• 한국음향학회지
• /
• 제31권1호
• /
• pp.19-28
• /
• 2012

Kirchhoff 적분식을 이용하여 외부 음향 문제의 시간 영역 응답을 계산하는 경우, 주파수영역 해석과 마찬가지로 가상적인 내부 음향 모드에 기인한 비유일성 문제가 발생한다. 이를 해결하는 방법들 중의 하나로서 CHIEF(Combined Helmholtz Integral Equation Formulation) 방법이 쓰이는데, 이는 몇몇 내부 수음점의 응답을 0으로 추가하여 구속하는 조건을 부가하는 기법이다. 이 기법은 주파수 영역 경계요소법에서는 간편한 수식 때문에 많이 사용되고 있지만, 시간 영역에서는 사용된 예가 없다. 본 연구에서는 대상체 내부의 가상 수음점과 경계 표면의 절점들간의 최소 거리에 대한 지연시간을 고려하여, 계산하고자 하는 미지수인 현재 시간의 경계 표면 음장을 구속함으로써, 시간 영역 해석에 적합하도록 CHIEF 방법을 수식화하였다. 예제로서, 반지름 방향으로 진동하는 구의 음향 방사 문제를 다루었다. CHIEF 방법을 적용함에 따라 저차의 내부 음향 모드에 기인한 비유일성 문제를 해결할 수 있었고, 비요동 모드에 의한 수치적 불안정성을 피할 수 있었다. 그러나, 유효주파수 밖에 남은 내부 음향의 고차모드들에 의한 수치적 불안정성은 증가하였다.

• 해양환경안전학회지
• /
• 제21권6호
• /
• pp.751-758
• /
• 2015

공조시스템의 소음 예측은 주로 NEBB에서 제안한 경험적인 방법에 의해 수행된다. 그러나, NEBB에서 제안한 방법은 선박에만 있는 대형 덕트의 요소를 반영하지 못하므로 선박에 적용하는데 한계가 있다. 본 논문에서는 선박용 대형 덕트의 소음 예측을 위한 전산해석방법을 연구하였다. 경계요소법을 사용하여 대형 덕트의 단위 길이당 소음 감소량에 대한 추정식을 개발하였고, 경계요소법과 전산유체역학을 사용하여 보강재가 설치된 대형 덕트에서의 유동기인소음을 예측하였다. 유입 유속이 10m/s, 보강재의 종류가 200플랫 바인 경우 100 dB 이상의 큰 소음이 발생하는 것을 알 수 있었다. 또한, 경계요소법과 유한요소법을 사용하여 덕트 투과 소음을 예측하였다. 덕트 내부와 외부의 음압 값 차이는 대략 10~15 dB정도 인 것을 알 수 있었다. 이를 통해 조선소에서는 대형 덕트를 포함한 선박 HVAC 소음 예측을 할 수 있을 것으로 기대한다.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.432-461
• /
• 1995

The basic principles in the design of Class II amalgam cavity preparations have been modified but not changed in essence over the last 90 years. The early essential principle was "extension for prevention". Most of the modifications have served to reduce the extent of preparation and, thus, increase the conservation of sound tooth structure. A more recent concept relating to conservative Class II cavity preparations involves elimination of occlusal preparation if no carious lesion exists in this area. To evaluate the ideal ClassII cavity preparation design, if carious lesion exists only in the interproximal area, three cavity design conditions were studied: Rodda's conventional cavity, simple proximal box cavity and proximal box cavity with retention grooves. In this study, MO amalgam cavity was prepared on maxillary first premolar. Three dimensional finite element models were made by serial photographic method. Linear, eight and six-nodal, isoparametric brick elements were used for the three dimensional finite element model. The periodontal ligament and alveolar bone surrounding the tooth were excluded in these models. Three types model(B option, Gap option and R option model) were developed. B option model was assumed perfect bonding between the restoration and cavty wall. Gap option model(Gap distance: $2{\mu}m$) was assumed the possibility of play at the interface simulated the lack of real bonding between the amalgam and cavity wall (enamel and dentin). R option model was assumed non-connection between the restoration and cavty wall. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed the displacement, 1 and 2 direction normal stress and strain with FEM software ABAQUS Version 5.2 and hardware IRIS 4D/310 VGX Work-station. The results were as followed. 1. Rodda's cavity form model showed greater amount of displacement with other two models. 2. The stress and strain were increased on the distal marginal ridge and buccopulpal line angle in Rodda's cavity form model. 3. The stress and strain were increased on the central groove and a part of distal marginal ridge in simple proximal box model and proximal box model with retention grooves. 4. With Gap option, Rodda's cavity form model showed the greatest amount of the stress on distal marginal ridge followed by proximal box model with retention grooves and simple proximal box model in descending order. 5. With Gap option, simple proximal box model showed greater amount of stress on the central groove with proximal box model with retention grooves. 6. Retention grooves in the proximal box played the role of supporting the restorations opposing to loads.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.26-29
• /
• 2008

Recently, the hydroforming of high strength aluminum tubes has many studies and applications in manufacturing industry, especially in automotive industry. But high strength aluminum tube has limited expansion capability at most 15% at normal temperature. New manufacturing process, called hot air forming, is introduced to apply aluminum tube to the automotive sub frame components which have complex shape and require high expansion ratio about 40%. The process is carried out at the elevated temperature above $500^{\circ}C$, so numerous material properties and process parameters related to high temperature should be investigated and determined to get a sound product. In this paper, the hot air forming process of automotive sub frame was investigated. The effect of the forming parameters such as the temperature of tool, axial feeding and gas pressure are analyzes by using explicit finite element method.

