• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.222-228
• /
• 1999

The two-microphone sound-intensity technique has been used for the detection of defects in radially loaded ball bearings. The difference in the sound-intensity levels measured for bearings with no defect and for those with intentionally introduced defects of different sizes in their elements under various operating conditions of loads and speeds is demonstrated. A change in the intensity frequency spectrum because of the defects is observed. The results show that the detectability of an outer-race defect is much better than that of on inner-race or ball defect. It is difficult to detect defects at lower speeds. Sound-pressure measurements were also performed fur comparison, and it is shown that the detectability of defects by sound-intensity measurements is better than that by sound-pressure measurements.

• English Language & Literature Teaching
• /
• v.13 no.2
• /
• pp.129-153
• /
• 2007

When English language teachers are deciding on their priorities for teaching pronunciation, it is imperative to know what kind of differences and errors are most likely to interfere with communication, and what special problems particular first-language speakers will have with English pronunciation. In other words, phoneme discrimination skill is an integral part of speech processing for the EFL learners' learning to converse in English. Training using sound visualization technique can be effective in improving second language learners' perceptions and productions of segmental and suprasegmental speech contrasts. This study assessed the efficacy of a pronunciation training that provided visual feedback for EFL learners acquiring pitch and durational contrasts to produce and perceive English phonemic distinctions. The subjects' ability to produce and to perceive novel English words was tested in two contexts before and after training; words in isolation and words in sentences. In comparison with an untrained control group, trainees showed improved perceptual and productive performance, transferred their knowledge to new contexts, and maintained their improvement three months after training. These findings support the feasibility of learner-centered programs using sound visualization technique for English language pronunciation instruction.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.128-134
• /
• 2004

This paper presents a result of sound transmitting system with power line communication technique. Sound transmitting system is a transmitter which transmits modulated audio signal to power to power line and receiver which is capable of detecting it with earphone or speaker. It has been evaluated with the frequency characteristics and spectrum analysis. And, from the result of evaluation on the developed system, we confirmed the superior sound transmitting characteristics, and the possibility of application on a language laboratory.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.1
• /
• pp.82-92
• /
• 2021

Nakdong technique is an unfamiliar scorching treatment using an iron heated in a kiln over 1000℃. It is a typical convention in Asian countries to treat Nakdong on the surface of paulownia species. The scorching treatment changes the surface characteristics as well as the color of the wood. This study focused on the effects of functional features such as water resistance, anti-mold, anti-termite, and sound improvement because this treatment is usually used on paulownia wood-bodied musical instruments surface. It took 28'57" for Nakdong-iron treated surface to absorb a droplet of water. The absorbance time of iron treated surface was longer than that of torch treated one. There was no noticeable effect on the anti-mold test. On the anti-termite test, there was nearly 3% more mean mass loss on the torch samples than controlled and iron treated ones. In examining the sound radiation coefficient before and after Nakdong treatment, the Nakdong-iron treated surface showed an increase in the average value of 1.2 m4/kg s, which means that it has sound quality improvement. Through this research, the Nakdong technique results are expected to be used as basic-data for further research and give a practical idea for using the traditional treatment method on the wood surface.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.80.2-80
• /
• 2002

The problem of sound source localization is to determine the position of sound sources using the measurement of the acoustic signals received by microphones. To develop a good sound source localization system which is applicable to a mobile platform such as robots, a time delay estimator with low computational complexity and robustness to background noise or reverberations is necessary. In this paper, an explicit adaptive time delay estimation method for a sound source localization system is proposed. Proposed explicit adaptive time estimation algorithm employs direct adaptation of the delay parameter using a transform-based optimization technique, rather than...

• Textile Coloration and Finishing
• /
• v.23 no.4
• /
• pp.304-311
• /
• 2011

For sound absorption and sound insulation in automobile industry, the sound absorption materials based on meltblown nonwovens were prepared by SMS (spunbond-meltblown-spunbond) technique. And the sound absorption coefficient (${\alpha}$) of the meltblown nonwoven, produced with isotatic-polypropylene(PP), was examined for the various processing conditions such as die-to-collector distance(DCD), nonwoven weight(GSM), and air suction conditions. The meltblown nonwoven for sound absorption materials was composed of bulky microfiber web, increasing with increases in weight and DCD. The sound absorption coefficient(${\alpha}$) was excellent as a sound absorption materials of PAD type composed of SMS(spunbond-meltblownspunbond) nonwovens.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.5
• /
• pp.11-19
• /
• 1995

The Interaction between tire and road is responsible for the excited vibration of the tire, and It is also important for the sound radiation. In this paper. measurement of tire structural vibration noise from a chassis dynamometer using Spatial Transformation of Sound Field(STSF) technique is studied. STSF involving a scan that uses an array of transducers over a planar surface close to the source is under investigation. From cross spectra measurement during the scan, a principal component representing the sound field is extracted. Any power descriptor of the near field can then be investigated by means of near-field acoustic holography, while the distant field can be determined by application of Helmholtz integral equation. The results of the measurement were used to obtain the radiation sound pattern from the center line of the tire, and to locate the radiation sound generating regions in the vicinity of the tire.

• International journal of advanced smart convergence
• /
• v.9 no.2
• /
• pp.20-27
• /
• 2020

Sound event detection in real-world environments suffers from the interference of non-stationary and time-varying noise. This paper presents an adaptive noise reduction method for sound event detection based on non-negative matrix factorization (NMF). In this paper, we proposed a deep learning model that integrates Convolution Neural Network (CNN) with Non-Negative Matrix Factorization (NMF). To improve the separation quality of the NMF, it includes noise update technique that learns and adapts the characteristics of the current noise in real time. The noise update technique analyzes the sparsity and activity of the noise bias at the present time and decides the update training based on the noise candidate group obtained every frame in the previous noise reduction stage. Noise bias ranks selected as candidates for update training are updated in real time with discrimination NMF training. This NMF was applied to CNN and Hidden Markov Model(HMM) to achieve improvement for performance of sound event detection. Since CNN has a more obvious performance improvement effect, it can be widely used in sound source based CNN algorithm.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.6 s.111
• /
• pp.565-573
• /
• 2006

Acoustic analysis of a moving sound source required that the measured sound signals be do-Dopplerized and restored as of the original emission signals. The purpose of this research is development of beamforming technique can be applied to the rotor noise source identification. For the do-Dopplerization and reconstruction of emitted sound wave, Forward Propagation Method is applied to the time domain beamforming technique. And validation test were performed using rotating sound source constructed by bended pipe and horn driver. In the validation test using sinusoidal sound wave, sufficient performance of signal processing can be seen, and the effect of measuring duration for accuracy was compared. In the prop-rotor measurements, the acoustic source locations were successfully verified in varying positions for different frequencies and collective pitch angle, in hover condition.

• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.457-466
• /
• 1997

The experimental and analytical study was conducted to determine the noise transmission characteristics of acoustically loaded steel plate of rectangular enclosure and to investigate the sound radiation characteristics through out the enclosure. The vibrations of acoustically loaded plate give rise to sound radiations and generate the reverberant space that the sound field exists very close to a vibrating plate. Acoustic transmission loss is measured from the incident intensity into the plate and the transmitted intensity through out the plate. Sound radiation patterns are measured from both acoustic intensity technique and surface intensity technique. Those resultant patterns and vibrational modes are vital in understanding the relations between vibration and noise in the near field out of vibrating plate.