• Journal of the Korean Institute of Educational Facilities
• /
• v.28 no.3
• /
• pp.3-14
• /
• 2021

Speech information of teachers is transmitted to students in classrooms so that appropriate aural environment should be provided for academic purposes. Many researches have been undertaken for classroom acoustics, and acoustic standards of domestic classrooms were suggested based on the reverberation time and background noise level. However, these standards are suitable for middle and high schools and so not consider the auditory ability by ages. As a precedent research, the present study was begun to suggest an acoustic standard for lower grade elementary school classrooms with children under age 9 who have not normal auditory ability. In order to do this, acoustic performances of the lower grade classrooms were measured and compared with the general classrooms. Also, change of acoustic parameters depending on the desk layout was measured and analyzed. The measured acoustic parameters were background noise, signal to noise ratio, RT, STI, D₅₀, and IACC. As a result, it was found that background noise is exceed the standard of 35dB(A) at the schools along the road sides. Also, it was shown that most of acoustic parameters are higher in the classrooms built recently rather than the old classrooms. Generally, there are not much difference of acoustic parameters among the various desk layouts but, better acoustic performances are acquired at the center line and the seats near sound source. Also, Higher IACC was measured at the seats on the center line facing the source squarely.

• Journal of Korea Foundry Society
• /
• v.42 no.1
• /
• pp.3-11
• /
• 2022

In this study, the parameters on the shrinkage defect of HR3C alloy was secured through computer simulation research, and the ingot mold with greater than 85% of sound area was designed and manufactured. Moreover, the optimized coagulation was proposed at design stage through computer simulation and test was performed upon ingot manufactured. After the test, the defect pattern was analyzed through cutting and non-destructive inspection to verify the parameter and ingot mold design. Based on the verification results, shrinkage defect parameters such as Niyama, Feed Efficiency, and Hot Tear Intensity of HR3C Alloys were obtained. In addition, through the secured parameters, a plan for designing ingot mold with a Non-defect area of 85% or more was secured.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.7
• /
• pp.599-609
• /
• 2009

An overview of the recently finalized multi-channel audio coding standard MPEG Surround is provided. This audio coding standard downmixes multi-channel signals to mono or stereo signals and, simultaneously, extracts spatial parameters for its encoding process. In its decoding process, it reconstructs multi-channel signals based on the downmix signals and spatial parameters. Since the downmix signals are coded in conventional audio coding format such as AAC and MP3 and the spatial parameters require a small amount of information MPEG Surround guarantees high sound quality multi-channel audio at low bit rates. Besides, it is backward-compatible to conventional audio coding techniques because the downmix signals can be played on portable audio devices ignoring the spatial parameter information. In this paper, Part 1 presents an overview of the basic structure of MPEG Surround and Part 2 describes various modes and tools including the binaural mode which supports the virtual 5.1-channel playback via headphones or earphones. The listening test results by various companies and organizations are also presented.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.26-29
• /
• 2008

Recently, the hydroforming of high strength aluminum tubes has many studies and applications in manufacturing industry, especially in automotive industry. But high strength aluminum tube has limited expansion capability at most 15% at normal temperature. New manufacturing process, called hot air forming, is introduced to apply aluminum tube to the automotive sub frame components which have complex shape and require high expansion ratio about 40%. The process is carried out at the elevated temperature above $500^{\circ}C$, so numerous material properties and process parameters related to high temperature should be investigated and determined to get a sound product. In this paper, the hot air forming process of automotive sub frame was investigated. The effect of the forming parameters such as the temperature of tool, axial feeding and gas pressure are analyzes by using explicit finite element method.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.4
• /
• pp.13-23
• /
• 2007

This paper focuses on providing a practical approach for decision making in Performance-Based Design (PBD). Satisfactory performance is defined by several performance objectives that place limits on direct (monetary) loss and on a tolerable probability of collapse. No specific limits are placed on conventional engineering parameters such as forces or deformations, although it is assumed that sound capacity design principles are followed in the design process. The proposed design procedure incorporates different performance objectives up front, before the structural system is created, and assists engineers in making informed decisions on the choice of an effective structural system and its stiffness (period), base shear strength, and other important global structural parameters. The tools needed to implement this design process are (1) hazard curves for a specific ground motion intensity measure, (2) mean loss curves for structural and nonstructural subsystems, (3) structural response curves that relate, for different structural systems, a ground motion intensity measure to the engineering demand parameter (e.g., interstory drift or floor acceleration) on which the subsystem loss depends, and (4) collapse fragility curves. Since the proposed procedure facilitates decision making in the conceptual design process, it is referred to as a Design Decision Support System, DDSS. Implementation of the DDSS is illustrated in an example to demonstrate its practicality.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.10
• /
• pp.511-520
• /
• 2007

