• Advances in nano research
• /
• 제3권1호
• /
• pp.49-54
• /
• 2015

The structure represents symmetrical metal electrode (gate 1) - front $SiO_2$ layer - n-Si nanowire FET - buried $SiO_2$ layer - metal electrode (gate 2). At the symmetrical gate voltages high conductive regions near the gate 1 - front $SiO_2$ and gate 2 - buried $SiO_2$ interfaces correspondingly, and low conductive region in the central region of the NW are formed. Possibilities of applications of nanosize FETs at the deep inversion and depletion as a distributed capacitance are demonstrated. Capacity density is an order to ${\sim}{\mu}F/cm^2$. The charge density, it distribution and capacity value in the nanowire can be controlled by a small changes in the gate voltages. at the non-symmetrical gate voltages high conductive regions will move to corresponding interfaces and low conductive region will modulate non-symmetrically. In this case source-drain current of the FET will redistributed and change current way. This gives opportunity to investigate surface and bulk transport processes in the nanosize inversion channel.

• 한국재료학회지
• /
• 제11권9호
• /
• pp.776-780
• /
• 2001

$SiO_2$ and polycrystalline Si layers were sequentially grown on (100) Si. NiSi was formed on this substrate from a 20nm Ni layer or a 20nm Ni/5nm Ti bilayer by rapid thermal annealing (RTA) at $300~500^{\circ}C$ to compare thermal stability. In addition, MOS capacitors were fabricated by depositing a 20nm Ni layer on the Poly-Si/$SiO_2$substrate, RTA at $400^{\circ}C$ to form NiSi, $BF_2$ or As implantation and finally drive- in annealing at $500~800^{\circ}C$ to evaluate electrical characteristics. When annealed at $400^{\circ}C$, NiSi made from both a Ni monolayer and a Ni/Ti bilayer showed excellent thermal stability. But NiSi made from a Ni/Ti bilayer was thermally unstable at $500^{\circ}C$. This was attributed to the formation of insignificantly small amount of NiSi due to suppressed Ni diffusion through the Ti layer. PMOS and NMOS capacitors made by using a Ni monolayer and the SADS(silicide as a dopant source) method showed good C-V characteristics, when drive-in annealed at $500^{\circ}C$ for 20sec., and$ 600^{\circ}C$ for 80sec. respectively.

• 한국전기전자재료학회논문지
• /
• 제25권5호
• /
• pp.398-402
• /
• 2012

Synthesis of $Li_2MnSiO_4$ was attempted by the conventional solid-state reaction method, and the phase formation behavior according to the change of the calcination condition was investigated. When the mixture of the three source materials, $Li_2O$, MnO and $SiO_2$ powders, were used for calcination in air, it was difficult to develop the $Li_2MnSiO_4$ phase because the oxidation number of $Mn^{2+}$ could not be maintained. Therefore, two-step calcination was applied: $Li_2SiO_3$ was made from $Li_2O$ and $SiO_2$ at the first step, and $Li_2MnSiO_4$ was synthesized from $Li_2SiO_3$ and MnO at the second step. It was easy to make $Li_2MnSiO_3$ from $Li_2O$ and $SiO_2$. $Li_2MnSiO_4$ single phase was developed by the calcination at $900^{\circ}C$ for 24 hr in Ar atmosphere as the oxidation of $Mn^{2+}$ was prevented. However, the $Li_2MnSiO_4$ was ${\gamma}-Li_2MnSiO_4$, one of the polymorph of $Li_2MnSiO_4$, which could not be used as the cathode materials in Li-ion batteries. By applying the additional low temperature annealing at $400^{\circ}C$, the single phase ${\beta}-Li_2MnSiO_4$ powder was synthesized successfully through the phase transition from ${\gamma}$ to ${\beta}$ phase.

• 한국광학회지
• /
• 제9권3호
• /
• pp.162-167
• /
• 1998

CF4 이온빔보조증착법으로 굴절률이 유리보다 낮은 SiOxFy 박막을 제작하고 광학적, 구조적 및 화학적 특성을 연구하였다. End-Hall 이온총의 양극전압의 간소에 따라 SiOxFy 박막의 굴절률은 1.455까지 변하였으며, 이온빔 전류밀도의 증가에 따라서 굴절률은 1.462에서 1.430까지 변하였다. XPS와 FT-IR 분석으로부터 SiOxFy 박막의 F양이 증가함에 따라 Si-O 결합은 파수가 높은 쪽으로 이동하였고, F이 약 8.5at.%인 SiOxFy 박막은 OH 결합이 매우 감소하였으여, 박막 표면의 F이 H2O와 결합하여 탈착되는 것을 알았다. SiOxFy 박막의 응력은 0.3GPa 이하의 압축응력이었으며, 결정구조는 비정질이었다. SiOxFy 박막의 응용으로서 SiOxFy 박막과 흡수층 Si 박막을 이용하여 2층 반사방지막을 제작하였다.

• 한국정보통신학회논문지
• /
• 제21권5호
• /
• pp.876-884
• /
• 2017

TCAD 시뮬레이션을 이용하여 소스 영역으로 오버랩된(Overlapped) 게이트를 가진 실리콘(Si), 게르마늄(Ge)과 실리콘-게르마늄(Si-Ge) Hetero 터널 전계효과 트랜지스터(Tunnel Field-Effect Transistor; TFET)의 터널링 전류 특성을 분석하였다. $SiO_2$를 산화막으로 사용한 Si-TFET의 경우에 포인트와 라인 터널링이 모두 나타나서 험프(Hump) 현상이 나타난다. Ge-TFET는 구동전류가 Si-TFET보다 높으나 누설전류가 높고 포인트 터널링이 지배적으로 나타난다. Hetero-TFET의 경우에 구동전류가 높게 나타나고 누설전류는 나타나지 않았으나 포인트 터널링이 지배적으로 나타난다. $HfO_2$를 산화막으로 사용한 Si-TFET의 경우에 라인 터널링의 문턱전압(threshold voltage)이 감소하여 라인 터널링만 나타난다. Ge과 Hetero-TFET의 경우에 포인트 터널링의 문턱전압이 감소하여 포인트 터널링에 의해 동작되며 Ge-TFET는 누설전류가 증가하였고, Hetero-TFET에서 Hump가 나타난다.

