• 대한원격탐사학회지
• /
• 제35권5_1호
• /
• pp.665-679
• /
• 2019

면 단위의 고해상도 토양 수분 측정이 가능한 Cosmic-Ray Neutron Probe(CRNP)를 이용한 토양수분 관측 데이터는 위성기반의 큰 공간해상도를 지닌 토양 수분 자료와 지점 관측 토양 수분 자료를 연결하는 통로의 역할을 수행할 것으로 기대된다. 이러한 CRNP 센서를 이용하여 토양 수분을 산출하기 위해서는 측정된 중성자 강도의 교정이 필요한데 기존의 교정 방법은 관측 기간의 단일 교정 중성자 강도($N_0$)를 이용하여 장기간의 토양 수분 관측에 어려움이 있다. 또한 기존 방법을 이용한 $N_0$는 시간에 따라 변동하는 인자들에 의해 영향을 고려하지 못하며 이로 인해 CRNP 센서를 이용한 토양 수분 관측 값에 불확실성을 초래한다. 이를 극복하기 위해 새로운 교정 방법(Dynamic-$N_0$ 교정 방법)을 제시한다. Dynamic-$N_0$ 교정 방법은 시간에 따른 $N_0$의 변동을 고려함으로써 토양 수분 관측 값을 개선하는 방법으로 비선형 회귀 모델을 이용하여 $N_0$의 시계열 자료를 구하여 토양 수분 산출에 이용한다. 본 연구에서는 Dynamic-$N_0$ 교정 방법을 이용하여 산출된 토양 수분을 지점 기반 토양 수분 및 기존의 교정방법을 이용한 토양 수분 산출 값과 비교하였으며 결과적으로 상관계수를 0.7에서 0.72로 개선하였다. RMSE와 Bias는 각각 $0.036m^3m^{-3}$에서 $-0.026m^3m^{-3}$으로, $-0.006m^3m^{-3}$에서 $-0.001m^3m^{-3}$으로 개선되었다. Dynamic-$N_0$ 교정 방법의 기존의 방법 대비 탁월한 성능은 CRNP 센서 주변의 수소 공급원에 의하여 $N_0$의 변동이 발생했음을 시사한다. 그러나 몇몇 중성자 강도에 영향을 미치는 수소 공급원들에 대한 고려가 구체적으로 이뤄지지 않았는데 이는 향후 연구를 통해 Cosmic-Ray를 이용한 토양 수분 관측이 보다 개선될 수 있음을 보여준다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권3호
• /
• pp.405-412
• /
• 2019

Objective: This experiment was conducted to determine the chemical composition, digestible energy (DE) and metabolizable energy (ME) contents of corn germ meals (CGM) and to develop equations to predict the corresponding energy contents based on the chemical characteristics of individual CGM. Methods: Sixty-six barrows (initial body weight = $51.3{\pm}4.6kg$) were allotted to 11 diets including a basal diet and 10 CGM test diets in a completely randomized design. In the test diets, CGM was included in replacement of 30% of the energy-providing ingredients in the basal diet, resulting in a final inclusion rate of 29.1%. Each diet was fed to 6 barrows housed in individual metabolism crates for a 7-d acclimation period followed by a 5-d total but separate collection of feces and urine. Results: Considerable variation was observed in acid-hydrolyzed ether extract, ether extract, ash, calcium (Ca) and total phosphorus contents among the CGM samples. On dry matter (DM) basis, the DE and ME contents of the CGM ranged from 10.22 to 15.83 MJ/kg and from 9.94 to 15.43 MJ/kg, respectively. The acid detergent fiber (ADF) contents were negatively correlated with the DE and ME contents of CGM samples. The best-fit prediction equations for the DE and ME values (MJ/kg DM) of the 10 CGM were: DE = 26.85-0.28 insoluble dietary fiber (%)-17.79 Ca (%); ME = 21.05-0.43 ADF (%)-11.40 Ca (%). Conclusion: The chemical compositions of CGM vary depending on sources, particularly in ether extract and Ca. The DE and ME values of CGM can be predicted based on their chemical composition in growing pigs.

