• 제목/요약/키워드: Sound board

검색결과 130건 처리시간 0.024초

Bottom ash를 이용한 경량판넬의 특성 연구 (A Study on the acoustic characteristic of the Light weight Concrete Panel using bottom ash)

  • 이성호;정갑철;정진연
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2006년도 춘계학술대회논문집
    • /
    • pp.1379-1382
    • /
    • 2006
  • Recently, the method of the apartment building design has been changed from wall type structures to moment structures. With like this reason dry walls are used plentifully. Especially, the gypsum board was used from previously plentifully however the weak point of it is difficult to maintain because it weak strength. For the improvement of gypsum board, light weight concrete panel using cement board is used recently. As this study is the research of the series t on the development of non-hearing light weight concrete Panel using bottom ash, the Purpose of this study is to obtain basic data for application in the field. The results are that the structure 1 satisfies domestic standard concerned with sound insulation between households at the laboratory and field test.

  • PDF

공동주택의 천장틀구조 변화에 따른 바닥충격음 차음특성 연구 (A Study on the Reduction Characteristics of Floor Impact Sound Insulation Due to the Ceiling Frame Structures in Apartment Houses)

  • 정환욱;기노갑;송민정;김선우
    • 한국소음진동공학회논문집
    • /
    • 제12권8호
    • /
    • pp.573-580
    • /
    • 2002
  • Generally the ceiling frame of apartment house is made of wood. But the wood frame has several problems due to the natural properties such as distortion by shrink, low fire resistance and material loss in the construction field. And it has some defections in sound insulation performance. Therefore it is necessary to develop a new method that can be used as a ceiling frame. This study aims to analyze and to compare the sound insulation characteristics against the floor impact sound between wood ceiling frame and M-bar frame which is made of steel. The results of this study are like these. M-bar frame is more effective than wood ceiling frame in sound insulation. And sound absorbing or sound insulation materials which can be Put on gypsum board are helpful to improve floor impact sound insulation performance.

블루투스 헤드셋에서의 음질 향상에 관한 연구 - 개인 청각손실 방지측면 고려 - (Study on Sound Quality Improvement in Bluetooth Headset)

  • 김현태;박장식;송종관
    • 한국정보통신학회논문지
    • /
    • 제13권6호
    • /
    • pp.1188-1193
    • /
    • 2009
  • 최근 젊은 층을 중심으로 블루투스 헤드셋 등 착용형 청음기기에 의한 소음성 난청을 겪고 있다. 본 논문에서는 청력 손상을 주로 일으키는 감도가 높은 주파수대에서 개인별 청각 특성과 최대가청한계를 고려하여 소리 크기를 조절함으로써 블루투스 헤드셀에서의 청각 손상을 감소하는 동시에 보다 자연스런 음량 조절이 가능한 방법을 보인다. CSR Bluetooth headset example design board(DEV-PC-1645)에 구현한 실험에서 청력 특성이 좋은 대역에서 기존 방법에 비해 보다 낮은 소리 크기에서 불편없이 인지 가능하였다. 또한 그 결과로써 과도한 대역별 소리 에너지를 줄여 청각 손상도 방지할 수 있었다.

시각·청각장애인을 위한 저비용 베이비 모니터 구현 (Implementation of Low-Cost Baby Monitor for deaf and Visually Impaired Person)

  • 오파도;김현희;이부형
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2015년도 추계학술대회
    • /
    • pp.159-162
    • /
    • 2015
  • 본 논문에서는 아두이노를 활용한 시각, 청각장애인을 위한 베이비 모니터를 구현하였다. 제안된 베이비 모니터는 측정부, 송신부로 나뉘고 어플리케이션과 연동된다. 측정부는 음량소리센서로 구성되고, 송신부는 블루투스 모듈로 구성된다. 측정부와 송신부는 아두이노 보드에 의해 제어된다. 측정부의 음량소리센서로 소리의 값을 측정하여 제품 내의 아두이노 보드로 값을 전달한다. 측정된 값은 송신부의 블루투스 모듈에 의해 어플리케이션으로 보내진다. 어플리케이션은 받은 값을 판단하고 스마트폰을 제어하여 그 값에 적합한 빛과 소리, 진동을 출력한다. 제안된 베이비 모니터와 어플리케이션이 값에 따라 정확히 동작됨을 보였다.

  • PDF

음원과 절대 방위를 이용한 지능형 로봇의 목표물 위치 추적 알고리즘 (Object Position Tracking Algorithm of Intelligent Robot using Sound Source and Absolute Orientation)

  • 박경진;이재강;장인훈;심귀보
    • 한국지능시스템학회논문지
    • /
    • 제17권2호
    • /
    • pp.208-213
    • /
    • 2007
  • 최근 가정용 로봇 연구가 활발히 진행됨에 따라, 가정과 같은 다이내믹한 환경에서 로봇이 목소리를 포함한 음원에 반응하고 그 위치를 정확히 찾아가는 것이 매우 중요해지고 있다. 인간이 목표물에 도달하기 위해 경로를 선택할 때, 그 목표물이 소리인 경우는 현재 위치에서 음원의 방향을 추적한다. 또한 그 목표물의 위치가 지도로 주워질 경우에는 현재 위치와 목표물의 절대적 방위를 기준으로 추적한다. 본 논문에서는 이처럼 사람이 다른 사람의 목소리를 듣고 반응하거나 어떤 방향으로 가고자할 때 소리가 나는 방향이나 지도를 통해 대략 자신만의 방위를 만드는 것에 착안하여, 지능형 모바일 로봇에 음원추적 장치와 전자나침반을 장착함으로써 음원의 방향 또는 절대 방위를 기준으로 목표물을 찾아가는 알고리즘을 제시하고자 한다.

