• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.360-366
• /
• 2021

Garlic is an important crop, accounting for 1.1 trillion won out of 3.7 trillion won for the total production of seasoned vegetables in Korea. On the other hand, the cultivation area and production volume are decreasing continuously due to the shortage of an agricultural labor force, aging, and insufficient mechanization. In particular, the mechanization of garlic sowing is barely performed, resulting in large amounts of labor. Therefore, it is necessary to study the mechanization of planting garlic. Therefore, in this study, to determine the optimal working conditions for mechanical sowing of garlic, an experiment was conducted to compare the yield according to the sowing angle and depth of garlic during sowing. After sowing using a seeding machine set under optimal conditions, the conventional work and yield were compared. The results showed that it is most appropriate to sow garlic with a sowing angle of 45° or 90° and a depth of 2 cm to 4 cm, and there is no difference in the yield between sowing with a sowing machine and conventional work.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.2
• /
• pp.67-72
• /
• 2005

Overwintering capacity, closely related to winter hardiness, of Chinese milk vetch planted with different sowing times and sowing practices was investigated to improve the incorporation into cropping system in Korea. The tolerance to low temperature was evaluated with $LT_50$ using leaf disc leaching method. Dry weight of CMV was reduced remarkably with delayed planting from Sep. 5 to Oct. 20. The differences in tolerance to freezing temperature were not conspicuous among CMV genotypes, however, the differences between genotype (collections at different regions) were due to the plant architecture, mainly to the leaf angle. The crouching genotype collected at central region of Korean peninsula, which showed excellent freezing tolerant, has planophile leaves. The feature of internal constituents of CMV genotypes did not show any noticeable differences with respect to the freezing tolerance which evaluated by leaf disc leaching experiment. To overcome the poor overwintering capacity, tolerant genotype should be developed by selection with considering the plant architecture. The reduction of CMV growth during overwintering period was ameliorated with furrow-sowing under late-sown condition, therefore, when the CMV is inevitably sown late after recommended time, the seeds should be sown on furrow to overcome the cold stress.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2019.09a
• /
• pp.21-21
• /
• 2019

Approximately 80% of rice field in Africa conducts in rainfed (Nishimaki 2017). The rice is damaged by water stress because fields like rainfed lowland repeat drying and humidity of soil because of impossible water control. Then water stress is one of the major limiting factors for decreasing rice yield. So, in initial growth stage, quick and efficient root development is useful way to avoid drought stress by getting water from deeper soil layer with roots elongation as the hypothesis. Daniel et al (2016) reported that NERICA1 and NERICA4 show different patterns of root plasticity for drought stress. NERICA1 has greater development of lateral root in shallow soil layer, while NERICA4 has greater development in deep root elongation to underground. This study was aimed to evaluate the effect of root development in initial growth stage on growing NERICA1 and NERICA4 under different soil moisture condition in rainfed lowland rice field. They were grown in same water condition until 35 days after sowing (35DAS), and after that each varieties were separated in dry and wet condition. The rice plants were grown until 60DAS. The results of soil moisture, the root extension angle, shoot dry weight and bleeding ratio showed that NERICA4 can mitigate dry stress from surface soil compered to NERICA1.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.217-223
• /
• 2008

In this study, a garlic clove planter which is capable of planting holes in soil and planting a clove at the same time was designed and tested for film mulched beds. Planting characteristics of the planter were measured through field experiment. Some characteristics were analyzed with multibody dynamic simulation software. Simulation was performed on opening time of the planting hopper. Measured characteristics were position, angle, and reposition amount of garlic in sowing hole. Experiment results showed that the planted position of garlic in planting was 23.0 mm from the hole wall. The reposition amount of garlic was varied with its position and angle when the planted garlic was pressed by an angled compaction wheel. In case of type II position, the position movement of garlic was larger than type I. Average position movement of type II was 11.5 mm at $20^{\circ}$ of compaction wheel angle. These data suggest that cutting diameter of film opening must be larger than 33 mm to provide enough space for garlic sprouting. Also, simulation results showed that the maximum opening time of the planting hopper was 0.26 second.

• Journal of Biosystems Engineering
• /
• v.42 no.2
• /
• pp.104-111
• /
• 2017

Purpose: We have studied the necessary qualities of seedlings of some leafy vegetables for a riding-type two-row automatic transplanter. When seedlings are planted using a transplanter, long roots may be rounded in the bottom of the tray, and this can interfere with the separation of the seedlings. Uprightness related to leaf spread angle is an important quality for seedlings in mechanical planting. Methods: To select cultivars suitable for the transplanter, we compared varieties of Kimchi cabbage (Chukwang, Daetong, Whipalam and Namdo), head lettuce (Abi and Sensation), cabbage (YR Onnuri, YR Hogel, Harutama, and Ogane), and broccoli (Nicegreen and Earlyyou). To compare the effect of bed soil on root formation and growth, we used five types of soil: Chologi, Burger, Wonjomix, Bio, and Baroker with 2.6-3 L per tray. Growth increment and the degree of root formation were measured according to the RDA guidelines 25 days after sowing for Kimchi cabbage and head lettuce and 44 days after sowing for cabbage and broccoli. Conclusions: According to the plug tray, the optimum seedling age in both 128- and 200-hole trays was 28 days for Kimchi cabbage and 44 days for cabbage and broccoli. Head lettuce took 35 days in 128-hole trays and 31 days in 200-hole trays. Burger soil was most effective for root formation and growth of the four kinds of leafy vegetables; it appeared that smaller soil volume led to faster root formation.