• Journal of the Society of Disaster Information
• /
• v.20 no.3
• /
• pp.573-583
• /
• 2024

Purpose: This study predicted the flow of chemical, biological, and radiological materials in chemical, biological, and radiological defense facilities within the base during a chemical, biological, and radiological attack based on the conditions of the facility before the existing improvement, analyzed the flow of pollutants and the human impact of toxic substances, and identified the occurrence of leakage. Method: Assuming that the simple chemical, biological, and radiological defense facility improvement plan, which reflects the characteristics of the building, has been improved to the facility standard, the flow of chemical, biological, and radiological materials in the chemical, biological, and radiological defense facility within the base was predicted in the event of a chemical, biological, and radiological attack under the same conditions, and the flow of contaminants and the impact on occupants by toxic substances were analyzed to determine spatial safety. Result: In the case of Plan 1, it was found that leakage occurred after approximately 250 seconds in spaces where existing flat-panel chemical, biological, and radiological defense facilities were not installed. In the cases of Plans 2 and 3, it was found that leakage occurred in spaces where existing flat-panel chemical, biological, and radiological defense facilities were not installed. Conclusion: n the case of plans 1, 2, and 3, it was found that airtightness was maintained because no leakage occurred in the improved plane. In the case of plan 4, airtightness was not maintained due to leakage in the space where the existing plane simple chemical, biological, and radiological protection facilities were not installed.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.421-435
• /
• 2017

Recently, due to the saturation of ground structures and the overpopulation of pipeline facilities requires to development of underground structures as an alternative to ground structures. Thus, mechanized tunnel construction of the shield TBM method has been increasing in order to prevent vibration and noise problems in construction of the NATM tunnel for the urban infrastructure construction. Tunnel construction plan for the tunnel line should be formed in a sharp curve to avoid building foundation and underground structures and it is inevitable to develop a shield TBM technology that suits the sharp curve tunnel construction. Therefore, this study is about the structural stability technology of the articulation jack, shield jack and skin plate for the shield TBM thrust in case of the mechanized tunnel construction that is a straight and sharp curve line. The construction case study and shield TBM operation principle are examined and analyzed by the theoretical approach. The torque of the cutter head, the thrust of the articulation jack and the shield jack, the amount of over cutting for curve is important respectively in shield TBM construction of straight and sharp curve line. In addition, it is very important to secure the stability of the skin plate structure to ensure the safety of the inside worker. This study examines the general structure and construction of the equipment, experimental simulation was carried out through numerical analysis to examine the main factors and structural stability of the skin plate structure. The structural stability of the skin plate was evaluated and optimizes the shape by comparing the loads of the articulation jack by selecting the virtual soil to be applied in a straight and sharp curve line construction. Since the present structure and operation method of the shield TBM type in domestic constructions are very similar, this study will help to develop the localized shield TBM technology for the new equipment and the vulnerability and stability review.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.3
• /
• pp.21-34
• /
• 2015

In this study, a reference model is constructed that provides architects or designers with sufficient information on the intelligent service facility that is essential for U-City space configuration, and for the support of enhanced design, as well as for planning activities. At the core of the reference model is comprehensive information about the intelligent service facility that plans the content of services, and the latest related information that is regularly updated. A plan is presented to take advantage of the database of list information systems in the Public Procurement Service that handles intelligent service facilities. We suggest a number of improvements by analyzing the current status of, and issues with, the goods information in the Public Procurement Service, and by conducting a simulation for the proper placement of CCTV. As the design of U-City plan has evolved from IT technology-based to smart space-based, reviews of limitations such as the lack of standards, information about the installation, and the placement of the intelligent service facility that provides U-service have been carried out. Due to the absence of relevant legislation and guidelines, however, planning activities, such as the appropriate placement of the intelligent service facility are difficult when considering efficient service provision. In addition, with the lack of information about IT technology and intelligent service facilities that can be provided to U-City planners and designers, there are a number of difficulties when establishing an optimal plan with respect to service level and budget. To solve these problems, this study presents a plan in conjunction with the goods information from the Public Procurement Service. The Public Procurement Service has already built an industry-related database of around 260,000 cases, which has been continually updated. It can be a very useful source of information about the intelligent service facility, the ever-changing U-City industry's core, and the relevant technologies. However, since providing this information is insufficient in the application process and, due to the constraints in the information disclosure process, there have been some issues in its application. Therefore, this study, by presenting an improvement plan for the linkage and application of the goods information in the Public Procurement Service, has significance for the provision of the basic framework for future U-City enhancement plans, and multi-departments' common utilization of the goods information in the Public Procurement Service.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.40-47
• /
• 2007