• 한국환경생태학회지
• /
• 제28권4호
• /
• pp.472-483
• /
• 2014

도시림 개선을 위한 노력은 꾸준하게 진행되어 왔으나 사회적인 욕구를 제대로 반영하였는지에 대한 평가가 없어 향후 지속적인 개선 및 관리의 방향을 제안하기는 어려운 상태이다. 사회환경과 생물환경이 어우러진 도시림을 효율적으로 개선하기 위해서는 양적 증대 뿐만아니라 생물의 분포 및 서식, 인간의 이용성을 평가할 수 있는 연결성, 건전성, 접근성 등 질적인 측면을 동시에 고려할 수 있는 생태적 건전성에 대한 평가지표의 필요성에 따라 연구를 진행하였다. 연구는 생태적 건전성 평가시 중요한 항목에 대한 상대적 중요도 평가, 문헌고찰을 통한 세부 지표 선정, 타당성 검토의 체계를 갖는다. 결과적으로 도시림은 자연림과는 다른 기능이 존재한다는 전제로, 도시림 평가는 고유의 기능인 생태성 뿐만아니라 인간의 간섭을 고려할 수 있는 사회성, 관리성이 충분하게 고려되어야 하나 중요도에 대한 설문조사 결과 생태성이 다른 가치에 우선하는 것으로 나타났다. 이에 생태적 건전성을 평가할 수 있는 세부지표를 선정하였는데, 식생관련 지표로는 희귀성, 훼손잠재성, 자연성, 면적, 다양성, 발생기간, 야생조류관련 지표로는 숲 발달정도, 면적을 추출하여 분산분석을 실시한 결과 안정성, 자연성, 다양성, 잠재성, 서식가능성이 평가지표로 선정되었다.

• 대한지역사회영양학회지
• /
• 제28권3호
• /
• pp.235-244
• /
• 2023

Objectives: Based on the results from the Korean Total Diet Study (KTDS), the sodium (Na) and potassium (K) intake of Koreans were estimated and compared with intake estimates from the Food & Nutrient Database (FNDB), as in the Korea National Health and Nutrition Examination Survey (KNHANES) to verify the validity of these estimates. Methods: One hundred and thirty-four representative foods (RFs) covering 92.5% of the total food intake of Koreans were selected, and 228 pairs of corresponding 'RF x representative cooking method' were derived by reflecting the methods used mainly in terms of frequency and quantity in their cooking. RF samples were collected from three cities with a larger population size in three regions (nine cities) nationwide, and six composite samples were made for each RF, considering its regional and/or seasonal characteristics. One thousand three hundred and sixty-eight 'RF x representative cooking method' pair samples were prepared, and the Na and K contents were assessed using inductively coupled plasma atomic emission spectrometry (ICP-MS). The Na and K intake of the Korean population was estimated by linking the content with the food intake data from the 7th KNHANES. Results: The mean Na and K intake of Koreans were 2,807.4 mg and 2,335.0 mg per person per day, respectively. A comparison with the Na and K intake from KNHANES, including only RFs of KTDS, showed comparable results with less than 5% variation. While the contribution and ranking of food items to Na intake were similar between KNHANES and KTDS, there were differences in K intake. This was attributed to the large discrepancies in the K content of rice and coffee between KTDS results and the values in the 9th Revision of the National Food Composition Table used in KNHANES. Conclusions: The Na and K intake of Koreans estimated based on the KTDS, which performed nutrient analysis on samples prepared to a 'table-ready' state using foods of the representative collection, was similar and comparable with that of KNHANES. This supports the validity and usefulness of FNDB-based nutrient intake estimation at the population level. The list of nutrients studied in KTDS is expected to be expanded, allowing for intake estimation of nutrients with currently insufficient or absent information in the FNDBs in use.

• 한국수자원학회논문집
• /
• 제54권5호
• /
• pp.289-299
• /
• 2021

본 연구에서는 수원 유역 혹은 한계지지면적의 변동성 규모에 따른 하천망의 형상 변화를 추출하여 설마천 시험유역의 분기 특성에 대한 해석을 수행하였다. 수원 유역의 면적이 감소함에 따라 대상 유역의 내부에는 하천망의 분기 현상이 발생하며, 그 결과로서 하천망의 신장(총 하천 길이의 증가)과 함께 하천망의 확장(수원의 개수 증가)이 동시에 나타남을 볼 수 있었다. 하천망이 신장되는 경우 하천 구간의 길이가 증가하는 경향이 새로운 수원이 생성되는 경향보다 우세하게 나타나는 반면, 하천망이 확장되는 경우 반대 거동에 따라 배수망이 유역 내부의 공간을 채워가는 과정으로 나타남을 확인할 수 있었다. 이로부터 자연 유역의 하천망들이 가지는 규모 불변성은 수원 유역의 규모가 감소함에 따라 나타나는 하천망의 신장 특성과 하천망의 확장 특성이 상호 균형을 이루면서 발현되는 지형학적 특성으로 기술될 수 있었다. 설마천 시험유역의 분기 구조는 하천망의 신장 특성과 규모 불변성이 공존하는 형태로 판단되며 강우로 인한 유출 현상에 보다 지배적인 역할을 하는 요인에 대한 후속 연구가 필요한 것으로 판단된다.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2003년도 제2차 연례학술대회 발표논문집
• /
• pp.66-72
• /
• 2003

