• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.9
• /
• pp.1157-1164
• /
• 2001

Centrifugal fans are widely used and the noise generated by these machines causes one of the most serious problems. In general, the centrifugal fan noise is often dominated by tones at BPF(blade passage frequency) and its higher harmonics. This is a consequence of the strong interaction between the flow discharged from the impeller and the cutoff in the casing. However, only a few research have been carried out on predicting the noise because of the difficulty in obtaining detailed information about the flow field and casing effects on noise radiation. The objective of this study is to understand the generation mechanism of sound and to develop a prediction method for the unsteady flow field and the acoustic pressure field of a centrifugal fan. We assume that the impeller rotates with a constant angular velocity and the flow field of the impeller is incompressible and inviscid. So, a discrete vortex method(DVM) is used to model the centrifugal fan and to calculate the flow field. The force of each element on the blade is calculated by the unsteady Bernoulli equation. Lowsons method is used to predict the acoustic source. In order to compare the experimental data, a centrifugal impeller and wedge introduced by Weidemann are used in the numerical calculation and the results are compared with the experimental data. Reasonable results are obtained not only for the peak frequencies but also for the amplitudes of the tonal.

• Transactions of Materials Processing
• /
• v.16 no.4 s.94
• /
• pp.293-298
• /
• 2007

Recently, there is a need to produce a large forged part for the flight, shipping, some energies, and military industries, etc. Therefore, an open die forging technique of cast ingots is required to obtain higher quality of large size forged parts. Cogging process is one of the primary stages in many open die forging processes. In the cogging process prior to some open die forging processes, internal cavities have to be eliminated for defect-free. The present work is concerned with the elimination of the internal cavities in large ingots so as to obtain sound products. In this study, hot compression tests were carried out to obtain the flow stress of cast microstructure at different temperature and strain rates. The FEM analysis is performed to investigate the overlap defect of cast ingots during cogging stage. The measured flow stress data were used to simulate the cogging process of cast ingot using the practical material properties. Also the analysis of cavity closure is performed by using the $DEFORM^{TM}-3D$. The calculated results of cavity closure behavior are compared with the measured results before and after cogging, which are scanned by the X-ray scanner. From this result, the criteria for deformation amounts effect on the cavity closure can be investigated by the comparison between practical experiment and numerical analysis.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.3
• /
• pp.193-210
• /
• 1991

For the deckhouse or superstructure, attention is directed to the reduction of vibration from a human susceptibility point of view. The two basic requirements for obtaining a low vibration level in the accommodation are to ensure that excitation forces from propeller and/or main engine are small and to avoid resonance excitation of the hull and superstructure. In recent years increased attention has been directed towards the problems of vibration and noise in deckhouse, which have caused major problems with regard to the environmental quality in the living quarters for crews. Accordingly, in this paper, the characteristic of the vibration of deckhouse of fishing boat, of which the length/height ratio is also relatively high, are studied systematically with regard to the shape and modelling of deckhouse based on finite element method of 1-dimensional, 2-dimensional and 3-dimensional model. This study is divided into 4-part. 1st part is the global deckhouse vibration, 2nd part is the local deckhouse vibration, 3rd part consists of the estimation for stiffness of foundational support and 4th part is the application to TUNA LONG LINER of 416 ton class. For the global vibration analysis, the severity of the vibration depends on the longitudinal shear and bending stiffness of the deckhouse, on the vertical deckhouse support(fore, aft and sides). However, even if the design is technically sound, vibration problems may arise due to vertical or longitudinal hull girder or afterbody resonances. Author applied the method of this study to the analysis of, deep-sea fishing vessel of G.T. 416 ton class with relatively low height and long deckhouse, and investigated the vibrational characteristic of the fishing vessel with earlier structural feature. According to this investigation, the vibration, response of above vessel was confirmed of which main hull and deckhouse behave as one body. It is at the bottom of vibrational trouble which a accommodation part of the fishing vessel is raised, that is the local vibration for side wall, fore-aft wall and deck plate of deckhouse rather than thief fect of fore-aft vibration of deckhouse for above fishing vessel. and the resonance of main hull, deckhouse and driving system such as the main engine, propeller in exciting source is mainly brought up as the trouble.

• Journal of Sensor Science and Technology
• /
• v.11 no.3
• /
• pp.171-182
• /
• 2002

The differential electromagnetic transducer for IME(implantable middle ear) system, which have two small permanent magnets glued with the same pole facing each other in the coil, has high vibration efficiency and does not influenced by external magnetic field. In this paper, using finite element method, highly efficient structure of the transducer was proposed and vibration force of the transducer was calculated by electromagnetic theory. And the necessary vibration force of transducer to transmit the sound signal to inner ear when the transducer is attached at stapes was calculated and the design parameters of the transducer were investigated. Using the parameters, the differential electromagnetic transducer was manufactured in small size to implant in confined human middle ear. And it was examined by unloaded and loaded vibration experiment using temporal bone sampled from cadaver.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.531-539
• /
• 2014

Recent studies of multiple participatory interactive media designs hows that the key element to this area is the participation of the audience. Due to this matter, this paper discusses the categories of the phase and looks into the characteristics of participatory matters to clarify the distinction. The categories that has been mentioned in this paper are multiple participatory types and active participatory types. Based on this matter, research practicing the Mira has been conducted in two separate groups - video and sound, and suggests the solution to the problems that has occurred during the process of implementing the final video system called 'The 360 Project'. The fact that the paper suggests a small range of participatory categories and hasn't come up with a certain analysis to the final outcome appears as a limit. The inadequacy will be supplemented throughout the following paper, hoping there will be improved versions of multiple participatory researches.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.1
• /
• pp.35-40
• /
• 2014

