• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.6
• /
• pp.1994-2017
• /
• 2022

In view of the past, the mobility of the multicast source in the mobility networks is seldom discussed in the traditional multicast protocols. It is a heavy cost for the traditional multicast protocols to reconstruct the multicast tree in the Network Mobility (NEMO) environment. This article proposes an alternative multicast protocol, referred to as Mobility-Sensitive Multicast protocol (MSM), for the NEMO environment. The MSM can be considered as an alternative version of the Multicast Listener Discovery (MLD) protocol to maintain the multicast tree in the NEMO. There are two obvious contributions for the MSM. Reconstruct mechanism could rebuild the multicast tree for the mobility of the multicast source. Multi-group suppression mechanism reduce the multicast tree maintaining cost for the mobility of the multicast members. Through the performance evaluations and analyses, the MSM has less cost to maintain the multicast tree than the traditional multicast protocols, especially for a large numbers of multicast groups. Moreover, the MSM allows the mobility of the multicast source to reconstruct the multicast tree easily.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.1
• /
• pp.26-32
• /
• 1998

We have studied how the characteristics degradation between effective mobility and field effect mobility of gate channel in p-MOSFET's affects the gate channel length being follow by increased stress time and increased drain-source voltage stress. The experimental results between effective and field-effect mobility were analyzed that the measurement data are identical at the point of minimum slope in threshold voltage, the other part is different, that is, the effective mobility it the faster than the field-effect mobility. Also, It was found that the effective and field-effect mobility. Also, It was found that the effective and field-effect mobility of p-MOSFET's with short channel are increased by decreased channel length, increased stress time and increased drain-source voltage stress.

• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.144-156
• /
• 2005

Video streaming over wireless networks is challenging due to node mobility and high channel error rate. In this paper, we propose a multi-source video streaming (MUVIS) system to support high quality video streaming service over IEEE 802.1l-based wireless networks. We begin by collocating a streaming proxy with the wireless access point to help leverage both the media server and peers in the WLAN. By tracking the peer mobility patterns and performing content discovery among peers, we construct a multi-source sender group and stream video using a rate-distortion optimized scheme. We formulate such a multi-source streaming scenario as a combinatorial packet scheduling problem and introduce the concept of asynchronous clocks to decouple the problem into three steps. First, we decide the membership of the multisource sender group based on the mobility pattern tracking, available video content in each peer and the bandwidth each peer allocates to the multi-source streaming service. Then, we select one sender from the sender group in each optimization instance using asynchronous clocks. Finally, we apply the point-to-point rate-distortion optimization framework between the selected sender-receiver pair. In addition, we implement two different caching strategies, simple caching simple fetching (SCSF) and distortion minimized smart caching (DMSC), in the proxy to investigate the effect of caching on the streaming performance. To design more realistic simulation models, we use the empirical results from corporate wireless networks to generate node mobility. Simulation results show that our proposed multi-source streaming scheme has better performance than the traditional server-only streaming scheme and that proxy-based caching can potentially improve video streaming performance.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.3
• /
• pp.91-96
• /
• 2015

Recently, the 'mobility' is one of the essential item in the field of IT. This means that 'mobility' are good mediators to get collecting user's behavior and provide freedom of mobility service for user's. This paper is proposed a mobility process orchestration(MPO) model that provide multimedia to various devices. The orchestration model provides the structure and function that can be objectify a physical devices in a user's environment to provide orchestrated service of various devices to user using a concept of MSMP(Multi Source Multi Platform). Also, using the concept of Choreography can be extracted appropriate device of the various media formats for harmonious service.

• Journal of Communications and Networks
• /
• v.11 no.4
• /
• pp.337-349
• /
• 2009

In this paper, we introduce a novel mobility model for mobile sinks in which the sinks move towards randomly distributed destinations, where each destination is associated with a mission. The novel mobility model is termed the random mobility with destinations. There have been many studies on mobile sinks; however, they merely support two extreme cases of sink mobility. The first case features the most common and general mobility, with the sinks moving randomly, unpredictably, and inartificially. The other case takes into account mobility only along predefined or determined paths such that the sinks can gather data from sensor nodes with minimum overhead. Unfortunately, these studies for the common mobility and predefined path mobility might not suit for supporting the random mobility with destinations. In order to support random mobility with destination, we propose a new protocol, in which the source nodes send their data to the next movement path of a mobile sink. To implement the proposed protocol, we first present a mechanism for predicting the next movement path of a mobile sink based on its previous movement path. With the information about predicted movement path included in a query packet, we further present a mechanism that source nodes send energy-efficiently their data along the next movement path before arriving of the mobile sink. Last, we present mechanisms for compensating the difference between the predicted movement path and the real movement path and for relaying the delayed data after arriving of the mobile sink on the next movement path, respectively. Simulation results show that the proposed protocol achieves better performance than the existing protocols.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10A
• /
• pp.1004-1014
• /
• 2007

