• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.92-94
• /
• 2004

This paper presents modeling of dynamic system for slot less air-cored PM linear synchronous motor using space vector PWM. The vector control requires Information about rotor position. And we can need to the Hall sensor for sampling current. In order to agree with this purpose, Digital Signal Processor(TMS320F2406A) developed for implementation of a speed Field Oriented Control.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.3
• /
• pp.670-674
• /
• 2016

The control performance of hybrid PWM inverter using a phase current measurement is presented in this paper. The hybrid PWM technique consists of space vector pulse width modulation (SVPWM) and six-step voltage control operation. The SVPWM is performed to reduce the harmonic components in the low speed region, and the six-step modulation is applied to increase the maximum speed of the IPMSM in the high speed region. Therefore, it is possible to obtain a great performance in both the low speed range and high speed range. However, the six-step modulation cannot be completely implemented, since the inverter that includes the lag-shunt sensing method has an immeasurable current region. In this paper, a quasi-six-step modulation using a modified voltage vector is proposed. The validity and usefulness of the proposed PWM technique is verified by MATLAB/Simulink and experimental results.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.4
• /
• pp.86-91
• /
• 1997

A method of detecting the three phase currents for a voltage-fed pusle width modulated(PWM) inverter is proposed, where only one current sensor is utilized on the dc-link. The proposed method has the constant sampling time by employing he modified space-vector PWM technique which generates the rearranged switching pattern to detect a phase current from ad dc-link current. Experimental results show that eh proposed scheme provides a very good detection method of three phase currents without phase current sensors. This method is very simple and has small detection errors.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.475-478
• /
• 2001

In performing the three-level SVPWM, it is nearly impossible to control the neutral-point potential exactly to the half of the dc-link voltage at all times. Therefore the inverter would produce an erroneous output voltage by this voltage unbalance. So the voltage unbalance has to be compensated in doing PWM, when the voltage unbalance occurs whether it is small or large, to make the inverter output voltage follow the reference voltage exactly the same. In this paper, a new compensating method for the neutral-point potential variation in a three-level inverter space vector PWM (SVPWM) is presented. By using the proposed method, the output voltage of the inverter can be made same as the reference voltage and thus the current and torque ripple of the inverter driven motor can be greatly improved even if the voltage unbalance is quite large. The proposed method is verified experimentally with a 3-level IGBT inverter.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.4
• /
• pp.331-338
• /
• 2005

In this paper the novel pulsewidth modulation(PWM) technique for the two-leg and four-leg two-phase inverter is proposed. The conventional space vector PWM technique for two-phase inverter was complex. The proposed PWM for two-leg inverter, which is used by sinusoidal PWM method, is simpler than the conventional SVPWU technique. Also, a simple PWM technique for four-leg two-phase inverter is proposed. Such PWM technique is based on PWM technique for two-leg inverter. Practical verification of theoretical predictions is presented to confirm the capabilities of the new techniques.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.1
• /
• pp.13-18
• /
• 1999

This paper proposes a new overmodulation stategy to give a better voltage by the full utilization of the hexagon voltage range in the space vector PWM(SVPWM) inverter. This overmodulation strategy can apply to the vector control, leading to better output torque capability in the ac motor drive system. This strategy is that in the overmodulation range, the d-axis output current is given a priority to regulate the flux well, instead the q-axis output curent is sacrificed. Therefore, the vector control even in the overmodulation PWM operation can be achieved well. For this purpose, the d-axis output voltage of a current controller to control the flux is conserved. the q-axis output voltage to control the torque is controlled to place the reference voltage vector on the hexagon boundary in case of the overmodulation. The validity of the proposed overall scheme is confirmed by simulation and experiments for a 22[kW] induction motor drive system

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.4
• /
• pp.472-476
• /
• 2012

In this paper, a sensorless control scheme for a three-phase bi-directional voltage-type PWM rectifier in wind power generation system that operates without the input AC voltage sensors (generator side) is described. The basic principles and classification of the PWM rectifier are analyzed, and then the three-phase mathematical model of the input AC voltage sensorless PWM rectifier control system is established. The proposed scheme has been developed in order to lower the cost of the three-phase PWM rectifier but still achieve excellent output voltage regulation, limited current harmonic content, and unity input power factor.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1937-1939
• /
• 1998

This paper presents a simple switching method to generate a PWM pattern mostly relevant to signle-phase three-level PWM rectifier. The adopted PWM switching pattern is performed in a manner similar to the space vector PWM method, which is popularly used in the three-phase rectifier and inverter. A set of possible voltages has been selected so that an equation with a time integral considered within a sampling period should be satisfied every sampling time. The simulation result shows that the proposed control scheme is good in some performance criteria such as unity power factor, low harmonic distortion of input current, dynamic response and voltage balancing of two series-connected DC capacitors.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.388-389
• /
• 2018

최근 차량용 인버터의 소형화 문제가 대두되고 있는 가운데, 3상 인버터의 구성품인 DC 링크 커패시터와 방열 시스템은 인버터에서 큰 부피를 차지하고 있다. DC 링크 커패시터의 부피는 커패시터에 흐르는 전류에 의해 결정되므로, 커패시터의 RMS 전류를 저감하는 것이 중요하다. 또한, 인버터의 스위칭 손실을 저감하면 방열 시스템의 크기를 줄일 수 있다. 본 논문에서는 추가적인 하드웨어 없이 PWM 방식 변경만으로 DC 링크 커패시터 RMS 전류와 스위칭 손실을 저감할 수 있는 Extended Double Carrier PWM을 소개한다. 또한, PSIM 시뮬레이션으로 이를 영구자석 동기 전동기의 구동에 적용하고, 기존에 널리 쓰이는 방식인 Space Vector PWM 및 Discontinuous PWM과 비교하여 그 특성을 살펴본다.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.497-503
• /
• 2015

This paper analyses the harmonic pollution to power grids caused by several high-power rectifiers, summarizes the requirements for rectifiers in suppressing grid-side current harmonics and optimizes a new-type of current source PWM rectifier with a hybrid switch. The rectifier with a hybrid switch boasts significant current characteristics and cost advantages in the high-power area. To further enhance the working frequency of the current source rectifier with a hybrid switch for suppressing grid-side harmonics and reducing the inductance size, this paper proposes an optimal control strategy based on space vector. It also verifies that the optimal control strategy based on space vector can reduce the total harmonic distortion of the grid-side current of the rectifier with a hybrid switch via circuit simulation and experimental results.