• 한국소음진동공학회논문집
• /
• 제25권4호
• /
• pp.223-231
• /
• 2015

Enclosures are widely used to alleviate the contribution of machinery noise. It has been long concerned with the noise transmission through the access openings of the enclosures. In this study, we investigate active noise control technology for reduction of the transmission. A numerical model based on the acoustic boundary element method is first established. Using the numerical model, the acoustic transfer functions of the field points over the opening to the primary source at arbitrary locations are estimated. The feedforward control to minimize the acoustic power through the opening is then numerically implemented. The controller drives the secondary source to destructively interfere the noise transmission through the opening. Finally, a parametric study is conducted to evaluate the effects of the location and the number of the microphones on the control performance. Furthermore, the effects of the location of the secondary source on the performance of active noise control are investigated. It is followed that the control system implemented in this study leads to a significant reduction of about 31.5 dB in the sound power through the opening using only one secondary source located at the optimized position.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.252-255
• /
• 2012

게임의 멀티미디어 요소인 그래픽과 사운드 등은 '몰입'이라는 게임 플레이의 중요한 역할을 한다. 따라서 게임의 품질은 멀티미디어 요소의 품질과 밀접한 관계가 있다고 할 수 있다. 본 연구에서는 콘텐츠 분야의 각종 공모전 심사 기준과 선행 연구를 바탕으로 게임의 멀티미디어 요소에 대한 품질 평가 영역과 영역별 세부 하위 요소들을 추출하였다. 추출된 평가 영역과 하위 요소에 대한 필요성을 검증하기 위해 게임 이용자들을 대상으로 설문을 실시할 것이다. 연구 결과는 향후 게임 제작에 있어서 중요한 참고 자료가 될 것으로 본다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 하계학술발표대회 논문집 제19권 1호
• /
• pp.275-278
• /
• 2000

In this study, the acoustic transducer of a thin circular disc-type with PZT/Metal was designed. The dielectric and piezoelectric properties of $0.5wt\%$ $MnO_2$ and NiO doped 0.1Pb($Mg_{1/3}$$Nb_{2/3}$)$O_3$-$0.45PbTiO_3$-$0.45PbZrO_3$ ceramics were investigated aiming at acoustic transducer applications. The vibration characteristics for the laminated circular plate was analyzed for the various thickness and diameter of the piezoceramic layer and metal layer. The acoustic characteristics which is radiated from the acoustic transducer within the finite space was simulated using the finite element method. It has been observed that the characteristics of the sound pressure ard impedance response calculated for the various models of the size and geometry of acoustic transducer.

• The Journal of the Acoustical Society of Korea
• /
• 제27권2E호
• /
• pp.35-44
• /
• 2008

The beat frequency is very important for the sound of Buddhist temple bells, but its concrete origins have not yet been fully clarified. In our research, we considered the beat of the bell at Hojobo Temple (Kanagawa Prefecture). Although its beat frequency has already been measured as 1.6 Hz, no satisfactory explanation has been offered for the factor that determines this value. In our previous research, we investigated the "Doza," the point where the bell is struck, and the "Obi," the vertical stripes around the bell, both of which are circumferential asymmetrical factors that can be visually recognized. Our investigations were carried out by using the Finite Element Method. These factors, however, could not sufficiently explain the beat frequency. Here, we first investigate the "Nyu," the many small projections on the bell, and the deviation between the centers of the inner and outer diameters of the bell. These two factors, however, were also found tobe insufficient explanations of the beat frequency. Through subsequent investigation, however, we finally clarified that the beat frequency's origin lies in the local dimension variation in the "Komazume," which is the bottom part of the bell as well as its thickest part.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.387-392
• /
• 2016

Lower flux leakage designs have become important in the development of microspeakers used in thin and miniaturized mobile phones. We propose four methods to reduce the flux leakage of the magnetic circuit in a microspeaker. Optimization was performed based on the proposed approach by using the response surface method. Electromagnetic analyses were conducted using the finite element method. Experimental results are in good agreement with the simulated results obtained in one degree-of-freedom analysis from 100 to 5 kHz. Both the simulated and experimental results confirm that one of the proposed methods is much more effective in reducing flux leakage than the other methods. In the optimized method, compared with a default approach, the average radial flux density in the air gap decreased only by 5.5%, the maximum flux leakage was reduced by 28.6%, and the acoustic performance at primary resonance decreased by 0.45 dB, which gap is indiscernible to the human ear.

• 건축역사연구
• /
• 제24권6호
• /
• pp.21-33
• /
• 2015

This study aims to rediscover the meaning and value of Soswaewon construction represented in Kim In-Hu's 48 poems on the basis of the concept and idea of soundscape. It classified the landscape resources through the various emotional elements such as the sense of sight, hearing, smell, touch, taste, and warmth described in the 48 poems of Soswaewon, and also interpreted the meaning and value of Soswaewon construction. Appreciating various sounds of Soswaewon, Kim In-Hu understood a sound as an important element of the landscape. Also, he abundantly wrote down the interesting changes of Soswaewon which vary depending on time or seasons. The 48 poems contain the scent and feel of Soswaewon as well as the soundscapes which can be heard with ears. A variety of sounds heard in Soswaewon are the whole senses which are combined with the chill of Soswaewon, the fragrance of trees and the mystery of the mountain, etc, and they mean the wider world much more than the value of physical sounds. Soundscapes of Soswaewon are becoming an emotional space which intactly conveys not only the musical inspiration but also the scent of life to us.