• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.4
• /
• pp.374-385
• /
• 2012

The indoor noise of a ship is usually determined using the A-weighted sound pressure level. However, in order to better understand this phenomenon, evaluation parameters that more accurately reflect the human sense of hearing are required. To find the level of the satisfaction index of the noise inside a naval vessel such as "Loudness" and "Annoyance", psycho-acoustic evaluation of various sound recordings from the naval vessel was performed in a laboratory. The objective of this paper is to develop a single index of "Loudness" and "Annoyance" for noise inside a naval vessel according to a psycho-acoustic evaluation by using psychological responses such as Noise Rating (NR), Noise Criterion (NC), Room Criterion (RC), Preferred Speech Interference Level (PSIL) and loudness level. Additionally, in order to determine a single index of satisfaction for noise such as "Loudness" and "Annoyance", with respect to a human's sense of hearing, a back-propagation neural network is applied.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.163-167
• /
• 2003

This paper is to experimentally investigate the effect of the through-flow on the absorption performance of a perforated plate system. The experiment is performed through the systematic change of the through-flow velocity, incident sound pressure level, and the geometrical parameters such as the porosity and hole diameter. From the experimental results, it is found that fur the nonlinear relationship between the acoustic resistance and incident sound pressure level there is no influence of the through-flow on the absorption performance, but for the linear relationship between them there is a strong dependence of the absorption performance on the through-flow velocity. It is also shown that the absorption performance is controllable by changing the porosity and hole-diameter in size.

• Speech Sciences
• /
• v.7 no.4
• /
• pp.83-90
• /
• 2000

The purpose of this study was to examine some acoustic characteristics in the ear canal. It was assumed that a sound outside the external auditory canal could be different from the sound inside the external auditory canal. The acoustic signals were captured by a probe microphone placed at a distance within 1 cm from the tympanic membrane, and a reference microphone was placed over the upper pinna. Three vowels /a/, /i/, /u/ were recorded from a normal adult male speaker. The parameters such as the formant frequency ($Fl\simF5$) and the peak intensity were measured using a speech analyser, PCquirer. It was found that the entering part of the external auditory canal functions as a narrowing point as to the speech that passes through the free field. Results show that acoustic characteristics were changed for speech discrimination rather than speech perception.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1347-1352
• /
• 2001

In this study, the acoustic properties of polyester sound absorbing materials with three different bulk densities were investigated by calculating and measuring the acoustic parameters in terms of characteristic impedance, propagation constant, and absorption coefficient. For the calculations, Delany and Bazley's empirical equation was used together with the experimentally obtained specific flow resistivities under steady flow conditions. For the experimental measurements, the well-known two-thickness method was accessed. The experimentally measured values of characteristic impedance and propagation constant were generally agreed well with the corresponding calculated values. Based on the comparisons between the calculations and measurements, it was found that the magnitude of the absorption coefficient was closely related to the characteristic impedance and the real part of the propagation constant. Especially, the maximum magnitude of the absorption coefficient was depended upon the imaginary part of the propagation constant indicating the phase change of the propagation constant.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.670-673
• /
• 2005

For the comfortable housing life, an urban environment should give comfort and pleasantness to people living in house and in city. There are lots of environmental conditions in city affecting house and life and most of all the noise pollution have been become factor that makes people's life hard without need to say. Recently researches have been performed to create comfortable urban environment and a study on the evaluation of urban environmental sounds is now undergoing. This study aimed to analyse the subjective characteristics through the subjective evaluation to the sounds measured with physical parameters and eventually to find out evaluation method for urban environmental sounds. Vocabularies applied to previous studies were used for the subjective evaluation and sound sources recorded in specific places were presented with picture at the same time.

