• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.274-277
• /
• 1999

The paper describes a implementation of space vector pulse-width modulation (SVPWM) voltage source inverter using Field Programmable Gate Array(FPGA) for a induction motor control system. The implemented chip is included logic circuits for SVPWM, dead time compensation and speed detection using Quick Logic, QL16X24B. The maximum operating frequency and delay time can be set to 110MHz and 6 nsec. The designed FPGA for SVPWM can be incorporated with a digital signal processing to provide a simple and effective solution for high performance voltage source inverter drives. Simulation and Implementation results are shown to verify the usefulness of FPGA as a Application Specific Integrated Circuit(ASIC) in power electronics applications

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.350-353
• /
• 1999

In this paper, a new simple control method for active power filter which can realized the complete compensation of the harmonic currents is proposed. In the proposed scheme, a compensating current reference generator employing lossless resonato implemented by a DSP(Digital Signal Processor) is introduced. Deadbeat control is employed to contro the active power filter. The switching pulse width based SVM(Space Vector Modulation) is adopted so that the current of active power filter is been exactly equal to its reference at the next sampling instant. To compensate the computation delay of digital controller, the prediction of current is achieved by the current observer with deadbeat response.

• Journal of Power Electronics
• /
• v.10 no.1
• /
• pp.65-71
• /
• 2010

This paper presents the design and implementation of voltage source inverter type SVPWM based speed control of an induction motor using a fuzzy PI controller. This scheme enables us to adjust the speed of the motor by controlling the frequency and amplitude of the stator voltage; the ratio of the stator voltage to the frequency should be kept constant. A model of the fuzzy control system is implemented in real time with a Xilinx FPGA XC3S 400E. It is introduced to maintain a constant speed to when the load varies.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.1-5
• /
• 2003

The random pulse width modulation(RPWM) on the noise and vibration abatement in inverter-fed induction motor drive is presented. This paper describes a RPWM technique based on space vector PWM strategy for shaping the switching noise spectrum in such a way it can merge with the natural system noise. To verify the validity of the proposed RPWM scheme, the experiment based on the TMS320 C3l microprocessor was executed. Finally, the simulation and experimental results will be given to demonstrate the effectiveness of the proposed RPWM technique.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.316-319
• /
• 1998

RPWM(Random Pulse Width Modulation) is a switching technique to spread the voltage and current harmonics on the wide frequency area. Using randomly changed switching frequency of the inverter, the power spectrum of the electromagnetic acoustic noise cab be spread to the wide-band area. The wide-band noise is much more comfortable and less annoying than the narrow-band one. So RPWM have been attracting an interest as an excellent method for the reduction of acoustic noise on the inverter drive system. In this paper a new RPPWM (Random Position PWM) is proposed and implemented. Each of three pulses is located randomly in each switching interval. Along with the randomization of PWM pulses, the space vector modulation is executed in the C167 microcontroller also. The experimental results show that the voltage and current harmonics were spread to wide band area and that the audible switching noise was reduced by proposed RPPWM method.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.174-178
• /
• 2002

This paper describes that single-sided linear induction motor is controlled by space vector pulse width modulation. Furthermore, it shows that the speed and thrust is adulated as give a each step reference by controller.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.263-264
• /
• 2013

본 논문에는 전동기 구동 가전제품에서 전해 커패시터 없이 높은 역률을 얻기 위한 제어 방법을 제안한다. 제안한 시스템은 단상 다이오드 정류기, 필름 커패시터, 3상 인버터, AC 전동기로 구성되어 있다. 높은 역률을 얻기 위해서, 이 논문은 계통 전압의 위상에 대해서 q축 전류를 지연하는 방법을 제안한다. 이 논문은 벡터제어와 Space Vector Pulse Width Modulation (SVPWM)방법을 사용하였다. 시뮬레이션 결과는 PSIM을 통하여 확인하였고, 제안한 방법의 효율을 보여주고 있다.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1114-1123
• /
• 2017

A linear permanent-magnet vernier (LPMV) motor has magnets and windings in the short mover, which is very suitable for long stroke applications. This paper proposed a new field oriented control with space vector pulse width modulation for the LPMV motor, which considers loss minimization. First, the topology of the LPMV motor is briefly presented. Then, the mathematical model is derived, and the mover field oriented control strategy is proposed. Also, the loss analysis is performed. Finally, the simulated and experimental results are given, verifying the feasibility and effectiveness of the proposed control strategy.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.11
• /
• pp.757-762
• /
• 2000

This paper presents a digital controller for three-phase Boost Converter. Generally, the conventional Space-Vector Pulse Width Modulation (SVPWM) have complex computation. Thereby, it should be implemented with high performance processor. In order to reduce calculation burden of the conventional SVPWM, digital controller which has a simplified SVPWM algorithm is designed in this study. A proposed digital controller consists of fuzzy pwm controller and prediction controller. In simulations and experiments, the proposed digital controller is validated.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.116-122
• /
• 2015

This paper presents a new current sharing control strategy for parallel-connected, synchronised three-phase DC-AC converters employing space vector pulse width modulation (SVPWM) without current sharing reactors. Unlike conventional control methods, the proposed method breaks the paths of the circulating current by dividing the switching cycle evenly between parallel connected equally rated converters. Accordingly, any inter-module reactors or circulating current control will be redundant, leading to reductions in system costs, size, and control algorithm complexity. Each converter in the new scheme employs a synchronous dq current regulator that uses only local information to attain a desired converter current. A stability analysis of the current controller is included together with a simulation of the converter and load current waveforms. Experimental results from a 2.5kVA test rig are included to verify the proposed control method.