In this paper, we propose and analyze the Adaptive Modulation System with optimal Turbo Coded V-BLAST(Vertical-Bell-lab Layered Space-Time) technique that adopts the extrinsic information from MAP (Maximum A Posteriori) Decoder with Iterative Decoding as a priori probability in two decoding procedures of V-BLAST; the ordering and the slicing. Also, we consider and compare the Adaptive Modulation System using conventional Turbo Coded V-BLAST technique that is simply combined V-BLAST with Turbo Coding scheme and the Adaptive Modulation System using conventional Turbo Coded V-BLAST technique that is decoded by the ML (Maximum Likelihood) decoding algorithm. We observe a throughput performance and a complexity. As a result of a performance comparison of each system, it has been proved that the complexity of the proposed decoding algorithm is lower than that of the ML decoding algorithm but is higher than that of the conventional V-BLAST decoding algorithm. however, we can see that the proposed system achieves a better throughput performance than the conventional system in the whole SNR (Signal to Noise Ratio) range. And the result shows that the proposed system achieves a throughput performance close to the ML decoded system. Specifically, a simulation shows that the maximum throughput improvement in each MIMO scheme is respectively about 350 kbps, 460 kbps, and 740 kbps compared to the conventional system. It is suggested that the effect of the proposed decoding algorithm accordingly gets higher as the number of system antenna increases.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.5
• /
• pp.13-29
• /
• 2023

Urban parks are social infrastructure supporting citizens' health, quality of life, and community formation. As the proportion of urban parks that have been established for more than 20 years is increasing, the need for refurbishment to improve the physical space environment and enhance the functions of aging urban parks is increasing. Since the government's refurbishment of aging urban parks has limitations in securing financial resources and promoting attractiveness, they must be promoted through public-private partnerships. Japan, which suffered from the problem of aging urban parks, has successfully promoted several park refurbishment projects by introducing the Park-PFI through the revision of the 「Urban Park Act」 in 2017. This study examines and analyzes the characteristics of the Japan Park-PFI as an alternative to improving the quality of aging domestic urban park services through public-private partnerships and the validity of the aging urban park refurbishment projects through Park-PFI. The main findings are as follows. First, it is necessary to start discussions on introducing Japan's Park-PFI according to the domestic conditions as a means of public-private partnership to improve the service quality and diversify the functions of aging urban parks. In order to introduce Park-PFI social discussions and follow-up studies on the deterioration of urban parks. Must be conducted. The installation of private capital and profit facilities and improvements of related regulations, such as the 「Parks and Green Spaces Act」 and the 「Public Property Act」, is required. Second, it is judged that the Park-PFI project is a policy alternative that can enhance the benefits to citizens, local governments, and private operators under the premise that the need to refurbish aging urban parks is high and the location is suitable for promoting the project. As a result of a pilot application of the Park-PFI project to Seyeong Park, an aging urban park located in Bupyeong-gu, Incheon, it was analyzed to be profitable in terms of the profitability index (PI), net present value (FNPV), and internal rate of return (FIRR). It is considered possible to participate in the business sector. At the local government level, private capital is used to improve the physical space environment of aging urban parks, as well as the refurbishment of the urban parks by utilizing financial resources generated by returning a portion of the facility usage fees and profits (0.5% of annual sales) of private operators. It was found that management budgets could be secured.

