• Journal of the Korean Institute of Rural Architecture
• /
• v.22 no.2
• /
• pp.1-8
• /
• 2020

This study is intended to derive the adaptive reuse techniques through the history and aspects of new construction, extension, repair, and other works, limited to the deep and narrow lots facing Seongan-gil and Nammun-gil in Nammun-ro 2 ga of Cheongju, the historic urban area. The results are as follows. 1) In the case of newly built reinforced concrete buildings, the central part of the top floor of the residence or all floors are opened to the open space(void) to facilitate lighting and ventilation. This is developed as a convection phenomenon due to the temperature difference from the slits between buildings, which affects the entire air flow of the block. 2) The buildings of extension and repair are composed of two-story masonry or steel frame, both the front store facing the road and the house on the back, but it looks like one because it is in contact with each other. If only a small gap between the front and rear buildings is restored to an external space or a space equipped with sun light, a small breath can be provided in lighting and ventilation. 3) The existing two-story wooden stores and houses have lost their external space due to repairs. With minimal intervention to restore the small courtyard, slits, and space under the eaves, it will not only improve lighting and ventilation, but also create a unique appearance as a segment of the elongated store.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.141-149
• /
• 1999

어느 한 계가 양수의 발산지수(Lyapunov exponent)를 가질 때 이 계는 카오스계로 분류되며 그 동특성은 예측이 불가능해 진다. 감쇠 기계계(소산계)에서는 위상공간(phase space)의 초기 부피가 시간에 따라 수축한다. 발산 지수들의 합은 음수이며 그 기계계의 감쇠와 관련되며, 따라서 발산지수들의 합은 감쇠의 변화를 감시하는데 사용되어질 수 있다. 그러나 그 감쇠변화를 감시하기 위해서는 발산지수를 계산하는데 사용하는 신호(data) 부분(segment)이 짧아야 한다. 이는 문제점을 야기시키는데 그 이유는 발산지수가 아주 많은 양의 발산률(divergence rate)의 평균으로서 구해지기 때문이다. 이 문제를 극복하기 위해서, 본 저자는 '순간발산지수(Instantaneous Lyapunov Exponent)'를 도입하였으며, 이 순간발산지수들의 합이 어떻게 기계계의 감쇠와 관련되어지는 가에 대하여 기술하였다. 미분방적식과 시계열(time series)을 이용한 컴퓨터 시뮬레이션은 '순간발산지수들의 합'의 중요성을 입증하였다. 그러나 시계열(또는 실험신호)로 부터의 정확한 순간발산지수를 측정하기는 매우 힘들기 때문에 '부분발산지수(Short term averaged Lyapunov Exponent)'를 또한 도입하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.9
• /
• pp.94-102
• /
• 2003

This paper describes the development and implementation for the SYMBOLGEN(SYMBOL GENerator) software. The SYMBOL-GEN software is for improving graphic processing speed and decreasing data communication load in ASC by genera ting and downloading off-line symbol file for HUD and MFD , which are the main display equipments in military aircraft. The SYMBOL-GEN is developed on PC using C++ language and MS Visual Studio 6.0 development tool. It is also designed to be modified and extended easily by introducing object-oriented software development technique.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.5
• /
• pp.553-561
• /
• 2015

In this study, the performance assessment criterion for reasonable maintenance of shield TBM tunnel was presented. The performance assessment items such as crack, leakage, breakage, spalling, exfoliation/detachment, efflorescence, quality condition, exposure of steel, carbonation, faulting step, bolts condition, drainage condition, ground condition, contact section condition and conduit condition were selected by analyzing domestic and foreign performance assessment criterions and investigating segment lining deterioration cases through the site investigation and in-depth inspection analysis result on the shield TBM tunnel. In addition, the reasonable weight using AHP (Analytic Hierarchy Process) were estimated.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1119-1129
• /
• 2014

