• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.203-204
• /
• 2019

Recently, the number of conflicts and complaints related to noise between floors is increasing every year. It is essential to acquisition objective noise data in order to resolve legal disputes over floor noise. However, specialized equipment for noise acquisition is difficult for ordinary apartment dwellers to use. In addition, in order to solve the problem of inter-layer noise, it is most effective to locate and remove the noise. Therefore, this study proposes a floor noise monitoring system for the measurement of floor noise and estimation of the noise source that can be measured without a professional device.

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.258-263
• /
• 2019

Some animals have special sensing functions in order to find foods, home and mates. Instead of passively sensing, they discharge signals and then extract necessary information from the response. More importantly, they utilize the gradients of the sensed signal in order to find the destination or objects. In this paper this special strategy is formulated mathematically, i.e., the perturbation and the correlation based gradient estimation is developed. A stereo sensor system using temperature sensors mounted on motors is developed for verification. The proposed method can estimate the gradient of the measured value accurately. Using this method, the direction in the maximum measured value can be estimated accurately, and the position of the heat source can be estimated from the intersection of the directions estimated from both sensors.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.133-136
• /
• 1998

The aim of the work described in this paper is to develop a complex underground acoustic system which detects and locates the origin of an underground hammering sound using an array of six hydrophones located about 100m underground. Two different methods for the sound localization will be presented, a time-delay method and a power-attenuation method. In the time-delay method, the cross correlation of the signals received from the array of sensor sis used to calculate the time delays between those signals. In the power-attenuation method, the powers of the received signals provide a measure f the distances of the source from the sensors.

• Publications of The Korean Astronomical Society
• /
• v.20 no.1 s.24
• /
• pp.49-53
• /
• 2005

We are often faced with the task of having to estimate the amplitude of a source signal in the presence of a background. In the simplest case, the background can be taken as being flat, and of unknown magnitude B, and the source signal of interest assumed to be the amplitude A of a peak of known shape and position. We present a robust method to find the most probable values of A and B by applying the one-dimensional Newton-Raphson method. In the derivation of the formula, we adopted the Bayesian statistics and assmumed Poisson distribution so that the results could be applied to the analysis of very weak signals, as observed in FIMS (Far-ultraviolet IMaging Spectrogaph).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.2
• /
• pp.195-201
• /
• 2001

An inverse heat conduction problem(IHCP) arises when unknown heat fluxes and whole temperature field are to be found with temperature measurements of a few points. In this paper, observers are proposed as solution algorithm for the IHCP. A 1-dimensional heat transfer problem is modeled with modal analysis and state space equations. Position of the heat source is estimated through test heat inputs and the autocorrelation among a few of temperature data. The modified Bass-Gura method is used to design a state observer to estimate the intensity of heat source and the whole temperature field of a 1-dimensional body. To verify the reliability of this estimator, analytic solutions obtained from the proposed method are compared.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.10
• /
• pp.947-954
• /
• 2012

Sand scorpions are nocturnal animals to mostly use tactile senses to detect their prey. It has been reported that sand scorpions have high vibration sensitivity for their prey-localizing behavior. We tested vibration experiments in the sand with microphone sensors to model the sand scorpion's behavior and a time-difference model was applied to find the direction of a vibration source. Using the information of the arrival time of the vibration signal to reach each leg position, we can find the location of the vibration source.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.66-70
• /
• 2005

Noise prediction are required as part of an environmental impact assessment. Prediction method that is used to domestic environmental impact assessment of construction site and industrial site is not applied work operation rate, work position, moving noise source, inner traffic flow, work type and height of noise source etc. The BS5228 methodology is used mainly for assessment of proposed open industrial sites(mineral extraction, landfill etc.), and larger long-term construction sites(typically for major infrastructure projects). also, estimation which consider various effect factor is possible.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.2E
• /
• pp.10-17
• /
• 1999

The aim of the work described in this paper is to develop a complex underground acoustic system which detects and localizes the origin of an underground hammering sound using an array of hydrophones located about 100m underground. Three different methods for the sound localization will be presented, a time-delay method, a power-attenuation method and a hybrid method. In the time-delay method, the cross correlation of the signals received from the array of sensors is used to calculate the time delays between those signals. In the power-attenuation method, the powers of the received signals provide a measure of the distances of the source from the sensors. In the hybrid method, both informations of time-delays and power-ratios are coupled together to produce better performance of position estimation. A new acoustic imaging technique has been developed for improving the hybrid method. This new acoustic imaging method shows the multi-dimensional distribution of the normalized cost function, so as to indicate the trend of the minimizing direction toward the source location. For each method the sound localization is carried out in three dimensions underground. The distance between the true and estimated origins of the source is 28m for a search area of radius 250m.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.206-221
• /
• 2019

Source localization in three-dimensional (3-D) wireless sensor networks (WSNs) is becoming a major research focus. Due to the complicated air-ground environments in 3-D positioning, many of the traditional localization methods, such as received signal strength (RSS) may have relatively poor accuracy performance. Benefit from prior learning mechanisms, fingerprinting-based localization methods are less sensitive to complex conditions and can provide relatively accurate localization performance. However, fingerprinting-based methods require training data at each grid point for constructing the fingerprint database, the overhead of which is very high, particularly for 3-D localization. Also, some of measured data may be unavailable due to the interference of a complicated environment. In this paper, we propose an efficient kernel based 3-D localization algorithm via tensor completion. We first exploit the spatial correlation of the RSS data and demonstrate the low rank property of the RSS data matrix. Based on this, a new training scheme is proposed that uses tensor completion to recover the missing data of the fingerprint database. Finally, we propose a kernel based learning technique in the matching phase to improve the sensitivity and accuracy in the final source position estimation. Simulation results show that our new method can effectively eliminate the impairment caused by incomplete sensing data to improve the localization performance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.415-421
• /
• 2009

TOA(time-of-arrival) and TDOA(time-difference-of-arrival) positioning techniques are commonly used in many radio-navigation systems. From the literature, it is known that the position estimate and error covariance matrix of TDOA obtained by GN(Gauss-Newton) method is exactly the same as that of TOA when the error source of the range measurement is only an IID white Gaussian noise. In case of geo-location and indoor positioning, however, multi-path or NLOS(non-line-of-sight) error is frequently appeared in range measurements. Though its occurrence is random, the multipath acts like a bias for a stationary user if it occurs. This paper presents the comparisons of error characteristics between TOA and TDOA positioning in presence of multi-path or NLOS error. It is analytically shown that the position estimate of TDOA is exactly the same as that of TOA even when bias errors are included in range measurements with different magnitudes. By computer simulation, position estimation error and error distribution are analyzed in presence of range bias errors.