• IE interfaces
• /
• v.20 no.4
• /
• pp.504-514
• /
• 2007

The multicast routing problem lies in the composition of a multicast routing tree including a source node and multiple destinations. There is a trade-off relationship between cost and delay, and the multicast routing problem of optimizing these two conditions at the same time is a difficult problem to solve and it belongs to a multi-objective optimization problem (MOOP). A multi-objective genetic algorithm (MOGA) is efficient to solve MOOP. A micro-genetic algorithm(${\mu}GA$) is a genetic algorithm with a very small population and a reinitialization process, and it is faster than a simple genetic algorithm (SGA). We propose a multi-objective micro-genetic algorithm (MO${\mu}GA$) that combines a MOGA and a ${\mu}GA$ to find optimal solutions (Pareto optimal solutions) of multicast routing problems. Computational results of a MO${\mu}GA$ show fast convergence and give better solutions for the same amount of computation than a MOGA.

• The Journal of Engineering Research
• /
• v.7 no.1
• /
• pp.37-51
• /
• 2005

An and hoc network is a collection of wireless mobile nodes forming a temporary network without the centralized administration. Due to the limited transmission range of wireless work interface, multiple networks "hops" maybe needed for one node to exchange data with adjacent node. In recent years, a variety of new routing protocol about ad hoc network was developed. This paper presents a new routing protocol based on the Dynamic Source Routing which is not suitable for the high mobility ad hoc network. The Enhanced DR adapts quickly to routing changes when node movement is frequent. When a trunk route is broken, this protocol will utilize the alternative route saved in the route to discovery quickly the new route. It improves the performance of the existing DSR algorithm, so that the negative impacts from weakness of DSR are reduced.

• International Journal of Computer Science & Network Security
• /
• v.24 no.9
• /
• pp.195-201
• /
• 2024

Vehicular Ad-hoc Networks (VANETs) became very popular in few years and it has been widely used in research and industry communities. VANET is a collection of wireless vehicle nodes forming a temporary network without using any centralized Road Side Unit (RSU). VANET is a subset of Mobile Adhoc Networks (MANET). It improves the safety of vehicles. It also supports Intelligent Transportation Systems.Routing is the major component of communication protocols in VANETs. Packets are to be routed from the source node to destination node. Because of frequent topology changes and routing overhead, selection of routing protocol in VANET is a great challenge. There are various routing protocols available for VANET. This paper involves study of Temporally Ordered Routing protocol (TORA) and performance metrics are analyzed with the help of NS2 Simulator.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.46-55
• /
• 2020

Ad Hoc network is a special wireless network, mainly because the nodes are no control center, the topology is flexible, and the networking could be established quickly, which results the transmission stability is lower than other types of networks. In order to guarantee the transmission of data packets in the network effectively, an improved Queue Ad Hoc On-demand Distance Vector Routing protocol (Q-AODV) for node detection by using blockchain technology is proposed. In the route search process. Firstly, according to the node's daily communication record the cluster is formed by the source node using the smart contract and gradually extends to the path detection. Then the best optional path nodes are chained in the form of Merkle tree. Finally, the best path is chosen on the blockchain. Simulation experiments show that the stability of Q-AODV protocol is higher than the AODV protocol or the Dynamic Source Routing (DSR) protocol.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.6
• /
• pp.77-81
• /
• 2016

This paper deals with the optimization problem that decides the routing of connection between multi-source and multi-sink. For this problem, there is only in used the mathematical approach as linear programming (LP) software package and has been unknown the polynomial time algorithm. In this paper we suggest the heuristic algorithm with $O(mn)^2$ time complexity to solve the optimal solution for this problem. This paper suggests the simple method that assigns the possible call flow quantity to augmenting path of ($s_i,t_i$) city pair satisfied with demand of ($s_i,t_i$). The proposed algorithm can be get the same optimal solution as LP for experimental data.

• Annual Conference of KIPS
• /
• 2009.11a
• /
• pp.223-224
• /
• 2009

A wireless ad hoc network is a decentralized wireless network. The network is ad hoc because each node is willing to forward data for other nodes, and so the determination of which nodes forward data is made dynamically based on the network connectivity. In this paper, we proposed new route maintenance algorithm to improve the efficiency and effective in order to reach destination node. In this algorithm we improve existing route maintenance in Dynamic Source Routing protocol, to improve the algorithm we make a new message we call Emergency Message (EMM). The emergency message used by the node moved to provide information of fault detection.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.504-527
• /
• 2015

