• 한국소음진동공학회논문집
• /
• 제16권12호
• /
• pp.1252-1261
• /
• 2006

This paper summarizes theoretical work on the multichannel decentralized feedback control of sound radiation from aircraft trim panels using piezoceramic actuators. The aircraft trim panels are generally honeycomb structures designed to meet the design requirement of low weight and high stiffness. They are resiliently-mounted to the fuselage for the passive reduction of noise transmission. It is motivated by the localization of reduction in vibration of single channel active trim panels. 12-channel decentralized feedback control systems are investigated in terms of the reduction of noise and vibration for three configurations of sensor actuator pairs. Local coupling of the closely-spaced sensor and actuator pairs was modeled using single degree of freedom systems. The multichannel control system is characterized using the state-space model. For the stability point of view, the relative stability or robustness is evaluated by comparing the real part of eigenvalues of the system matrix for the three configurations. The control performance is also evaluated and compared for the three configurations. It is found that the multichannel system can lead to the globalization of the reduction in vibration and radiated noise. It does not appear to yield a significant improvement in the vibration because of decreased gain margin. However, the reduction in the radiated noise is remarkably improved due to the variation of the vibration pattern with the actuation configurations.

• 대한기계학회논문집A
• /
• 제20권5호
• /
• pp.1573-1581
• /
• 1996

This paper present as experimental demonstratio of DSP and a sensory actuator that is used to actively control sound transmission/radiation through a vibrating plate. A plane acoustic wave incident on a clamped, thin circular plate was used as a noise source, and a sensory actuator bounded to the plate was used to control and sense vibration of the plate. The sound transmission reduction problem was tranformed as a structural vibration control problem that actively control the structural vibration modes coupled to acoustic modes. The results show that the first structural vibration mode is controlled with a reduction of 78 percent in the displacement and velocity of the plate. This corresponds to a 13dB reduction in the acoustic response. These experimental results indicate that a sensory actuator bounded to the plate can be employed to attenuate the sound transmitted to radiated from the plate.

• 한국음향학회지
• /
• 제31권6호
• /
• pp.359-366
• /
• 2012

현대사회를 살아가는 사람들은 버스나 지하철과 같은 대중교통에서나 백화점이나 할인점 같은 다수의 사람이 모이는 환경에서 순전히 타의에 의해 온갖 소음에 노출된다. 이런 환경에서 휴대전화나 PMP 등 개인 휴대용 단말기 사용이 늘어나면서 공공장소에서 소음 문제는 점점 심각해지고 있다. 사람들은 소음환경 속에서 휴대기기를 이용해 원활한 정보교환을 위해 일반적으로 소음보다 15 dB이상 큰 음압으로 휴대기기를 구동하고 있다. 이러한 휴대기기의 음압을 측정해보면 110 dB까지 발생하고 있으며, 이렇게 발생한 음압은 사용자에게 소음성 난청을 유발시키고, 주변사람에게 또 다른 소음문제를 발생시킨다. 이러한 문제를 해결하기 위해 골전도 시스템을 이용한 방법을 제안한다. 본 논문에서는 휴대전화에 일반스피커와 함께 골전도 스피커와 골전도 마이크를 사용해 피드백을 통한 보상을 하였고, 이 방법에 의해 주변 소음의 영향을 줄이고 휴대전화 음질 향상하는 방법을 제안한다. 제안한 방법으로 휴대전화 사용자 주변의 소음에 대한 영향을 줄이고 통화 음질을 향상해 약 17 dB의 성능 향상효과를 확인하였다.

• 감성과학
• /
• 제8권4호
• /
• pp.423-433
• /
• 2005

컴퓨터 하드웨어의 발전은 예술과 기술의 결합을 더욱 결속시키는 계기가 된다. 기계간의 상호작용에서 관객이 간섭할 수 있게 되면 그 결과물은 관객이 작품을 완성한다고 한다 기술의 업그레이드가 진화하며 재사용 되는 경우를 '피드백'이라 말할 수 있다. 백남준의 '참여 TV'는 기계가 인간의 행동에 반응하여 시지각 정보를 실시간으로 행위의 정도에 따라 반응하여 결과물을 보여주는 기본 방식을 갖춘 작품이다 댄 그래함의 작품에서 시공의 피드백을 경험할 수 있다. '연속되는 과거로 이루어지는 현재'라는 설치를 통해 관객의 영상이 거울에 피드백되는 상황 속에서 모니터에서는 5초 전 관객이 했던 영상을 재생시키는 장치를 하였다. 빌 비올라의 영상과 음향의 실시간 확대라는 점에서 감성을 자극하는 공명의 피드백을 일으키고 있는 작품처럼 우연의 시간과 관객의 등장을 바탕으로 한 작가의 철학이 읽혀지는 작품으로 승화되어야 하는 것이 현대 미디어 아트가 풀어 나가야 할 근본적인 화두이다. 스텔락은 몸과 기계 그리고 신경과 두뇌가 발생시키는 신호 체계에 많은 관심을 보였다. 미디어인 몸과 터미널 디스플레이 행위자로 결국 맥루한이 말한 몸의 확장으로서의 미디어 자체가 되었다. 제프리 쇼는 '명료한 도시 legible City'에서 관객의 몸이 관여하여 페달의 속도와 핸들의 움직임에 영상이 반응한다. 작품 'RE:MARK'는 에드몽 뀨쇼(Edmond Couchot)의 '바람에 심는다.' 나 백남준의 '참여 TV'에서 보여주었듯이 마이크를 입력장치로 사용하여 인터렉션을 유도하였다. 피아간의 피드백이 없으면 커뮤니케이션도 없다. 실감을 느끼는 관객들은 작품에 감동한다 피드백 현상이 자연스러워야 하는 이유이다. 작가 정신의 숭고한 고유-독창성(Originality)이 피드백의 경로를 투과하면서 자신을 남에게 투영시켜 얻어내는 것이 고유성의 변종이다. 피드백은 단순한 작품의 일부가 아니라 작품을 이루는 뼈대이다 기술의 과시만으로는 예술의 행위가 될 수 없다. 작가의 예술성이 관객의 감성에 피드백 되도록 노력해야 한다 그러기 위해서는 예정된 피드백이란 느낌을 관객이 갖지 않도록 하여야 한다. 인터렉티브 미디어 아트는 초기의 형태에서 벗어나 새로운 집적된 피드백 기술로 전환하여야 할 시기가 온 것이다.