• Journal of Internet Computing and Services
• /
• v.25 no.4
• /
• pp.65-72
• /
• 2024

To faithfully represent the intention of the work in the exhibition space, lighting that provides high color reproduction like natural light is required. Thus, many lighting technologies have been introduced to improve CRI, but most of them only evaluated the general color rendering index (CRI Ra), which considers eight pastel colors. Natural light provides excellent color rendering performance for all colors, including red and blue, expressed by color rendering index of R9 and R12, but most artificial lighting has the problem that color rendering performance such as R9 and R12 is significantly lower than that of natural light. Recently, lighting technology that provides CRI at the level of natural light is required to realistically express the colors of works including primary colors but related research is very insufficient. Therefore this paper proposes exhibition hall lighting that fulfills CRI with a focus on CRI Ra, R9, and R12 based on the characteristics of natural light. First reinforcement wavelength bands for improving R9 and R12 are selected through analysis of the actual measurement SPD of natural and artificial lighting. Afterward virtual SPDs with a peak wavelength within the reinforcement wavelength band are created and then SPD combination conditions that satisfy CRI Ra≥95, R9, and R12≥90 are derived through combination simulation with a commercial LED light source. Through this, after specifying two types of light sources with 405,630nm peak wavelength that had the greatest impact on the improvement of R9 and R12, the exhibition hall lighting applied with two W/C White LEDs is designed and a control Index DB of the lighting is constructed. Afterward experiments with the proposed method showed that it was possible to achieve high CRI at the level of natural light with average CRI Ra 96.5, R9 96.2, and R12 94.0 under the conditions of illuminance (300-1,000 Lux) and color temperature (3,000-5,000K).

• Cartoon and Animation Studies
• /
• s.29
• /
• pp.129-149
• /
• 2012

The purpose of this study was to investigate the clustering and Big Five Personality domains in discriminating groups by level of school-related adjustment, as experienced by Social Sims game users. Social Games are based on web that has simple rules to play in fictional time and space background. This paper is to analyze the relationships between social networks and user behaviors through the social games . In general, characteristics of social games are simple, fun and easy to play, popular to the public, and based on personal connections in reality. These features of social games make themselves different from video games with one player or MMORPG with many unspecific players. Especially Social Game show a noticeable characteristic related to social learning. The object of this research is to provide a possibility that game that its social perspective can be strengthened in social game environment and analyze whether it actually influences on problem solving of real life problems, therefore suggesting its direction of alternative play means and positive simulation game. Data was collected by administering 4 questionnaires (the short version of BFI, Satisfaction with life, Career Decision-.Making Self-.Efficacy, Depression) to the participants who were 20 people in Seoul and Daejeon. For the purposes of the data analysis, both Stepwise Discriminant analysis and Cluster analysis was employed. Neuroticism, Openness, Conscientiousness within the Big Five Personality domains were seen to be significant variables when it came to discriminating the groups. These findings indicated that the short version of the BFI may be useful in understanding for game user behaviors When it comes to cultural research, digital game takes up a significant role. We can see that from the fact that game, which has only been considered as a leisure activity or commercial means, is being actively research for its methodological, social role and function. Among digital game's several meanings, one of the most noticeable ones is the research on its critical, social participating function. According to Jame Paul gee, the most important merit of game is 'projected identity'. This means that experiences from various perspectives is possible.[1] In his recent autobiography , he described gamer as an active problem solver. In addition, Gonzalo Francesca also suggested an alternative game developing method through 'game that conveys critical messages by strengthening critical reasons'. [2] They all provided evidences showing game can be a strong academic tool. Not only does a genre called social game exist in the field of media and Social Network Game, but there are also some efforts to positively evaluate its value Through these kinds of researches, we can study how game can give positive influence along with the change in its general perception, which would eventually lead to spreading healthy game culture and enabling fresh life experience. This would better bring out the educative side of the game and become a social communicative tool. The object of this game is to provide a possibility that the social aspect can be strengthened within the game environment and analyze whether it actually influences the problem solving of real life problems. Therefore suggesting it's direction of alternative play means positive game simulation.