This study proposes a novel five-level three-phase hybrid-clamped converter composed of only six switches and one flying capacitor (FC) per phase. The capacitor-voltage-drift phenomenon of the converter under the classical sinusoidal pulse width modulation (SPWM) strategy is comprehensively analyzed. The average current, which flows into the FC, is a function of power factor and modulation index and does not remain at zero. Thus, a specific modulation strategy based on space vector modulation (SVM) is developed to balance the voltage of DC-link and FCs by injecting a common-mode voltage. This strategy applies the five-segment method to synthesize the voltage vector, such that switching losses are reduced while optional vector sequences are increased. The best vector sequence is then selected on the basis of the minimized cost function to suppress the divergence of the capacitor voltage. This study further proposes a startup method that charges the DC-link and FCs without any additional circuits. Simulation and experimental results verify the validity of the proposed converter, modulation strategy, and precharge method.

• The Journal of the Korea Contents Association
• /
• v.10 no.5
• /
• pp.210-219
• /
• 2010

Consumers differ in both horizontally and vertically. Market segmentation aims to divide horizontally different (or heterogeneous) consumers into more similar (or homogeneous) small segments. A specific consumer, however, may differ in vertically. He (or she) may belong to a different market segment from another one where he (or she) belonged to before. In consumer panel data, the vertical difference can be observed by his (or her) choice among brand alternatives are changing over time. The consumer's vertical difference has been defined as 'dynamics'. In this research, we have developed a binary probit model with random-walk coefficients to capture the consumer's dynamics. With an application to a consumer panel data, we have examined how have the random-walk coefficients changed over time.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.1-9
• /
• 2004

The performance analysis code has been developed for vertical take-off and landing(VTOL) UAV which can be utilized as a trade analysis tool in the pre-conceptual design phase. The UAV requires VTOL capability and high speed cruise performance. The main logic of this performance analysis code is to estimate performance parameters of each mission segment by mission fuel weight iteration. The reliability of this performance analysis code is discussed by comparing the data of existing dual flight mode VTOL UAVs such as Boeing CRW and Bell Tilt Rotor.

• Journal of Satellite, Information and Communications
• /
• v.1 no.1
• /
• pp.48-53
• /
• 2006

A K-SBAS (Korean Satellite Based Augmentation System) is proposed as one of the space infrastructure. The proposed system considers the existed elements to the utmost for the most economical SBAS construction. As reference system the current DGPS (differential global positioning system) network is investigated. Space segment is investigated based on the COMS-1 (Communications, Oceanographic, and Meteorological Satellite-1). While bus system of COMS-1 can be kept to minimum change, the communication payload of needed, crucial parts such as software, man power can be easily secured through the DGPS network operation heritage.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.10
• /
• pp.859-870
• /
• 2021

KARI (Korea Aerospace Research Institute) is developing a design framework for the concept and preliminary design of eVTOL aircrafts. A low fidelity mission analysis tool was developed for the eVTOL aircrafts of Lift-Tilt Concept, which have tilt propellers and lift propellers, using open source SUAVE package. For its development, a review for the propeller performance analysis functionality was made. To find the trim solution at each mission segment automatically, an algorithm is implemented, using a global optimization technique through parallel processings and DOE(design of experiment). Using the tool, the one seated eVTOL OPPAV(optionally piloted personal air vehicle) was modeled and evaluated, which results were compared with the preliminary design data.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.244-253
• /
• 2019

Finite control set model-predictive control (FCS-MPC) has received increasing attentions due to its outstanding dynamic performance. It is being widely used in power converters and multilevel inverters. However, FCS-MPC requires a lot of calculations, especially for multilevel-cascaded H-bridge (CHB) static synchronous compensators (STATCOMs), since it has to take account of all the feasible voltage vectors of inverters. Hence, an improved five-segment space vector pulse width modulation (SVPWM) method based on the non-orthogonal static reference frames is proposed. The proposed SVPWM method has a lower number of switching states and requires fewer computations than the conventional method. As a result, it makes FCS-MPC more efficient for multilevel cascaded H-bridge STATCOMs. The partial cost function is adopted to sequentially solve for the reference current and capacitor voltage. The proposed FCS-MPC method can reduce the calculation burden of the FCS-MPC strategy, and reduce both the switching frequency and power losses. Simulation and experimental results validate the excellent performance of the proposed method when compared with the conventional approach.