• 대한인간공학회지
• /
• 제24권3호
• /
• pp.29-34
• /
• 2005

Little research has been performed regarding auditory icons even though auditory icons have great potentials as a strategy for creating informative, intuitively accessible, and unobtrusive interface. Therefore, this study was conducted to design new auditory icons through the iconic mapping for ten most frequently used mobile phone menus, and to show the usability of auditory icons. Two most familiar auditory sounds for each menu were collected and compared to the current button-pressing sound. The results show that the newly designed auditory icons had shorter recognition times, better satisfaction than the current icons. In other words, auditory icons could be an effective interface to provide a redundant feedback along with visual feedbacks in navigating mobile devices.

• 소음진동
• /
• 제7권6호
• /
• pp.985-991
• /
• 1997

Combustion instability is a common phenomenon in a ducted flame burner and is known as accompanying low frequency oscillation. This is due to the interaction between unsteady heat release rate and sound pressure field, that is, thermoacoustic feedback. In Rayleigh criterion, combustion instability is triggered when the heat addition is in phase with acoustic oscillation. A Rijke type burner with a pre-mixed flame is built for investigating the effect of Reynolds number and equivalence ratio on thermoacoustic oscillation. The results suggest that the frequency of max, oscillation is dependent on Reynolds number and equivalence ratio whereas its magnitude is not a strong function of these two parameters.

• 소음진동
• /
• 제8권5호
• /
• pp.914-921
• /
• 1998

Combusion instability due to thermoacoustic feedback in a ducted combustor usually excites severe noise and vibration, which could lead to result in the failure of the system or environmental dispute. In the present study, an active noise control(ANC) method with an adaptive algotithm is hired to suppress instability which has very discrete behavior in the frequency domain. Especially a feedback system is composed to evade hot environment of the combustor, and as a preliminary, the performance and stability of the controller is chekced by simulating the real situation with harmonic waves. Application to the real combustor showed serious reductions in sound pressure level by 20∼30 dB. It was also shown that the selected control system was very stable and effective.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.764-769
• /
• 1994

The impedance of an electro-acoustic transducer can be controlled by motional feedback, and the noise in a duct can be reduced actively by adjusting the impedance using an additional sound. In this paper, two approaches for active noise control using motional feedback (MFB) loudspeaker are described. First configuration uses an external sensor to pickup of source directly. In this configuration, the adaptation of controller is necessary to compensate the change of transfer function from noise source to control poing. The second configuration uses a new adaptive algorithm specialized for peridic noise. Because this configuration does not require any reference input and the error sensor couples very tightly with control loudspeaker, this MFB system itself is independent of the duct condition. No microphone are required in both configurations, so that a more reliable and stable active control system can be realized under severe conditions such as high pressure, high temperature, dust, flow and so on.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.678-683
• /
• 1998

Combustion instability by thermoacoustic feedback incite strong low frequency noise and vibration which damage the system and provoke the environmental problems. Therefore, it is necessary to control the thermoacoustic oscillation. In the way of controlling the instability, active control method using adaptive algorithm is applied. In this study, active noise control method using anti-sound technique is selected, whose principle is cancelling the noise with the addition of opposite phase sound. At first, simulation is performed to confirm the stability of controller, and after that control of combustion instability is carried out to get cancellation of 20-30dB SPL.

• 한국멀티미디어학회논문지
• /
• 제20권9호
• /
• pp.1551-1558
• /
• 2017

Audio power amplifiers have been designed based on the premise that the impedance of loudspeakers is fixed at nominal 4 ohms or 8 ohms. However, it is known that the impedance varies with frequency and takes on the nominal value at some limited frequencies. The principle of the loudspeaker operation reveals that the sound pressure produced by the loudspeaker is proportional to the current flowing in the voice coil, not the voltage between the two terminals. We take the characteristics of the loudspeaker into account and compare the frequency responses of the loudspeaker in voltage-drive mode and current-drive mode via computer simulations, to conclude that the audio amplifier drive mode should be re-considered in an effort to improve the sound quality.