건축 구조물에의 차음시트 적용 (Effect of Sound Damping Sheet on Sound Transmission Loss in Building Structure)

  • 김상렬;김재승;김현실;강현주;마경업;한문성
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 춘계학술대회논문집
    • /
    • pp.1723-1728
    • /
    • 2000
  • This paper deals experimentally with the effect of the sound-damping sheet on building wall system; brick wall, light wall panel, and gypsum board. Experimental results show that when the sound-damping sheet is attached on wall systems, the mass and/or damping effects result in increasing of STL of wall system depending on the characteristics of the original partition. It is pointed out that the performances of sound damping sheets must be presented with specific wall structures that applied, not by the sound transmission loss of the sheet itself.

  • PDF

복합판넬의 차음특성 비교 : 잔향실과 실선 (Sound Transmission Performance of Composite panels : Reverberation chamber vs. Cabins in Ship)

  • 강현주;김재승;김현실;김상렬
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 춘계학술대회논문집
    • /
    • pp.843-848
    • /
    • 2000
  • This paper deals experimently with the difference between the cabins in ship-board and the reverberation chamber in sound transmission loss. Experimental results from the cabins show that there are various flanking transmission losses which deteriorate significantly the performance of the sound transmission loss. They also show that as a representative of the flanking transmission losses, sound leakages between a ceiling and a wall, the joints of the partitions, and the luminant devices play an important role. From the various measurements, it can be is concluded that unless one do not take any treatments on the flanking transmission loss, the field sound transmission loss will be considerably decreased by more than 10 dB, comparable to the sound transmission loss.

  • PDF

파티클보드의 밀도경사와 흡음성 개선을 위한 열압기술 (Hot Pressing Technology for Improvement of Density Profile and Sound Absorption Capability of Particleboard)

  • 박희준;김현중
    • Journal of the Korean Wood Science and Technology
    • /
    • 제30권1호
    • /
    • pp.25-33
    • /
    • 2002
  • 파티클보드의 두께방향으로 밀도경사와 흡음성 개선을 위한 새로운 열압방식개발을 위하여 본 과제를 수행하였다. 적용한 열압방식으로는 기존의 평판가열식 열압방식(A-type pressing), 성형장치내 열압방식(B-type pressing), 그리고 성형장치내 요철카울을 설치한 열압방식(C-type pressing)을 적용하였다. 원료목질은 낙엽송 세이빙을 사용하였으며, 접착제로는 수용성 페놀-포름알데하이드 접착제를 사용하였다. 흡음성 개선을 위한 보드는 열압시 요철카울에 의하여 보드 이면에 계단형 공극을 생성하였다. 열압방식별 제조된 보드의 물리적 및 기계적 성질을 측정하였는 바, 성형장치내 열압을 함으로써 강도적 성능을 향상시킬 수 있는 것으로 나타났으며, 보드의 두께방향 밀도경사 역시 평균밀도에 대한 최소밀도의 비율이 90% 이상을 나타내어 기존의 평판가열식으로 제조한 보드 보다 크게 개선시킬 수 있는 것으로 나타났다. 또한 열압시 요철카울에 의하여 천공을 해 줌으로써 파티클보드의 흡음계수를 향상시킬 수 있는 것으로 나타남으로써 향후 저밀도 후판보드 제조가능성과 흡음재 등 새로운 건축내장재료로의 사용가능성을 확인하였다.

방염처리가 톱밥-귤박 혼합파티클보드의 흡음성능에 미치는 영향 (Effect of Flame Resistant Treatment on The Sound Absorption Capability of Sawdust-mandarin Peel Composite Particleboard)

  • 강춘원;;강호양
    • Journal of the Korean Wood Science and Technology
    • /
    • 제43권4호
    • /
    • pp.511-517
    • /
    • 2015
  • 방염처리에 의한 톱밥-귤박 혼합파티클보드의 방염성능과 흡음성능의 변화를 관찰하고자 톱밥과 귤박을 혼합하여 파티클보드를 제작하였다. 보드로부터 원반형 시험편을 제작하여 무처리 보드에 2마이크로폰 전달함수법으로 보드의 흡음률을 측정하고 동일한 시험편에 방염수지를 도포한 후 동일한 방법으로 흡음률을 측정하였다. 방염성능 시험은 무처리와 방염처리 톱밥-귤박 혼합파티클보드를 45도 연소챔버에서 연소하여 탄화면적을 비교하였다. 방염처리에 의해시험편의 중량은 6.3% 정도 증가하였으며 탄화면적은 46.7% 정도 감소하였다. 흡음률은 측정주파수범위(500-6,400 Hz) 에서 방염처리 시험편이 무처리 시험편보다 약간 낮게 나타났다. 무처리와 방염처리 톱밥-귤박 혼합파티클보드의 흡음성능은 측정주파수 영역에서 상용 석고보드(두께 11 mm)보다 우수한 흡음성능을 나타내어 비내력벽 등의 흡음판으로의 이용이 기대된다.

저회를 이용한 경량판넬의 특성 연구 (A Study on the Acoustic Characteristic of the Light Weight Concrete Panel Using Bottom Ash)

  • 정갑철;정진연
    • 한국소음진동공학회논문집
    • /
    • 제17권2호
    • /
    • pp.149-154
    • /
    • 2007
  • Recently, the method of the apartment building design is changing from wall type to moment structure. Dry walls are used plentifully. Until now, the gypsum board is used mainly but it has many problems. For improving the problems, the light weight concrete panel using cement board is used recently. The purpose of this study is to obtain basic data for the light weight concrete panel using bottom ash. As a result, some structures satisfies domestic standard concerned with sound insulation between households at the laboratory and field test.