• 한국재료학회지
• /
• 제7권2호
• /
• pp.93-101
• /
• 1997

Lead titanate박막을 $Pt/Ti/SiO_{2}/Si(Pt/Ti기판)와\;Pt/Ta/SiO_{2}/SiO_{2}$Si(Pt/Ta 기판) 위에서 전자 사이크로트론 공명플라즈마 화학증착법(ECR PECVD)으로 증착하였다. 증착온도, 산소유입량, MO source유입비등의 증착변수에 따른 lead titanate박막의 조성과 미세구조를 주사전자현미경(SEM), 투과전자현미경(TEM), X선 회절법(XRD)으로 조사하였다. 산소유입량이 적을 경우,Tisource와 Pb source의 산소화의 반응성 차이 때문에 Pb 농도가 부족한 화학양론비가 잘 맞는 박막이 증착되었다. Pt/ti기판은 lead titanate박막증착도중 기판의 Ti층과 Pt층의 확산으로 기판변형이 발생하는 반면, Pt/Ta기판은 기판변형이 일어나지 않았다. Pt/Ta기판에서 페롭스카이트 화학양론비를 갖는 매우 평탄한 lead titanate박막을 증착 하였는데, 산소유입량이 lead titanate박막의 결정성을 크게 지배하였다.

• Journal of Electrochemical Science and Technology
• /
• 제3권2호
• /
• pp.72-79
• /
• 2012

$Li_2MnSiO_4$ was synthesized using the solid-state method under an Ar atmosphere at three different calcination temperatures (900, 950, and $1000^{\circ}C$). The optimization of the carbon coating was also carried out using various molar concentrations of adipic acid as the carbon source. The XRD pattern confirmed that the resulting $Li_2MnSiO_4$ particles exhibited an orthorhombic structure with a $Pmn2_1$ space group. Cyclic voltammetry was utilized to investigate the capacitive behavior of $Li_2MnSiO_4$ along with activated carbon (AC) in a hybrid supercapacitor with a two-electrode cell configuration. The $Li_2MnSiO_4$/AC cell exhibited a high discharge capacitance and energy density of $43.2Fg^{-1}$ and $54Whkg^{-1}$, respectively, at $1.0mAcm^{-2}$. The $Li_2MnSiO_4$/AC hybrid supercapacitor exhibited an excellent cycling stability over 1000 measured cycles with coulombic efficiency over > 99 %. Electrochemical impedance spectroscopy was conducted to corroborate the results that were obtained and described.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.116-117
• /
• 2006

I-D ZnO nanostructures were fabricated by thermal evaporation method on Si(100), GaN and $Al_2O_3$ substrates without a catalyst at the reaction temperature of $700^{\circ}C$. Only pure Zn powder was used as a source material and Ar was used as a carrier gas. The shape and growth direction of synthesized ZnO nanostructures is determined by the crystal structure and the lattice mismatch between ZnO and substrates. The ZnO nanostructure on Si substrate were inclined regardless of their substrate orientation. The origin of ZnO/Si interface is highly lattice-mismatched and the surface of the Si substrate inevitably has the $SiO_2$ layer. The ZnO nanostructure on the $Al_2O_3$ substrate was synthesized into the rod shape and grown into particular direction. For the GaN substrate, however, ZnO nanostructure with the honeycomb-like shape was vertically grown, owing to the similar lattice parameter with GaN substrate.

• 천문학회보
• /
• 제40권2호
• /
• pp.35.2-35.2
• /
• 2015

We present the results of simultaneous observations of the H2O and SiO masers emitted from the circumstellar envelopes (CSEs) of the late-type stars. These observations have been carried out at the four frequency bands (K, Q, W and D bands) using KVN to apply the source frequency phase referencing (SFPR) analysis to the maser lines. We obtain the relative positions between the H2O and the SiO maser spots by using the SFPR method, which are very important to study the physical links between the inner and the outer parts of the CSEs of the late-type stars. The relative positions between the SiO maser spots of the different transitions are also obtained very accurately, which are very crucial to investigate the pumping mechanism of the SiO maser lines. From our results, the capability of the simultaneous multi-band observation of KVN is proved to be powerful to study the complicated physical environments of the CSEs and the stellar evolution of the late-type stars.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.582-588
• /
• 2014

We study polarization-dependent spontaneous emission (SE) rate and light extraction efficiency (LEE) in localized-surface-plasmon (LSP)-coupled light emitting diodes (LEDs). The closely packed seven $Ag/SiO_2$ core-shell (CS) nanoparticles (NPs) lie on top of the GaN surface for LSP coupling with a radiated dipole. According to the dipole direction, both the SE rate and the LEE are significantly modified by the LSP effect at the $Ag/SiO_2$ CS NPs when the size of Ag, the thickness of $SiO_2$, and the position of the dipole source are varied. The enhancement of the SE rate is related to an induced dipole effect at the Ag, and the high LEE is caused by light scattering with an LSP mode at $Ag/SiO_2$ CS NPs. We suggest the optimum position of the quantum well (QW) in blue InGaN/GaN LEDs with $Ag/SiO_2$ CS NPs for practical application.