A multi-objective optimization of a regenerative fan for enhancing the aerodynamic and aeroacoustic performance was carried out using an integrated fan design system, namely, Total FAN-Regen$^{(R)}$. The Total FAN-Regen$^{(R)}$ was developed for non-specialists to carry out a series of design process, viz., computational preliminary design, three-dimensional aerodynamic and aeroacoustic analyses, and design optimization, for a regenerative fan. An aerodynamic analysis of the regenerative fan was conducted by solving three-dimensional Reynolds-averaged Navier-Stokes equations using the shear stress transport turbulence model. And, an aeroacoustic analysis of the regenerative fan was implemented in a finite/infinite element method by solving the variational formulation of Lighthill's analogy based on the results of the unsteady flow analysis. An optimum shape obtained by Total FAN-Regen$^{(R)}$ shows the enhanced efficiency and decreased sound pressure level as much as 1.5 % and 20.0 dB, respectively, compared to those of the reference design. The performance test was carried out for an optimized regenerative fan to validate the performance of the numerically predicted optimal design.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.5
• /
• pp.12-24
• /
• 2000

This study seeks to find an approach tool that allows to consider both ecological and visual aspect in developing an ecological space. Main objective of this study is to develop a planting design method in consideration of correlation between high visual preference and ecological diversity. To this end, an integrated method based on visual design principles and landscape ecological principles was developed first. Then study areas of 20 natural areas and 10 urban areas were selected to survey and analyze visual preference and ecological diversity. The result showed that scale is an element that has the greatest impact on visual preference. In areas with high ecological diversity, scale and connectivity had the biggest impact. In order to have a planting design desirable visually and ecologically based on these factors, it may be divided into following three issues.(1) In oder to increase ecological diversity in areas with strong visual preference, a priority should be given to introduce techniques promoting harmony among dominant species of various scales and other species. At the same time, there should be efforts to secure connectivity. (2) To improve visual preferences in areas with high ecological diversity, close-range, medium-range, and distant landscapes should be ensured by aligning colors and connectivity of various scales with other factors. (3) Also, a target area should be developed into a visually preferred and ecologically sound area by supplementing form and interlocking issues and identifying the spirit of the place. This study offers a way to improve visual preference and promote ecological diversity indeveloping ecological parks for the future. In landscape planning and design, it is important to secure various scales and connectivity as high-priority principles.

• Structural Engineering and Mechanics
• /
• v.32 no.2
• /
• pp.283-300
• /
• 2009

The characteristic response of a structure to blast load may be divided into two distinctive phases, namely the direct blast response during which the shock wave effect and localized damage take place, and the post-blast phase whereby progressive collapse may occur. A reliable post-blast analysis depends on a sound understanding of the direct blast effect. Because of the complex loading environment and the stress wave effects, the analysis on the direct effect often necessitates a high fidelity numerical model with coupled fluid (air) and solid subdomains. In such a modelling framework, an appropriate representation of the blast load and the high nonlinearity of the material response is a key to a reliable outcome. This paper presents a series of calibration study on these two important modelling considerations in a coupled Eulerian-Lagrangian framework using a hydrocode. The calibration of the simulated blast load is carried out for both free air and internal explosions. The simulation of the extreme dynamic response of concrete components is achieved using an advanced concrete damage model in conjunction with an element erosion scheme. Validation simulations are conducted for two representative scenarios; one involves a concrete slab under internal blast, and the other with a RC column under air blast, with a particular focus on the simulation sensitivity to the mesh size and the erosion criterion.

• Journal of Digital Convergence
• /
• v.13 no.5
• /
• pp.195-204
• /
• 2015

This paper CTQ(Critical to Quality) to draw, aim to derive a key quality factor reflects the customer's requirements by utilizing the QFD technique for sparkling water purifier device that combines the new module. Tasting participants, consumers and New Module device intended for developers who develop and conduct a survey and FGI (Focus Group Interview) VOC(Voice of Customer) to draw, drawn by the EC through the developer VOC and EC (Engineering Characteristic) and charts the relationship between the phases was prepared HOQ(House of Quality). Sparkling water purifier through the HOQ chart certain taste, sound, running water, CO2 cylinder replacement cycle, we obtain results that element is an important quality factors such as ease of use. These factors are closely related to each component regulators and Module device (mixing) associated with the taste of water, booster pumps, and deliver results that the solenoid is considered the most critical part.

• Journal of Science and Technology Studies
• /
• v.1 no.2 s.2
• /
• pp.399-422
• /
• 2001

Models for human cognition currently discussed in cognitive science cannot be appropriate ones. The symbolic model of the traditional artificial intelligence works for reasoning and problem-solving tasks, but doesn't fit for pattern recognition such as letter/sound cognition. Connectionism shows the contrary phenomena to those of the traditional artificial intelligence. Connectionist systems has been shown to be very strong in the tasks of pattern recognition but weak in most of logical tasks. Brooks' situated action theory denies the. notion of representation which is presupposed in both the traditional artificial intelligence and connectionism and suggests a subsumption model which is based on perceptions coming from real world. However, situated action theory hasn't also been well applied to human cognition so far. In emphasizing those characteristics of models I refer those models 'left-brain model', 'right-brain model', and 'robot model' respectively. After I examine those models in terms of substantial items of cognitions- mental state, mental procedure, basic element of cognition, rule of cognition, appropriate level of analysis, architecture of cognition, I draw three arguments of embodiment. I suggest a way of unifying those existing models by examining their theoretical compatability which is found in those arguments.