Underwater wireless sensor networks (UWSNs) are similar to the terrestrial sensor networks. Nevertheless, there are different characteristics among them such as low battery power, limited bandwidth and high variable propagation delay. One of the common major problems in UWSNs is determining an efficient and reliable routing between the source node and the destination node. Therefore, researchers tend to design efficient protocols with consideration of the different characteristics of underwater communication. Furthermore, many routing protocols have been proposed and these protocols may be classified as location-based and location-free routing protocols. Pressure-based routing protocols are a subcategory of the location-free routing protocols. This paper focuses on reviewing the pressure-based routing protocols that may further be classified into non-void avoidance protocols and void avoidance protocols. Moreover, non-void avoidance protocols have been classified into single factor based and multi factor based routing protocols. Finally, this paper provides a comparison between these protocols based on their features, performance and simulation parameters and the paper concludes with some future works on which further study can be conducted.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1917-1924
• /
• 2015

Efficient routing algorithm is required to transmit data from source to destination by multi-hop transmission in wireless sensor networks. In the multi-hop transmission, multipath routing can be one of the solutions to cope with the traffic congestion and unstable link condition. In this paper, we propose partial multipath routing which does not establish a secondary full routing path but a partial multipath to complement some poor links, and it can enable stable data transmission and reduce the number of nodes in routing path and the required total power compared with conventional multipath routing.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.5
• /
• pp.1354-1372
• /
• 2012

Route establishment in Mobile Ad Hoc Network (MANET) is the key mechanism to a successful connection between a pair of source and destination nodes. An efficient routing protocol constructs routing path with minimal time, less routing overhead and capable of utilizing all possible link connectivity. In general, most on-demand MANET routing protocols operates over symmetrical and bidirectional routing path, which is infeasible due to the inherent heterogeneous properties of wireless devices. Simulation results show that the presence of unidirectional links on a network severely affect the performance of a routing protocol. In this paper, a robust protocol independent scheme is proposed, which enable immediate rediscovery of alternative route for a path blocked by a unidirectional link. The proposed scheme is efficient; route rediscovery is locally computed, which results in significant minimization of multiple route packets flooding. Nodes may exploit route information of immediate neighbors using the local reply broadcast technique, which then redirect the control packets around the unidirectional links, therefore maintaining the end-to-end bidirectional connection. The proposed scheme along with Ad Hoc On-demand Distance Vector (AODV) and AODV-Blacklist routing protocol is investigated over three types of mobility models. Simulation results show that the proposed scheme is extremely reliable under poor network conditions and the route connectivity can be improved by as much as 75%.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.772-776
• /
• 2004

This paper proposes an interference avoidance approach for Constraint-Based Routing (CBR) algorithm in the Multi-Protocol Label Switching (MPLS) network. The MPLS network itself has a capability of integrating among any layer-3 protocols and any layer-2 protocols of the OSI model. It is based on the label switching technology, which is fast and flexible switching technique using pre-defined Label Switching Paths (LSPs). The MPLS network is a solution for the Traffic Engineering(TE), Quality of Service (QoS), Virtual Private Network (VPN), and Constraint-Based Routing (CBR) issues. According to the MPLS CBR, routing performance requirements are capability for on-line routing, high network throughput, high network utilization, high network scalability, fast rerouting performance, low percentage of call-setup request blocking, and low calculation complexity. There are many previously proposed algorithms such as minimum hop (MH) algorithm, widest shortest path (WSP) algorithm, and minimum interference routing algorithm (MIRA). The MIRA algorithm is currently seemed to be the best solution for the MPLS routing problem in case of selecting a path with minimum interference level. It achieves lower call-setup request blocking, lower interference level, higher network utilization and higher network throughput. However, it suffers from routing calculation complexity which makes it difficult to real task implementation. In this paper, there are three objectives for routing algorithm design, which are minimizing interference levels with other source-destination node pairs, minimizing resource usage by selecting a minimum hop path first, and reducing calculation complexity. The proposed CBR algorithm is based on power factor calculation of total amount of possible path per link and the residual bandwidth in the network. A path with high power factor should be considered as minimum interference path and should be selected for path setup. With the proposed algorithm, all of the three objectives are attained and the approach of selection of a high power factor path could minimize interference level among all source-destination node pairs. The approach of selection of a shortest path from many equal power factor paths approach could minimize the usage of network resource. Then the network has higher resource reservation for future call-setup request. Moreover, the calculation of possible path per link (or interference level indicator) is run only whenever the network topology has been changed. Hence, this approach could reduce routing calculation complexity. The simulation results show that the proposed algorithm has good performance over high network utilization, low call-setup blocking percentage and low routing computation complexity.