• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.192-204
• /
• 2012

For a severe accident of nuclear power plant, an approach to estimation of the radiological source term using a severe accident code(MELCOR) has been proposed. Although the MELCOR code has a capability to estimate the radiological source term, it has been hardly utilized for the radiological consequence analysis mainly due to a lack of understanding on the relevant function employed in MELCOR and severe accident phenomena. In order to estimate the severe accident source term to be linked with the radiological consequence analysis, this study proposes 4-step procedure: (1) selection of plant condition leading to a severe accident(i.e., accident sequence), (2) analysis of the relevant severe accident code, (3) investigation of the code analysis results and post-processing, and (4) generation of radiological source term information for the consequence analysis. The feasibility study of the present approach to an early containment failure sequence caused by a fast station blackout(SBO) of a reference plant (OPR-1000), showed that while the MELCOR code has an integrated capability for severe accident and source term analysis, it has a large degree of uncertainty in quantifying the radiological source term. Key insights obtained from the present study were: (1) key parameters employed in a typical code for the consequence analysis(i.e., MACCS) could be generated by MELCOR code; (2) the MELOCR code simulation for an assessment of the selected accident sequence has a large degree of uncertainty in determining the accident scenario and severe accident phenomena; and (3) the generation of source term information for the consequence analysis relies on an expert opinion in both areas of severe accident analysis and consequence analysis. Nevertheless, the MELCOR code had a great advantage in estimating the radiological source term such as reflection of the current state of art in the area of severe accident and radiological source term.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.4
• /
• pp.200-206
• /
• 2014

Accountable Internet Protocol (AIP) is one of the future Internet architectures to provide accountability concept by using the self-certifying address that is derived by the public key of the host. In AIP, when a host sends a packet, a domain that is located between the source and the destination hosts discards the packet in order to verify the source IP address. Therefore, performance degradation can occur due to packet discard especially when there is asymmetric route. In this paper, we propose the improved AIP mechanism to verify the source IP address without discarding the packet by including the timestamp, public key value and the signature for protecting from forfeiting the source address. Security safety of the proposed mechanism is evaluated and the proposed mechanism can provide the more robust security as well as reducing the latency due to discarding packets.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.970-981
• /
• 2016

Leakage currents occur in pulse-width-modulated voltage source inverter (PWM-VSI)-fed permanent magnet synchronous motor (PMSM) drives for air-conditioners, which seriously affect system safety and operation performance. High accuracy modeling and prediction of leakage currents are key issues for the design and implementation of air-conditioning products. In this study, the generation mechanism of leakage currents is discussed. A systematic modeling approach of leakage currents is proposed, including the modeling of leakage current sources and leakage current paths. By using the proposed approach, the complete model of leakage currents in PWM-VSI-fed PMSM drives for air-conditioners has been developed based on the extraction of all parameters. A comparison between the simulated leakage currents based on the developed model and measured leakage currents in the outdoor unit of an air-conditioning product is conducted. The comparison verifies the effectiveness of the proposed modeling approach, and the developed model exhibits high accuracy within a wide frequency range.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.549-559
• /
• 2019

This paper proposes an adaptive sliding mode control (ASMC) strategy with an enhanced optimal reaching law (EORL) for the robust current tracking control of the boost converter based hybrid power source (HPS) in an electric vehicle (EV). A conventional ASMC strategy based on state observers and the hysteresis control method is used to realize the current tracking control for the boost converter based HPS. Then a novel enhanced exponential reaching law is proposed to improve the ASMC. Moreover, an enhanced exponential reaching law is optimized by particle swarm optimization. Finally, the adaptive control factor is redesigned based on the EORL. Simulations and experiments are established to validate the ASMC strategy with the EORL. Results show that the ASMC strategy with the EORL has an excellent current tracking control effect for the boost converter based HPS. When compared with the conventional ASMC strategy, the convergence time of the ASMC strategy with the EORL can be effectively improved. In EV applications, the ASMC strategy with the EORL can achieve robust current tracking control of the boost converter based HPS. It can guarantee the active and stable power distribution for boost converter based HPS.

• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.994-1005
• /
• 2015

This paper presents a novel power control strategy for PWM current-source rectifiers (CSRs) in the stationary frame based on the instantaneous power theory. In the proposed control strategy, a virtual resistance based on the capacitor voltage feedback is used to realize the active damping. In addition, the proportional resonant (PR) controller under the two-phase stationary coordinate is designed to track the ac reference current and to avoid the strong coupling brought about by the coordinate transformation. The limitations on improving steady-state performance of the PR controller is investigated and mitigated using a cascaded lead-lag compensator. In the z-domain, a straightforward procedure is developed to analyze and design the control-loop with the help of MATLAB/SISO software tools. In addition, robustness against parameter variations is analyzed. Finally, simulation and experimental results verify the proposed control scheme and design method.

