• 제목/요약/키워드: SpacePropulsion system

검색결과 354건 처리시간 0.03초

Development of Block type Inlet Distortion Simulating Device for Gas Turbine Engine Inlet Distortion Test

  • Lee, Kyung-Jae;Lee, Bo-Hwa;Kang, Sang-Hun;Jung, Jae-Hong;Yang, Soo-Seok;Lee, Dae-Sung;Kwak, Jae-Su
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제8권2호
    • /
    • pp.121-125
    • /
    • 2007
  • In late 1960's, engineers of the engine manufacturer experienced that the distortion of inlet flow of turbofan and turbojet engine could cause the surge in compressor and affect overall engine operational performance, which result in the deterioration of stability of the engine. In this study, block type of inlet distortion simulating device has been developed in order to investigate the effect of inlet distortion on the deterioration of overall engine operational performance. The inlet distortion simulating device was installed in front of engine inlet in order to simulate distortion of inlet flow. The degree of inlet distortion was measured by rakes installed upstream the inlet distortion simulating device and between the engine inlet and inlet distortion simulating device. Before applying the inlet distortion simulating device to real engine, preliminary tests were performed with a simulated engine in order to verify the degree of inlet distortion by the device. Preliminary inlet distortion tests were performed in Altitude Engine Test Facility(AETF) of Korea Aerospace Research Institute(KARI) and results showed that the inlet distortion simulating device could be used in simulating various inlet distortion cases.

공기 불요 연료전지 동력 시스템 (Air-independent Fuel Cell Power System)

  • 김태규
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.331-334
    • /
    • 2009
  • 본 연구에서는 우주 및 수중 동력원을 위한 연료전지 기반 공기 불요 추진 시스템을 개발하였다. 공기 불요 동력 시스템을 위해 과산화수소를 산화제로 선택하였고, 촉매 분해 반응을 통해 산소와 물을 발생하였다. 순수한 산소는 연료전지에 공급되고, 물은 분리한 후 저장된다. 본 연구에서는 고체 상태의 수소화붕소나트륨을 수소원으로 사용하였고, 촉매 가수분해 반응을 통해 순수한 수소를 발생할 수 있었다. 연료전지 기반 공기 불요 동력 시스템을 검증하기 위해 연료전지 시스템을 구축하였고 다양한 조건에서 평가를 수행하였다.

  • PDF

최적 박용엔진 선정을 위한 지식기반시스템 (Knowledge-Based System for Optimum Propulsion Engine Selection of Ships)

  • 이동곤;이경호;이규열;이창억
    • 대한산업공학회지
    • /
    • 제19권3호
    • /
    • pp.3-10
    • /
    • 1993
  • The main propulsion system may be the most complicated of the shipboard systems. Many factors such as fuel economy, weight, space, first cost, reliability, vibration and noise must be considered when selecting the prime mover of the main propulsion system for ships. An expert system is a computer program that represents and reasons with knowledge of some specialist subject with a view to solving problems or giving advice. Recently, it is being developed increasingly with wider applications in many industries. This paper describes development of knowledge-based system for main engine selection of ships using general purpose expert system development tool, Nexpert Object. Developed system is consist of ship performance estimation module such as resistance and propulsion, data base for main engine, knowledge base for main engine selection in Nexpert Object and graphic user interface.

  • PDF

우주진공환경에서의 마이크로 추진 (Micro Propulsion under High Altitude Space Environments)

  • 정성철;허환일
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.405-408
    • /
    • 2008
  • From the previous researches about flow characteristic of micro-nozzle, we found that viscosity and back pressure induced heavy losses in micro nozzle. To overcome thess losses, we began to study new conceptual micro propulsion system that is thermal transpiration based micro propulsion system. It has no moving parts and can pump the gaseous propellant by temperature gradient only (cold to hot). Most of previous research on thermal transpiration is in its early stage and mainly studied for application to small vacuum facility or gas chromatography in ambient condition using nanoporous material like aerogel. In this study, we focus on basic research of propulsion system based on thermal transpiration using polyimide material in vacuum conditions.

  • PDF

소형 연료전지 무인기의 전기추진시스템용 전력원 모델링 및 시뮬레이션 (A Electric Power Source Modeling and Simulation for Electric Propulsion Systems of a Fuel Cell Powered Small UAV)

  • 이보화;박부민;김춘택;김성욱;양수석;안석민
    • 한국항공우주학회지
    • /
    • 제39권10호
    • /
    • pp.959-965
    • /
    • 2011
  • 본 논문에서는 소형 무인기의 전기추진 시스템에 대한 모델링 및 전력 시뮬레이션에 관하여 기술하였다. 각 전력원 모델링 및 시뮬레이션을 위해 Matlab/Simulink를 사용하였고, 연료전지와 배터리를 주 전력원으로 사용하는 200 W급 전기추진 시스템에 대하여 4시간 30분의 비행 시험결과와 시뮬레이션 한 결과를 비교하였다. 그 결과, 시뮬레이션은 각 전력원의 성능 및 동특성을 적절히 모사하였고, 이를 통해 다른 급의 전기추진 시스템에 대한 전력특성변화를 예측하는 도구로 활용 가능함을 알 수 있었다.