• Journal of Science Education
• /
• v.32 no.2
• /
• pp.1-16
• /
• 2008

The purpose of this study was to analyze about STS contents in the next generation science textbook for 10th grade according to curriculum revision 2007 and high school science textbooks focused on the Earth Science which were published according to the 7th curriculum. The contents of STS were analyzed by the STS topics of Yager(1989), Piel's standard(1981), and student activities by SATIS. The results of this study are the same as follows: 'The next generation science textbook' was shown that 20.9% is STS material amount in average by Yager's standard. 'High school science textbooks' were shown that 11.3% is STS material amount in average. Based on the STS topics by Yager's standard, most of STS content is focused on 'Relativity with local community', 'Application of science' and 'Cooperative work on real problems'. However, there is rare contents such as 'Multiple dimensions of science', 'Practice with decision-making strategies' and 'Evaluation concerned for getting and using information' in the next generation science textbook. In high school science textbooks were shown that 'Applicability of science' is the highest and 'Relativity with local community' is the next high contents. Based on the STS topics by Piel's standard, most of STS contents are focused on 'Environmental quality', 'Space research' and 'National defence' in the next generation science textbook. But high school science textbooks are focused on 'Natural resources' and 'Technology development'. The activities were analyzed by SATIS student activities. The major categories of activities included in the next generation science textbook were 'Investigation', 'Simulation' and 'Data analysis'. But, there were rare activities like 'Roleplaying', 'Research design' and 'Simulation' in high school science textbooks.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.249-261
• /
• 2020

Coastal monitoring using multiple platforms/sensors is a very important tools for accurately understanding the changes in offshore marine environment and disaster with high temporal and spatial resolutions. However, integrated observation studies using multiple platforms and sensors are insufficient, and none of them have been evaluated for efficiency and limitation of convergence. In this study, we aimed to suggest an integrated observation method with multi-remote sensing platform and sensors, and to diagnose the utility and limitation. Integrated in situ surveys were conducted using Rhodamine WT fluorescent dye to simulate various marine disasters. In September 2019, the distribution and movement of RWT dye patches were detected using satellite (Kompsat-2/3/3A, Landsat-8 OLI, Sentinel-3 OLCI and GOCI), unmanned aircraft (Mavic 2 pro and Inspire 2), and manned aircraft platforms after injecting fluorescent dye into the waters of the South Sea-Yeosu Sea. The initial patch size of the RWT dye was 2,600 ㎡ and spread to 62,000 ㎡ about 138 minutes later. The RWT patches gradually moved southwestward from the point where they were first released,similar to the pattern of tidal current flowing southwest as the tides gradually decreased. Unmanned Aerial Vehicles (UAVs) image showed highest resolution in terms of spatial and time resolution, but the coverage area was the narrowest. In the case of satellite images, the coverage area was wide, but there were some limitations compared to other platforms in terms of operability due to the long cycle of revisiting. For Sentinel-3 OLCI and GOCI, the spectral resolution and signal-to-noise ratio (SNR) were the highest, but small fluorescent dye detection was limited in terms of spatial resolution. In the case of hyperspectral sensor mounted on manned aircraft, the spectral resolution was the highest, but this was also somewhat limited in terms of operability. From this simulation approach, multi-platform integrated observation was able to confirm that time,space and spectral resolution could be significantly improved. In the future, if this study results are linked to coastal numerical models, it will be possible to predict the transport and diffusion of contaminants, and it is expected that it can contribute to improving model accuracy by using them as input and verification data of the numerical models.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.670-691
• /
• 2018

This study presents the research results of the BMT(Benchmark Model Test) simulations of the DECOVALEX-2019 project Task B. Task B named 'Fault slip modelling' is aiming at developing a numerical method to predict fault reactivation and the coupled hydro-mechanical behavior of fault. BMT scenario simulations of Task B were conducted to improve each numerical model of participating group by demonstrating the feasibility of reproducing the fault behavior induced by water injection. The BMT simulations consist of seven different conditions depending on injection pressure, fault properties and the hydro-mechanical coupling relations. TOUGH-FLAC simulator was used to reproduce the coupled hydro-mechanical process of fault slip. A coupling module to update the changes in hydrological properties and geometric features of the numerical mesh in the present study. We made modifications to the numerical model developed in Task B Step 1 to consider the changes in compressibility, Permeability and geometric features with hydraulic aperture of fault due to mechanical deformation. The effects of the storativity and transmissivity of the fault on the hydro-mechanical behavior such as the pressure distribution, injection rate, displacement and stress of the fault were examined, and the results of the previous step 1 simulation were updated using the modified numerical model. The simulation results indicate that the developed model can provide a reasonable prediction of the hydro-mechanical behavior related to fault reactivation. The numerical model will be enhanced by continuing interaction and collaboration with other research teams of DECOVALEX-2019 Task B and validated using the field experiment data in a further study.