• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.566-574
• /
• 2013

In this paper, direct power control system for three-phase PFC AC/DC converter without the source voltage sensors is proposed. The sinusoidal input current and unity effective power factor are realised based on the estimated flux in the observer. Both active and reactive power calculated using estimated flux. The estimation of flux is performed based on the reduced-order virtual flux observer using the actual currents and the command control voltage. Moreover, source voltage sensors are replaced by a estimated flux. DC output voltage has been compensated by DC output ripple voltage estimation algorithm. The active and reactive powers estimation are performed based on the estimated flux and Phase angle. The proposed algorithm is verified through simulation and experiment.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.1-8
• /
• 2016

Dead time is typically incorporated in voltage source inverter systems to prevent short circuit cases. However, dead time causes an error between the output voltage and reference voltage. Hence, voltage equation-based algorithms, such as motor parameter estimation and back electromotive force (EMF)-based sensorless algorithms, are prone to estimation errors. Several dead-time compensation methods have been developed to reduce output voltage errors. However, voltage errors are still common in zero current crossing areas, and an effect of the error is much worse in a low speed region. Therefore, employing voltage equation-based algorithms in low speed regions is difficult. This study analyzes the conventional dead-time compensation method and output voltage errors in low speed operation areas. A current shaping method that can reduce output voltage errors is also proposed. Experimental results prove that the proposed method reduces voltage errors and improves the accuracy of the parameter estimation method and the performance of the back EMF-based sensorless algorithm.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.485-488
• /
• 1999

In this paper, a current control system for single phase PWM AC/DC converter without the source voltage sensors is proposed. The sinusoidal input current and unity effective power factor are realised based on the estimated source voltage in the controller. The estimation of source voltage is performed by the reduced-order Luenberger observer using actual currents. The estimated source voltage is used to accomplish unity power factor. The proposed method is proved by experiments.

• 동력기계공학회지
• /
• 제14권1호
• /
• pp.27-33
• /
• 2010

We investigate some operation characteristics and energy efficiency of the BLDC motor system driven by different two types power conversion method depends on same battery source for applying to electrical motor propulsion system of a small ship. Also, we suggest an estimation manner of operating performances such as total running distance and operating speed of ships from basic discharge voltage characteristics of batteries. Through some experiments, direct power conversion was better than indirect method on the view point of energy efficiency and the voltage discharge characteristics could be used as important design factor for estimating operating performances of small ships driven by electrical motors.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권8호
• /
• pp.529-535
• /
• 2000

In this paper, a current control system of a single phase PWM AC/DC converter using a reduced-order Luenberger observer without source voltage sensors is proposed. The sinusoidal input current and unity input power factor are realised based on the estimated source voltage performed by the reduced-order Luenberger observer using actual currents and DC link voltage. The poles of the reduced-order Luenberger observer are placed in the left half plane of s-plane by the pole-placement method in order to acquire the stability of the observer. The magnitude and the phase of the estimated source voltage are used to accomplish the unity power factor. The proposed method is implemented by DSP(Digital Signal Processor). Experimental Results verify that the reduced-order observer estimates the source voltage without the estimation error and the control system accomplishes the unity power factor, and constant DC link voltage.

• 대한전자공학회논문지TC
• /
• 제47권5호
• /
• pp.60-68
• /
• 2010

통신서비스에 장애를 유발하는 전력선에 의한 전자유도 현상에 대한 방호를 위하여는 유도전압을 평가하여야 하고 상응한 대책을 수행하여야 한다. 유도전압을 평가하는 방식은 ITU 규격과 일본 유도자료로부터 국내에 도입되어 법률 고시화되어 있는데 이것으로 수용되지 못하는 유도 커플링상의 제원 요소들이 있다. 본 논문에서는 계산 수행 적용이 곤란한 범위를 포괄할 수 있도록 좀더 일반화된 고전적 유도 및 전자파 원론 해석 근간의 전자계 형성에 의한 소스와 관측점의 유도전압 산출 방식에 대한 기술을 분석하여 제시하였다.

• 조명전기설비학회논문지
• /
• 제14권4호
• /
• pp.39-47
• /
• 2000

본 논문에서는 입력전류 추정에 의한 전밥형 PWM 컨버터의 정상상태 및 과도상태 특성을 개선하기 위하여 정현추종제어기를 제안한다. 그리고, 입력전류의 추정방법과 제어기의 구성에 대해서 논의된다. DC 출력전압은 PI제어기로 제어되며, AC 입력전류를 직접추총 제어하는 정현추종 전류제어기가 입력전류 제어기로 사용된다. 정현추종 전류제아기는 좌표변환 알고리즘 없이 사용가능 하므로 제어계를 간소화 할 수 있다. 입력전류 제어계의 전달함수로부터 입력전류의 정상상태오차가 0이 되고, 입력전압의 동에 대해서도 제안한 제어계는 영향을 받지 않는다는 것을 알 수 있다. 아울러 제안한 방법에 대한 타당성이 시뮬레이션 및 부하, 입력 전압 변동에 대한 실험결과로부터 확인할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2478-2480
• /
• 1999

In this paper, the authors propose a current control system for three phase PWM AC/DC converter without the source voltage sensors. The sinusoidal input current and unity effective power factor are realised based on the estimated source voltage in the controller. The estimation of source voltage is performed based on Luenberger observer using actual currents. The estimated source voltage is used to accomplish unity power factor. The proposed method is proved by simulations.

• Journal of Power Electronics
• /
• 제2권2호
• /
• pp.77-87
• /
• 2002

The purpose of this paper is to improve power conversion efficiency of three-phase soft-switching voltage-source inverter with an auxiliary resonant dc link (ARDCL) snubber circuit. Firstly, the operation principle of ARDCL snubber circuit is described. Secondly, this paper proposes an effictive generation method of zero voltage vector for three-phase voltage-source soft-switching inverter in power losses in which power losses in the ARDCL snubber circuit can be reduced. In particular, zero voltage holding interval in the inverter DC busline can be controlled due to the new generation scheme of zero voltage vector. Thirdly, a simulator for power loss analysis for power loss characteristics based on actual system, is developed. the validity of developed. The validity of developed simulator of proved with experimental results. Finally, power efficency of three-phase inverter is estimated according to high carrier frequency by using the simulatior.

• 전기학회논문지
• /
• 제61권10호
• /
• pp.1442-1447
• /
• 2012

In this paper, direct power control system for three-phase PWM AC/DC converter without the source voltage sensors is proposed. The sinusoidal input current and unity effective power factor are realised based on the estimated flux in the observer. Both active and reactive power calculated using estimated flux. The estimation of flux is performed based on the Reduced-order flux observer using the actual currents and the command control voltage. The source voltage sensors are replaced by a flux estimator. The active and reactive powers estimation are performed based on the estimated flux and Phase anble. The proposed algorithm is verified through simulation and experiment.