전기로 추진되는 일반 프로펠러 항공기의 초기 사이징 (Initial Sizing of General Aviation Aircraft Propelled by Electric Propulsion system)

  • 한혜선;신교식;박홍주;황호연;남태우
    • 한국항공우주학회지
    • /
    • 제41권5호
    • /
    • pp.391-403
    • /
    • 2013
  • 전기 추진 프로펠러 항공기는 기존의 제트엔진으로부터 나오는 유해한 배기가스로 인한 환경적 우려와 국가 에너지 안보 차원에서 새로운 관심을 받고 있다. 그러나 전통적인 항공기 사이징 방법들은 여러 종류의 에너지원과 동력 시스템을 사용하는 전기 추진 항공기에 바로 적용될 수 없다. 본 연구에서는 일반화된 동력기반 사이징 기법에 기초한 전기 추진 항공기 사이징의 실제 예를 제시하였다. 여기서 일반 항공기는 프로펠러, 고온초전도모터, 수소가 연료로 사용되는 연료전지, 동력 조절 장치로 구성되는 전기 추진시스템에 의해 구동된다. 기술 향상의 영향을 평가하기 위해 전기 구성품들의 두 가지 다른 기술 구성을 가정하여 항공기 사이징을 수행하였고, 전형적인 형태의 기준 항공기와 사이징 결과를 비교하였다.

발사체 추진제 탱크 수위 측정 및 제어 시스템 기초연구 (Fundamental Research on the Measurement and Control System of Level Sensor for Launch Vehicle Propellant Tanks)

  • 신동순;한상엽;조인현;이응신
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.393-396
    • /
    • 2008
  • Propellant consumption control for space launch vehicle can be achieved by propellant utilization system (PUS) and tank depletion system (TDS). In the course of developing new space launch vehicles, the main target of design is on reducing of space launch vehicle weight, which results in increasing both specific impulse and payload weight. The weights of space launch vehicles are generally allocated to structure, propulsion system, and propellants loaded. The quantity of propellants filled in propellant tanks may be estimated with the propellants actually consumed by propulsion system to complete its mission and the propellants left on-board at the time of engine shut-off. To minimize the remaining quantity of propellants on-board the supplying propellants' O/F ratio should be controlled from the certain time before engine shutdown. To control an O/F ratio, a control system, which accurately measures and compares the remainder of propellants in tanks and pipes, should be needed. This paper solely dedicates its contents to explore the merits and demerits of various level sensor, which is one of the important elements for PUS and TDS, and the transmission and control of signals within space launch vehicle.

  • PDF

Performance of Contra-Rotating Propellers for Stratospheric Airships

  • Tang, Zhihao;Liu, Peiqing;Sun, Jingwei;Chen, Yaxi;Guo, Hao;Li, Guangchao
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제16권4호
    • /
    • pp.485-492
    • /
    • 2015
  • Small advance ratio and low Reynolds number of stratospheric propulsion system bring lots of challenges to the design of propellers. Contra-rotating propeller configuration is proposed to improve the propulsion efficiency. In this paper, the feasibility of contra-rotating propeller for stratospheric airship has been assessed and its performance has been investigated by wind tunnel tests. The experimental results indicate, at relatively low Reynolds number, although the advance ratio is fixed, the performance of propellers is different with variation of Reynolds number. Moreover, at the same Reynolds number, the efficiency of contra-rotating propeller achieved appears to be a few percent greater than that for a standard conventional propulsion system. It can be concluded that contra-rotating propellers would be an efficient means to improve the performance of stratospheric airship propulsion system.

저궤도 관측위성용 구조 및 열 개발모델 추진시스템의 설계 및 제작 (Design and Integration of STM Propulsion System for LEO Observation Satellite Development)

  • 김정수;이균호;한조영;장기원;최진철
    • 한국항공우주학회지
    • /
    • 제31권8호
    • /
    • pp.115-124
    • /
    • 2003
  • 극한의 우주공간에서 인공위성의 정상적인 성능을 보장하기 위해 일반적으로 여러 단계의 시험용 위성모델이 개발된다. 시험모델을 통해 비행모델(FM)의 설계/해석의 타당성을 검증하고, 변경사항을 최정 설계에 반영함으로써 인공위성 성능의 신뢰도를 향상시킬 수 있는 장점이 있다. 현재 개발 중인 다목적실용위성은 구조 및 열 개발모델(STM)의 제작/시험을 마친 상태이다. 본 논문에서는 다목적 실용위성의 모듈 중 하나인 추진시스템의 구조 및 열 개발모델(STM)의 설계/해석 및 조립에 관하여 기술하였다.

이원추진제 추진계의 추진제 충전 해석 프로그램 (A Propellant Loading Analysis Program of Bipropellant Propulsion System)

  • 채종원;한조영;유명종
    • 한국항공우주학회지
    • /
    • 제37권10호
    • /
    • pp.1048-1053
    • /
    • 2009
  • 액체 추진제 안의 헬륨과 얼리지 안의 헬륨에 질량보존법칙을 적용하여 추진제 탱크의 평형압력을 구하는 간단하고 직관적인 방법을 제안하고, 이를 이용하여 추진제 충전 해석 프로그램을 개발하였고 기존의 참고자료와 비교하여, 검증하였다. 또한 개발된 프로그램을 현재 개발 중인 통신해양기상위성의 자료와 비교하였고, 다음 정지궤도 복합위성의 추진계 기술개발에 사용하고자 한다.