• Nuclear Engineering and Technology
• /
• v.42 no.4
• /
• pp.394-413
• /
• 2010

The object of this paper is to identify the key elements that impact a radiation dose at EAB (Exclusion Area Boundary). This study is based on the AST (Alternative Source Terms) as defined in Regulatory Guide 1.183. The LOCA (Loss of Coolant Accident) and the LRA (Locked Rotor Accident) are selected as limiting cases. A sensitivity analysis of accidental behavior with respect to various parameters during LOCA and LRA at Kori Unit 1 is also undertaken for the following objectives: to determine the limiting parameters, to find the impact trend of the radiation dose, and to find the safety margin between AST and TID (Technical Information Document) methodologies. This work confirms that key parameters are particulate removal rate, decontamination factor, iodine chemical form, gap fraction, partitioning factor, and the impact of isotopes group. Comparing TID with AST, the radiation dose of TID is about 80% greater than that of AST under a LOCA, and about 60% greater than that of AST for the case of a LRA; thus the safety margin is remarkably increased when the AST is used. In this work, the sensitivity analysis results are presented in terms of a sensitivity index called the "NDD (Normalized Dose Difference)", which compares the impact of parameters with that of a reference case. These values are derived by using a combination of the leak rate (primary to secondary), iodine chemical form, gap fraction, partitioning factor, spray removal rate, source term, and other variables.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.2
• /
• pp.136-141
• /
• 2005

The capability of utilizing a TCA cycle intermediates as the sole carbon source by the multi-vitamin auxotrophic yeast Torulopsis glabrata CCTCC M202019 was demonstrated with plate count method. It is indicated that T. glabrata could grew on a medium with one of the TCA cycle intermediates as the sole carbon source, but more colonies were observed when glucose, acetate and one of the TCA cycle intermediates coexisted in the medium. Among the intermediates of the TCA cycle examined in this study, cell growth was improved by supplementing oxaloacetate. Further investigation showed that the presence of acetate was necessary when oxaloacetate was supplemented. By supplementing with 10 g/L of oxaloacetate in pyruvate batch fermentation, dry cell weight increased from 11.8 g/L to 13.6 g/L, and pyruvate productivity was enhanced from $0.96\;gL^{-1}h^{-1}\;to\;1.19 gL^{-1}h^{-1}$ after cultivation of 56 h. The yield of pyruvate to glucose was also improved from 0.63 g/g to 0.66 g/g. These results indicate that under vitamins limitation, the productivity and yield of pyruvate could be enhanced via an increase of cell growth by the supplementation of oxaloacetate.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.5
• /
• pp.113-124
• /
• 2010

In this study, the hybrid authorization quotation technique is based on the device ID for the integrity of the source region guarantee of user certificate, in order to improve the convenience and security for user in the hybrid PKI certificate Mechanism for authentication. The feature of the model in which it is presented from this paper is 5. First, because the user can select the policy himself in which it matches with each authentication situation and security level, the convenience can be improved. Second, the integrity of the source region of the user certificate can be guaranteed through the comparison of the DLDI Key, that is the hash-value of the device ID. Third, the security can be improved by continuously changing an encoding, and the value of the key in which it decodes through the EOTP Key. Fourth, the index value is added to a certificate, and the storage of a certificate is possible at the Multi-Device. Fifth, since the addi the inan aratus for the integrity of the source region guarantee of a certificate is not needed, the authentication process time can be reduced and the computational load of the certificate server can be reduced also.

• Journal of the Korean Vacuum Society
• /
• v.4 no.S2
• /
• pp.75-78
• /
• 1995

Gas source molecular beam epitaxy have been used in the growth of InAlAsAnGaAs MSM-PD structure, in which InAlAs ultra thin layer was used as Schottky barrier enhancement material. High performance MSM-PDs have been constructed on the grown wafer. High breakdown voltage of >30V, low dark current density of $3pA/\mu \textrm{cm}^2$ at 10V bias and fast transient response of <20ps rise time / <40ps FWHM have been measured, which confirm the results that GSMBE is a superior method for the growth of materials with high layer and interfacial quality, especially for InP based InAIAdInGaAs system.

• BMB Reports
• /
• v.41 no.1
• /
• pp.79-85
• /
• 2008

The source of nitric oxide (NO) in plants is unclear and it has been reported NO can be produced by nitric oxide synthase (NOS) like enzymes and by nitrate reductase (NR). Here we used wild-type, Atnos1 mutant and nia1, nia2 NR-deficient mutant plants of Arabidopsis thaliana to investigate the potential source of NO production in response to Verticillium dahliae toxins (VD-toxins). The results revealed that NO production is much higher in wild-type and Atnos1 mutant than in nia1, nia2 NR-deficient mutants. The NR inhibitor had a significant effect on VD-toxins-induced NO production; whereas NOS inhibitor had a slight effect. NR activity was significantly implicated in NO production. The results indicated that as NO was induced in response to VD-toxins in Arabidopsis, the major source was the NR pathway. The production of NOS-system appeared to be secondary.