• 한국음향학회지
• /
• 제37권5호
• /
• pp.349-355
• /
• 2018

실내의 음향 특성을 기술하고 평가하기 위한 많은 파라미터들이 있다. 잔향 시간은 콘서트 홀, 극장, 스튜디오 등에서 중요한 특성이다. 오랫동안 잔향 시간을 계측하는 많은 방법들이 개발되어 왔고, 가장 일반적인 것은 단속적인 잡음 방법, 임펄스 응답 적분 방식, 임펄스성 음원에 대한 실내 응답 녹음 방법들이 있다. 그러나 잔향 시간은 측정 방법과 사용하는 음원과 마이크로폰에 따라서 달라지므로 정확한 잔향 시간을 구하기 어렵다. 본 논문에서는 잔향 시간의 해석 방법을 분석하고, 한계점에 대해서 검토한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권5호
• /
• pp.623-628
• /
• 2006

Laser material processing is a very fast advancing technology for various industrial applications. because of many advantages. Its major advantage of less and controlled heat input has been exploited successfully for the very critical application of aluminium alloy welding. This study suggested the occurrence source of weld-defects and its solution methods in a welding of lithium ion battery by pulsed Nd:YAG laser. In experiment. battery case has changed over joint geometry from welding of side position to flat one. In the case of a electrolyte injection hole in order to seal it. welding is carried out after pressing Al ball. At this time. an eccentric degree. contact length and gap are worked as a major parameters. As improving the method of Al ball pressing. it was able to reduce an eccentricity. increase the contact length and decrease gap. As a results of a experiment. a sound weld bead shape and crack-free weld bead can be obtained.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.339-343
• /
• 2005

Laser material processing is a very fast growing technology for various industrial applications, because of many advantages. Its major advantage of less and controlled heat input has been exploited successfully for the very critical application of aluminium alloy welding. This study suggested the occurrence source of weld-defects and its solution methods in a welding of lithium ion battery by pulsed Nd:YAG laser. In experiment, battery case has changed over joint geometry from welding of side position to flat one. In case of a electrolyte injection hole in order to seal it, welding is carried out after pressing Al ball. At this time, an eccentric degree, contact length and gap are worked as a major parameters. As improving the method of Al ball pressing, it was able to reduce an eccentricity, increase the contact length and decrease gap. As a results of a experiment, a sound weld bead shape and crack-free weld bead can be obtained.

• 유기물자원화
• /
• 제8권1호
• /
• pp.60-68
• /
• 2000

바이오필터 기술은 수백 ppmC의 저농도 배가스를 처리하는 데에 있어 효과적이며, 비용이 저렴하고 환경적으로 건전한 처리방법이다. 적용범위로는 폐수처리장, 퇴비화시설, 음식물가공공장에서 발생되는 악취를 비롯하여 매립지가스 및 토양증기추출(SVE, soil vapor extraction)시 발생되는 휘발성 배가스의 처리등이 있다. 바이오필터 기술을 효과적으로 적용하기 위해서는 문헌연구를 꼼꼼하게 실시 한 후 실험실규모, 파일롯트규모, 그리고 현장규모로 점차 확대하여 실시하는 것이 바람직하다. 본고에서는 바이오필터 기술의 원리, 설계인자, 운전조건, 적용사례, 그리고 경제성 평가를 중심으로 고찰하였다.

• 환경영향평가
• /
• 제19권6호
• /
• pp.591-605
• /
• 2010

Cool roofs are currently being emerged as one of important mechanism to save energy in relation to the building. This paper reviews worldwide experiences (USA, Japan and EU etc) for the potential benefits cool roofs offer in relation to building energy saving for comparison purposes. It is confirmed that there is a significant potential to the energy saving by introducing the cool roof in a Korean climate because of similarity in terms of HDD (Heating Degree Day) and CDD (Cooling Degree Day) as those countries reviewed. Such a comparative study highlights that the type of measurements performed and the quantitative parameters reported from the countries should be standardized in Korean context in order to implement further comparable experiments for scientifically sound investigations. It is anticipated that this research output could be used as a valuable reference in implementing a Nation-wide cool roofing strategy in the central and local governments since a suitable technical, more objective direction has been proposed based on the measured, fully quantitative performance of the involved components of a cool roof system in the global context. From this critical review, a very important step has been made concerning the practicality of cool roof in Korean context. Ultimately, the suggestion in this paper will greatly contribute to opening new possibilities for introducing cool roof in this country, proposed as an initial aim of this paper.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.588-593
• /
• 2011

The Main design parameters of ship HVAC systems are pressure drop and noise analysis of ducts. The Noise prediction for HVAC(Heating, Ventilating and Air Conditioning) systems are normally performed by empirical method suggested by NEBB(National Environmental Balancing Bureau, 1994), but NEBB's method is not suitable for the ship HVAC systems. In this paper, numerical analysis methods are used to develop a noise prediction method for the ship HVAC systems, especially for large ducts. To develop regression formula of attenuation of sound pressure level in large duct, Boundary Element Method(BEM) is used. Using dynamic loss coefficient which is suggested by ASHRAE fitting data base and numerical methods of HVAC noise analysis, integrated HVAC noise analysis of Program is developed. The developed program can present pressure drop and noise analysis of the ship HVAC systems. To verify the accuracy and convenience of the developed program, prediction of HVAC system for Semi-Submersible Drilling RIG is carried out and the results are compared with measurement of noise level during sea trial.