Toxicogenomics is now emerging as one of the most important genomics application because the toxicity test based on gene expression profiles is expected more precise and efficient than current histopathological approach in pre-clinical phase. One of the challenging points in Toxicogenomics is the construction of intelligent database management system which can deal with very heterogeneous and complex data from many different experimental and information sources. Here we present a new Toxicogenomics database developed as a part of 'Toxicogenomics for Efficient Safety Test (TEST) project'. The TEST database is especially focused on the connectivity of heterogeneous data and intelligent query system which enables users to get inspiration from the complex data sets. The database deals with four kinds of information; compound information, histopathological information, gene expression information, and annotation information. Currently, TEST database has Toxicogenomics information fer 12 molecules with 4 efficacy classes; anti cancer, antibiotic, hypotension, and gastric ulcer. Users can easily access all kinds of detailed information about there compounds and simultaneously, users can also check the confidence of retrieved information by browsing the quality of experimental data and toxicity grade of gene generated from our toxicology annotation system. Intelligent query system is designed for multiple comparisons of experimental data because the comparison of experimental data according to histopathological toxicity, compounds, efficacy, and individual variation is crucial to find common genetic characteristics .Our presented system can be a good information source for the study of toxicology mechanism in the genome-wide level and also can be utilized fur the design of toxicity test chip.

• 생태와환경
• /
• 제33권3호통권91호
• /
• pp.295-303
• /
• 2000

10년 전부터 논농사가 중단되고 농업배수와 생활하수가 유입하여 식생이 번성한 습지에서 수질개선 효과를 측정하였다. 습지의 체류시간이 평균 1.2일로 매우 짧음에도 불구하고 SS와 질소의 제거효과는 높게 나타났다. 질산성질소의 제거효율은 평균 유입부하량의 61.4% (26.8 g/m$^{2}$/yr)로 조사항목 중 가장 높았으며, TN은 23.5% (45.1 g/m$^{2}$/yr), SS는 56% (1,515 g/m$^{2}$/yr)의 제거효율을 나타냈다. 습지에서의 유기물 제거효율은 낮았다. COD는 총 유입부하량의 14.2% (104 g/m$^{2}$/yr), VSS는 28.4% (28.4 g/m$^{2}$/yr)가 제거되었으나, DOC는 1.0% (7.6 g/m$^{2}$/yr)로 거의 제거되지 않았다. 평균 유입부하량이 32.5 g/m$^{2}$/yr이었던 TP는 대부분이 제거되지 않았으며 용존인의 경우는 유입된 인의 분해 및 퇴적물에서의 재용출에 의하여 습지로부터 유출되는 특성을 보였다. 습지에 설치된 enclosure에서는 물의 흐름이 차단되는 초기에 질산성질소를 제외하고 거의 모든 물질농도가 높아지는 것으로 나타났다. 이러한 현상은 체류시간이 길어지면서 다시 인을 제외한 SS, 유기물(VSS, COD, DOC)과 총질소는 감소하는 경향을 보였다. 식생과 습지 바닥에 축척되어 있는 식물고사체의 제거는 용존산소의 증가에 의한 질화작용으로 질산성질소의 농도가 증가할 뿐 습지의 정화효율에 미치는 영향은 적었다. 이것은 습지유출수의 유기물농도가 습지 내에 분포하는 식생보다는 퇴적된 유기물과 상부 수층간의 물질교환 평형에 의해 결정되는 것이며, 일부 퇴적층을 제거하고 체류시간을 늘인다고 해도 저질과의 평형농도 이상으로 수질을 개선할 수는 없다는 것을 의미한다. 한편 자연습지는 강우기의 유입수에 대하여 안정적인 처리효율을 보여 유역 비점원에서의 오염물질 유출방지에 활용이 가능할 것으로 보인다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.241-241
• /
• 2012