In sensor networks, it is crucial to reliably and energy-efficiently deliver sensed information from each source to a sink node. Specifically, in mobile sink (user) applications, due to the sink mobility, a stationary dissemination path may no longer be effective. The path will have to be continuously reconfigured according to the current location of the sink. Moreover, the dynamic optimal path from each source to the sink is required in order to reduce end-to-end delay and additional energy wastage. In this paper, an Adaptive Reversal Optimal path Tree (AROT) protocol is proposed. Information delivery from each source to a mobile sink can be easily achieved along the AROT without additional control overhead, because the AROT proactively performs adaptive sink mobility management. In addition, the dynamic path is optimal in terms of hop counts and the AROT can maintain a robust tree structure by quickly recovering the partitioned tree with minimum packet transmission. Finally, the simulation results demonstrate that the AROT is a considerably energy-efficient and robust protocol.

• Journal of information and communication convergence engineering
• /
• v.18 no.1
• /
• pp.22-27
• /
• 2020

Content centric networking (CCN) is regarded as promising internet architecture because it can provide network efficiency in terms of bandwidth consumption by separating contents from a specific network location and decrease network congestion events. However, the application of a CCN does not widely consider the side effects of mobile devices, particularly mobile content sources. For content source mobility, a full routing update is required. Therefore, in this study, a route optimization scheme is proposed for mobile content sources in a CCN environment to provide low communication overhead, short download time, and low resource consumption. The proposed scheme establishes a direct path between content requesters and a mobile content source for the exchange of interest and data packets using interest-piggybacked data packets. Based on the inherent CCN naming characteristics, the content source does not know the name prefix of the content consumer, and thus the proposed optimized CCN scheme utilizes the content router in the home domain of the content source.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.7
• /
• pp.433-438
• /
• 2015

Zinc tin oxide transparent thin film transistors (ZTO TTFTs) were fabricated by using $n^+$ Si wafers as gate electrodes. Indium (In), aluminum (Al), indium tin oxide (ITO), silver (Ag), and gold (Au) were employed for source and drain electrodes, and the mobility and the threshold voltage of ZTO TTFTs were observed as a function of electrode. The ZTO TTFTs adopting In as electrodes showed the highest mobility and the lowest threshold voltage. It was shown that Ag and Au are not suitable for the electrodes of ZTO TTFTs. As the results of this study, it is considered that the interface properties of electrode/ZTO are more influential in the properties of ZTO TTFTs than the conductivity of electrode.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.123-129
• /
• 1996

LDD structure is widely accepted in fabricating short channel MOSFETs due to reduced short channel effect originated form lower drain edge electric field. However, modeling of the LDD device is troublesome because the analysis methods of LDD region known are either too complicated or inaccurate. To solve the problem, this paper presents a nonlinear resistance model for the LDD region based on teh fact that the electron mobility changes with positive gate bias because accumulation layer of electrons is formed at the surface of the LDD region. To prove the usefulness of the model, single source/drain and LDD nMOSFETs were fabricated with 0.35$\mu$m CMOS technolgoy. For the fabricated devices we have measured I$_{ds}$-V$_{gs}$ characteristics and compare them to the modeling resutls. First of all, we calculated channel and LDD region mobility from I$_{ds}$-V$_{gs}$ characteristics of 1050$\AA$ sidewall, 5$\mu$m channel length LDD NMOSFET. Then we MOSFET and found good agreement with experiments. Next, we use calculated channel and LDD region mobility to model I$_{ds}$-V$_{gs}$ characteristics of LDD mMOSFET with 1400 and 1750$\AA$ sidewall and 5$\mu$m channel length and obtained good agreement with experiment. The single source/drain device characteristic modeling results indicates that the cahnnel mobility obtained form our model in LDD device is accurate. In the meantime, we found that the LDD region mobility is governed by phonon and surface roughness scattering from electric field dependence of the mobility. The proposed model is useful in device and circuit simulation because it can model LDD device successfully even though it is mathematically simple.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.9
• /
• pp.1375-1380
• /
• 1989

Mobility reduction parameters are extracted using a method based on the exploitatiion of Id-Vg and Gm-Vg characteristics of short channel n-MOSFETs in strong inversion region at room temperature. It is found that the reduction of the maximum field effect mobility, \ulcornerFE,max, with the channel length is due to i) the difference between the threshold voltage and the gate voltage which corresponds to the maximum transconductance, and ii) the channel length dependence of the mobility attenuation coefficient, \ulcorner The low field mobility, \ulcorner, is found to be independent of the channel length down to 0.25 \ulcorner ofeffective channel length. Also, the channel length reduction, -I, the mobility attenuation coefficient, \ulcorner the threshold voltage, Vt, and the source-drain resistance, Rsd, are determined from the Id-Vg and -gm-Vg characteristics n-MOSFETs.