• Journal of Welding and Joining
• /
• 제33권1호
• /
• pp.54-60
• /
• 2015

Laser-arc hybrid welding has been considered as an effective pipe girth welding process since early 2000's. Tolerance for fit-up offsets such as gap and edge misalignment is one of most important requirements in pipe girth laser-arc hybrid welding, and several approaches using parameter optimization, a laser beam scanning and an arc oscillation have been tried. However the required offset tolerance has not been fully accomplished up to now and laser-arc hybrid welding has not been widely applied in pipeline construction than expected, despite of its high welding speed and deep penetration. In this study, internal welding was adopted to ensure the offset tolerance and sound back bead. The effect of welding parameters on bead shape was investigated at the flat position. Also tolerances for gap and edge misalignment were verified as 0.5 mm and 2.0 mm, respectively. The position welding trials were conducted at several welding positions from the flat to the overhead position in a downward direction. With the fixed welding speed, arc current for gas metal arc welding current and laser output power, adequate welding voltages for gas metal arc welding were suggested for each position.

• 한국소음진동공학회논문집
• /
• 제17권2호
• /
• pp.168-176
• /
• 2007

The mixture sound speed in bubbly fluids is highly dispersive due to differences of the density and compressibility between bubbles and fluids. The dispersion range in bubbly fluids expands to a higher frequency than the resonance frequency of an air bubble. A theoretical model was developed to compute the reduction of radiation noise that is generated by a force applied on an infinite flat plate using a bubble layer as a compliant baffle. For evaluating the effectiveness of a bubble layer in reducing the structure-borne noise of an infinite elastic plate, the noise reduction levels for various parameters such as the thickness of bubble layers, the volume fractions and the distribution types of bubbly fluids are calculated numerically. The noise reduction effect of an air bubble layer on an infinite flat plate is considerable level and similar to the tendency of dispersion of bubbly fluids. It is recommended that the thickness of a bubble layer should be increased with keeping an appropriate volume fraction of an air bubble for the most effective reduction of the radiation noise.

• Fisheries and Aquatic Sciences
• /
• 제11권2호
• /
• pp.113-123
• /
• 2008

We modeled fish school movements as a capture process in relation to the purse seine method using the three steps of the stimulus-response process (i.e., input stimuli, central decision-making and output reaction). Input stimuli of the model were categorized as either physical stimuli such as visual stimulus, sound stimulus, water flow, and weather or as biological stimuli such as species and size, swimming performance, sensual sensitivity, and presence of prey or predators. The output process determining the spatial orientation of the fish school for 3-D movements was based on swimming speed and angular change in the fish response, and these movements were animated as the relative geometry between the fish school and the purse seine. Simulations were carried out for skipjack tuna (Katsuwonus pelamis) schools reacting to a pelagic purse seine in the southwest Pacific Ocean. Simulation results showed that escape ratios varied from 20 to 70% by the relevant ranges in the stimulus-response thresholds, swimming speeds, and angular changes of fish schools were similar to those observed in the field. Therefore, with knowledge of relevant parameters, this model can be used to predict capture and escape probabilities of purse seine operations for different fish species or conditions.

• 음성과학
• /
• 제4권2호
• /
• pp.69-89
• /
• 1998

The aim of this study is to develop an objectively method of speech evaluation for children with cleft palates. To assess velopharyngeal function, Visi-Pitch, Computerized Speech Lab. (CSL), Nasometer and Palatometer were used for this study. Acoustic parameters were measured depending on the diagnostic instruments: Pitch (Hz), sound pressure level (dB), jitter (%) and diadochokinetic rate by Visi-Pitch, VOT and vowels formant ($F_1\;&\;F_2$) by a Spectrography and the degree of hypernasality by Nasometer. In addition, Palatometer was used to find the lingual-palatal patterns of cleft palate. Ten children with cleft palates and fifty normal children participated in the experiment. The results are as follows: (1) Higher nasalance of children with cleft palates showed the resonance disorder. (2) The cleft palate showed palatal misarticulation and lateral misarticulation on the palatogram. (3) Children with cleft palates showed the phonatory and respiratory problems. The duration of sustained vowels in children with cleft palates was shorter than in the control groups. The pitch of children with cleft palates was higher than in the control groups. However, intensity, jitter and diadochokinetic rate of children with cleft palates were lower than in the control group. (4) On the Spectrogram, the VOT of children with cleft palates was longer than control group. $F_1\;&\;F_2$ were lower than in the control group.