• Wind and Structures
• /
• 제18권3호
• /
• pp.215-233
• /
• 2014

This paper presents a method to extract flutter derivatives of bridge decks based on a combination of the computational fluid dynamics (CFD), system simulations and system identifications. The incompressible solver adopts an Arbitrary Lagrangian-Eulerian (ALE) formulation with the finite volume discretization in space. The imposed sectional motion in heaving or pitching relies on exponential time series as input, with aerodynamic forces time histories acting on the section evaluated as output. System identifications are carried out to fit coefficients of the inputs and outputs of ARMA models, as to establish discrete-time aerodynamic models. System simulations of the established models are then performed as to obtain the lift and moment exerting on the sections to a sinusoidal displacement. It follows that flutter derivatives are identified. The present approaches are applied to a hexagon thin plate and a real bridge deck. The results are compared to the Theodorsen closed-form solution and those from wind tunnel tests. Satisfactory agreements are observed.

• Journal of applied mathematics & informatics
• /
• 제29권3_4호
• /
• pp.813-829
• /
• 2011

In this article, we present a numerical scheme for solving singularly perturbed (i.e. highest -order derivative term multiplied by small parameter) Burgers-Huxley equation with appropriate initial and boundary conditions. Most of the traditional methods fail to capture the effect of layer behavior when small parameter tends to zero. The presence of perturbation parameter and nonlinearity in the problem leads to severe difficulties in the solution approximation. To overcome such difficulties the present numerical scheme is constructed. In construction of the numerical scheme, the first step is the dicretization of the time variable using forward difference formula with constant step length. Then, the resulting non linear singularly perturbed semidiscrete problem is linearized using quasi-linearization process. Finally, differential quadrature method is used for space discretization. The error estimate and convergence of the numerical scheme is discussed. A set of numerical experiment is carried out in support of the developed scheme.

• 대한수학회보
• /
• 제57권1호
• /
• pp.219-244
• /
• 2020

In this paper, we approximate the solution of the coupled nonlinear Schrödinger equations by using a fully discrete finite element scheme based on the standard Galerkin method in space and implicit midpoint discretization in time. The proposed scheme guarantees the conservation of the total mass and the energy. First, a priori error estimates for the fully discrete Galerkin method is derived. Second, the existence of the approximated solution is proved by virtue of the Brouwer fixed point theorem. Moreover, the uniqueness of the solution is shown. Finally, convergence orders of the fully discrete Crank-Nicolson scheme are discussed. The end of the paper is devoted to some numerical experiments.

• 한국산업융합학회 논문집
• /
• 제12권3호
• /
• pp.149-155
• /
• 2009

A new finite element equation is derived by applying quadratic and cubic time integration scheme to the variational formulation in time-integral for the analysis of the transient elastodynamic problems to increase the numerical accuracy and stability. Emphasis is focused on methodology for cubic time integration scheme procedure which are never presented before. In this semidiscrete approximations of the field variables, the time axis is divided equally and quadratic and cubic time variation is assumed in those intervals, and space is approximated by the usual finite element discretization technique. It is found that unconditionally stable numerical results are obtained in case of the cubic time variation. Some numerical examples are given to show the versatility of the presented formulation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2471-2476
• /
• 2008

Turbulent flow and heat transfer to water at supercritical pressure flowing in vertical pipes is investigated using direct numerical simulation (DNS). A conservative space-time discretization scheme for variable-density flows at low Mach numbers is adopted in the present study to treat steep variations of fluid properties at supercritical pressure just above the thermodynamic critical point. The fluid properties at these conditions are obtained using PROPATH and used in the form of tables in the simulations. The buoyancy influence induced by strong variation of density across the pseudo-critical temperature proved to play an important role in turbulent flow and heat transfer at supercritical state. Depending on the degree of buoyancy influence, turbulent heat transfer may be enhanced or significantly deteriorated, resulting in local hot spots along the heated surface.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.666-670
• /
• 2008

The low-speed preconditioning technique is applied to solve the compressible Reynolds averaged Navier-Stokes equations for low-speed flows. The space discretization is based on Roe's flux-difference splitting with third-order-accurate MUSCL extrapolation. Time integration is performed employing a diagonal approximate factorization algorithm. The dual-time stepping has been incorporated to solve the unsteady flows. Full multigrid method is implemented to accelerate the convergence rate. To verify the algorithms several cases have been tested. Demonstrated the improvement on convergence and quality of the solution.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.116-121
• /
• 2006

Numerical simulations for dendritic growth of crystals are conducted in this study by the level set method. The effect of order of difference is tested for reinitialization error in simple problems and authors founded in case of 1st order of difference that very fine grids have to be used to minimize the error and higher order of difference is desirable to minimize the reinitialization error The 2nd and 4th order Runge-Kutta scheme in time and 3rd and 5th order of WENO schemes with Godunov scheme are applied for space discretization. Numerical results are compared with the analytical theory, phase-field method and other researcher's level set method.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.70-81
• /
• 2019

An improved three dimensional Rankine source method is developed to solve numerically water wave problems in time domain. The free surface and body surface are both represented by continuous panels rather than a discretization by isolated points. The integral of Rankine source 1/r on free surface panel is calculated analytically instead of numerical approximation. Due to the exact algorithm of Rankine source integral applied on the free surface and body surface, a space increment free surface source distribution method is developed and much smaller amount of source panels are required to cover the fluid domain surface than other numerical approximation methods. The proposed method shows a higher accuracy and efficiency compared to other numerical methods for various water wave problems.

• 한국정밀공학회지
• /
• 제12권6호
• /
• pp.128-136
• /
• 1995

The problem addressed in this paper is that of the on-line computational burden of time-optimal control laws for quick, strongly nonlinear systems like revolute robots. It will be demonstrated that a large amount of off-line computation can be substituted for most of the on-line burden in cases of time optimization with constrained inputs if differential point-to- point specifications can be relaxed to cell-to-cell transitions. These cells result from a coarse discretization of likely swaths of state space into a set of nonuniform, contiguous volumes of relatively simple shapes. The cell boundaries approximate stream surfaces of the phase fluid and surfaces of equal transit times. Once the cells have been designed, the bang- bang schedules for the inputs are determined for all likely starting cells and terminating cells. The scheduling process is completed by treating all cells into which the trajectories might unex- pectedly stray as additional starting cells. Then an efficient-to-compute control law can be based on the resulting table of optimal strategies.

• 한국항공우주학회지
• /
• 제34권9호
• /
• pp.45-52
• /
• 2006

압전재료를 사용한 복합재료 패널의 플러터 억제 방법으로서 비선형 모델을 기반으로 하는 비선형 제어기법 중의 하나인 궤환 선형화에 의한 제어방법을 소개하였다. 기존의 패널 플러터 제어기에 대한 대부분의 연구들은 선형모델을 기반으로 설계된 선형2차제어기(LQR: Linear Quadratic Regulator)였음에 비해, 본 연구에서 제안한 비선형제어기는 시스템이 갖고 있는 비선형 특성들을 모두 고려해서 설계하였다. 압전 작동기로서는 PZT를 사용하였다. 가상변위의 원리와 4절점 사각형 요소를 사용하여 이산화된 비선형 운동방정식을 유도하였으며 제어기 설계를 위해 모달 변환을 통해 상태공간에서의 비선형 연계-모달 방정식으로 변환하였다. 본 논문에서 제안한 비선형 제어기에 의한 제어 결과와 선형모델을 기반으로 한 LQR 제어결과를 Newmark 수치적분법을 통해 시간영역에서 비교하였다.