no.1
• /
• pp.93-123
• /
• 2014

A variational asymptotic composite beam model has been developed for thermoelastic analysis. Composite beams, including sandwich structure and laminates, under different boundary conditions are examined. Previously developed beam model, which is based on variational-asymptotic method, is extended to incorporate temperature-dependent materials experiencing large temperature changes. The recovery relations have been derived so that the temperatures, heat fluxes, stresses, and strains can be recovered over the cross-section. The present theory is implemented into the computer program VABS (Variational Asymptotic Beam Sectional analysis). Numerical results are compared with the 3D analysis for the purpose of demonstrating advantages of the present theory and use of VABS.