Decay usage scheduling algorithm gives preference to processes that have consumed little CPU in the recent past. It has been widely-used in time-sharing systems such as UNIX, where CPU-intensive processes and interactive processes are mixed. However, there has been no sound understanding about the mixed effects of decay usage parameters on the service performance. This paper empirically analyzes their effects in terms of the resulting service bandwidth and delay Based on such empirical analysis, we derive the clear meaning of each parameter. Such analysis and understanding provides a basis of controlling decay usage parameters for desirable service provision as required by applications.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.595-599
• /
• 2002

Edge welding of thin sheets is very difficult because of the fit-up problem and small weld area In laser welding, joint fit-up and penetration are critical for sound weld quality, which can be monitored by appropriate methods. Among the various monitoring systems, visual monitoring method is attractive because various kinds of weld pool information can be extracted directly. In this study, a vision sensor was adopted for the weld pool monitoring in pulsed Nd:YAG laser edge welding to monitor whether the penetration is enough and the joint fit-up is within the requirement. Pulsed Nd:YAG laser provides a series of periodic laser pulses, while the shape and brightness of the weld pool change temporally even in one pulse duration. The shutter-triggered and non-interlaced CCD camera was used to acquire a temporally changed weld pool image at the moment representing the weld status well. The information for quality monitoring can be extracted from the monitored weld pool image by an image processing algorithm. Weld pool image contains not only the information about the joint fit-up, but the penetration. The information about the joint fit-up can be extracted from the weld pool shape, and that about a penetration from the brightness. Weld pool parameters that represent the characteristics of the weld pool were selected based on the geometrical appearance and brightness profile. In order to achieve accurate prediction of the weld penetration, which is nonlinear model, neural network with the selected weld pool parameters was applied.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.18-21
• /
• 2008

Acoustic design parameters of a half-wave resonator are studied experimentally for acoustic stability in a model combustor. According to standard acoustic-test procedures, acoustic-pressure signals are measured. Quantitative acoustic properties of damping factor and sound absorption coefficient are evaluated and thereby, the acoustic damping capacity of the resonator is characterized. The diameter and the number of a half-wave resonator, its distribution are selected as design parameters for optimal tuning of the resonator. Acoustic damping capacity increases as the resonators with diameter increases. The optimum number of resonators or the optimum open-area ratio decreases as boundary absorption decreases.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.399-402
• /
• 2009

Acoustic design parameters of a Helmholtz resonator are studied experimentally and numerically for acoustic stability in a model acoustic tube. According to standard acoustic-test procedures, acoustic-pressure signals are measured. Quantitative acoustic properties of sound absorption coefficient are evaluated and thereby, the acoustic damping capacity of the resonator is characterized. Helmholtz resonator on spring-damper system use were understanding for acoustic damping. The length of orifice and the volume of cavity of resonator are selected as design parameters for tuning of the resonator. Acoustic- damping capacity of the resonator increases with its cavity volume. And orifice length as increases with acoustic damping capacity was decreased.

• Computers and Concrete
• /
• v.1 no.3
• /
• pp.303-324
• /
• 2004

The Component-Based Software Development (CBSD) has established itself as a sound paradigm in the software engineering discipline and has gained wide spread acceptance in the industry. The CBSD relies on the availability of standard software components for encapsulation of specific functionality. This paper presents the framework for the development of a software component for the design of general member cross-sections. The proposed component can be used in component-based structural engineering software or as a stand-alone program developed around the component. This paper describes the use-case scenarios for the component, its design patterns, object models, class hierarchy, the integrated and unified handling of cross-section behavior and implementation issue. It is expected that a component developed using the proposed patterns and model can be used in analysis, design and detailing packages to handle reinforced concrete, partially prestressed concrete, steel-concrete composite and steel sections. The component can provide the entire response parameters of the cross section including determination of geometric properties, elastic stresses, flexural capacity, moment-curvature, and ductility ratios. The component can also be used as the main computational engine for stand-alone section design software. The component can be further extended to handle the retrofitting and strengthening of cross-sections, shear and torsional response, determination of fire-damage parameters, etc.