Semiconductor industry has been taking the advantage of improvements in process technology in order to maintain reduced device geometries and stringent performance specifications. This results in semiconductor manufacturing processes became hundreds in sequence, it is continuously expected to be increased. This may in turn reduce the yield. With a large amount of investment at stake, this motivates tighter process control and fault diagnosis. The continuous improvement in semiconductor industry demands advancements in process control and monitoring to the same degree. Any fault in the process must be detected and classified with a high degree of precision, and it is desired to be diagnosed if possible. The detected abnormality in the system is then classified to locate the source of the variation. The performance of a fault detection system is directly reflected in the yield. Therefore a highly capable fault detection system is always desirable. In this research, time series modeling of the data from an etch equipment has been investigated for the ultimate purpose of fault diagnosis. The tool data consisted of number of different parameters each being recorded at fixed time points. As the data had been collected for a number of runs, it was not synchronized due to variable delays and offsets in data acquisition system and networks. The data was then synchronized using a variant of Dynamic Time Warping (DTW) algorithm. The AutoRegressive Integrated Moving Average (ARIMA) model was then applied on the synchronized data. The ARIMA model combines both the Autoregressive model and the Moving Average model to relate the present value of the time series to its past values. As the new values of parameters are received from the equipment, the model uses them and the previous ones to provide predictions of one step ahead for each parameter. The statistical comparison of these predictions with the actual values, gives us the each parameter's probability of fault, at each time point and (once a run gets finished) for each run. This work will be extended by applying a suitable probability generating function and combining the probabilities of different parameters using Dempster-Shafer Theory (DST). DST provides a way to combine evidence that is available from different sources and gives a joint degree of belief in a hypothesis. This will give us a combined belief of fault in the process with a high precision.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1995년도 가을 학술발표회 논문집
• /
• pp.15.2-22
• /
• 1995

Evaluating stiffness of near-surface materials has been one of the critically important tasks in many civil engineering works. It is the main goal of geotechnical characterization. The so-called deflection-response method evaluates the stiffness by measuring stress-strain behavior of the materials caused by static or dynamic load. This method, however, evaluates the overall stiffness and the stiffness variation with depth cannot be obtained. Furthermore, evaluation of a large-area geotechnical site by this method can be time-consuming, expensive, and damaging to many surface points of the site. Wave-propagation method, on the other hand, measures seismic velocities at different depths and stiffness profile (stiffness change with depth) can be obtained from the measured velocity data. The stiffness profile is often expressed by shear-wave (S-wave) velocity change with depth because S-wave velocity is proportional to the shear modulus. that is a direct indicator of stiffiiess. The crosshole and downhole method measures the seismic velocity by placing sources and receivers (geophones) at different depths in a borehole. Requirement of borehole installation makes this method also time-consuming, expensive, and damaging to the sites. Spectral-Analysis-of-Surface-Waves (SASW) method places both source and receivers at the surface, and records horizontally-propagating surface waves. Based upon the theory of surfacewave dispersion, the seismic velocities at different depths are calculated by analyzing the recorded surface-wave data. This method can be nondestructive to the sites. However, because only two receivers are used, the method requires multiple measurements with different field setups and, therefore, the method often becomes time-consuming and labor-intensive. Furthermore. the inclusion of noise wavefields cannot be handled properly, and this may cause the results by this method inaccurate. When multi-channel recording method is employed during the measurement of surface-waves, there are several benefits. First, usually single measurement is enough because multiple number (twelve or more) of receivers are used. Second, noise inclusion can be detected by coherency checking on the multi-channel data and handled properly so that it does not decrease the accuracy of the result. Third, various kinds of multi-channel processing techniques can be applied to f1lter unwanted noise wavefields and also to analyze the surface-wavefields more accurately and efficiently. In this way, the accuracy of the result by the method can be significantly improved. Fourth, the entire system of source, receivers, and recording-processing device can be tied into one unit, and the unit can be pulled by a small vehicle, making the survey speed very fast. In all these senses, multi-channel recording of surface waves is best suited for a routine method for geotechnical characterization in most of civil engineering works.

• 한국물환경학회지
• /
• 제31권4호
• /
• pp.377-386
• /
• 2015

The purpose of this research was to suggest the water quality improvement in streams by evaluating the distribution characteristics of organics and ammonia nitrogen discharged by pollution sources from human living. The public sewage treatment plants'(PSTPs) effluents and the waters from streams in Gyeonggi-do were sampled and analyzed. Nitrogenous oxygen demand (NOD) was measured for the stream waters as well as the PSTPs effluents, and the correlations of NOD and $NH_3$-N, $NH_3$-N and water temperature in the PSTPs effluents were confirmed. In the case of the stream waters, the ratios of NOD to BOD and $NH_3$-N increased in the downstream sites after discharging the PSTPs effluents. As a result of statistical analysis of $NH_3$-N concentrations for the national water quality monitoring streams in Gyeonggi-do, $NH_3$-N showed the non-normal distribution which were biased to the left, but showed the considerable level because of higher coefficient of variation. Therefore, it is required to establish the water quality standard for the $NH_3$-N as a new parameter for judging the quality of the streams. In addition, inducing complete nitrification and introducing a logical standard setting system are needed to improve the water quality of streams by identifying distribution of the nitrogen components from PSTPs effluents.