• Journal of Biosystems Engineering
• /
• v.22 no.3
• /
• pp.295-302
• /
• 1997

An ultimate purpose of this study was to develop an automatic system for brown rice quality inspection using image processing technique. In this study emphasis was put on developing an algorithm for discriminating the brown rice kernels depending on their external quality with a color image processing system equipped with an adaptor magnifying the input image and optical fiber for oblique lightening. Primarily, geometical and optical features of images were analyzed with paddy and the various brown rice kernel samples such as a sound, cracked, peen-transparent, green-opaque, colored, white-opaque and brokens. Secondary, geometrical and optical parameters significant for identifying each rice kernels were screened by a statistical analysis(STEPWISE and DISCRIM procedure, SAS wer. 6) and an algorithm fur on- line discrimination of the rice kernels in static state were developed, and finally its performance was evaluated. The results are summarized as follows. 1) It was ascertained that the cracked kernels can be detected when e incident angle of the oblique light is less than 2$0^{\circ}C$ but detectivity was significantly affected by the angle between the direction of the oblique light and the longitudinal axis of the rice kernel and also by the location of the embryo with respect to the oblique light. 2) The most significant Parameters which can discriminate brown rice kernels are area, length and R, B and r values among the several geometrical and optical parameters. 3) Discrimination accuracies of the algorithm were ranged from 90% to 96% for a sound, cracked, colored, broken and unhulled, about 81 % for green-transparent and white-opaque and 75 % for green-opaque, respectively.

• Laser Solutions
• /
• v.2 no.3
• /
• pp.11-18
• /
• 1999

This paper describes the weldability of carbon steel and stainless steel using 5㎾ $CO_2$ laser system with nearly multi-mode beam and a parabolic focusing mirror. In the laser welding of steels, major welding parameters are focal point, travel speed, beam power, shield gas and gap tolerance, etc.. Two kinds of gases(Ar, He) were used as a assist gas and supplied through the external nozzle. It is very important for optimum condition to remove plasma plume which absorbs laser beam and to obtain deep penetration and sound weld bead. Bead-on-plate welding tests were carried out for the experiments. Penetration data were obtained with various welding parameters and the effects of welding parameters were discussed. Butt welding tests were performed with various conditions. Only the optimum laser parameters assured good weld quality As a result of this study, We achieve the fundamental weldabilities using a high power $CO_2$ laser for carbon steel and stainless steel.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.4
• /
• pp.398-407
• /
• 2007

A smoothed particle hydrodynamics (SPH) method is applied for simulating two-dimensional free-surface problems. The SPH method based on the Lagrangian formulation provides realistic flow motions with violent surface deformation, fragmentation and reunification. In this study, the effect of computational parameters in SPH simulation is explored through two-dimensional dam-breaking and sloshing problem. The parameters to be considered are the speed of sound, the frequency of density re-initialization, the number of particle and smoothing length. Through a series of numerical test. detailed information was obtained about how SPH solution can be more stabilized and improved by adjusting computational parameters. Finally, some numerical simulations for various fluid flow problem were carried out based on the parameters chosen through the sensitivity study.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.2
• /
• pp.92-101
• /
• 2016

There are many results in which acoustical conditions of a classroom play an important role for studying effects and academic achievement of students. However, there are very few guidelines or design proposals which could make appropriate acoustic environment when classrooms are built or renovated. The present study suggests various design proposals satisfying acoustic standards of classrooms based on theoretical calculation and acoustic field experiments. At first, minimum area of sound absorption was calculated which is required to satisfy the acoustic standard for domestic middle and high schools. Also, room acoustic measurements were carried out in order to investigate the acoustic performance of an existing classroom by changing interior finishing materials on ceiling and rear walls. As a result, it was revealed that reverberation time standard below 0.8 s can be acquired even if there is no sound absorption on ceiling which is a general practice executed in Korea. Specially, it was found that if partial area of ceiling would be treated as reflective with the ratio of sound absorption and reflection as 2:1, almost similar acoustic parameters of $C_{50}$, $D_{50}$, RASTI (Rapid Speech Transmission Index) and higher sound levels could be acquired in comparison with the case of entire sound absorption on ceiling.

• Journal of Broadcast Engineering
• /
• v.28 no.2
• /
• pp.213-229
• /
• 2023

In this paper, we introduce a spatial sound rendering system that provides 6DoF spatial sound in real time in response to the movement of a listener located in a virtual environment. This system was implemented using MPEG-I AEP as a development environment for the CfP response of MPEG-I Immersive Audio and consists of an encoder and a renderer including a decoder. The encoder serves to offline encode metadata such as the spatial audio parameters of the virtual space scene included in EIF and the directivity information of the sound source provided in the SOFA file and deliver them to the bitstream. The renderer receives the transmitted bitstream and performs 6DoF spatial sound rendering in real time according to the position of the listener. The main spatial sound processing technologies applied to the rendering system include sound source effect and obstacle effect, and other ones for the system processing include Doppler effect, sound field effect and etc. The results of self-subjective evaluation of the developed system are introduced.