• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.946-948
• /
• 2013

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1465-1471
• /
• 2008

This study was carried out to make water-soluble tocopherol emulsion which can be applicable directly in water. The molecular weight of tocopherol was 340 to 360 and tocopherol emulsion model was decided as O/O/W/W type. In correlation between stability of emulsion and surface tension, the stability in surface tension of emulsion was from 40 to 46 dyne/cm. In the case of lower than 40 dyne/cm of surface tension, the stability of the emulsion was lower. Lipophilic surfactants, especially for a polyglycerine polyricinoleate in 20%, 30% and 40% tocopherol emulsion, was the most effective in emulsion stability. A higher stability of the emulsion among hydrophilic surfactants in the tocopherol emulsion was obtained in the following order; polyglycerine monostearate> polyglycerine monooleate> polyoxyethylene (20) sorbitan monooleate$\geq$ polyoxyethylene (20) sorbitan monolaurate.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.3
• /
• pp.67-75
• /
• 1998

Polyoxyethylene monooleate was prepared by addition of ethylene oxide to oleic acid. And also, polyoxyethylene monooleate type oil dispersant was prepared by blending polyoxyethylene monooleate, n-paraffine, sorbitan monooleate, sorbitan monopalmitate, and palm oil. Dispersion efficiency test was carried out by vertical shaking flask and swirling flask methods. Low toxic oil dispersant was prepared with polyoxyethylene monooleate, which has high biodegradability and excellent dispersion efficiency on crude oils and weathered W/O emulsions with high viscosity, and its dispersion efficiency was measured to various crude oils and weathered oils.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.510-516
• /
• 1997

O/W emulsions were prepared by adding water to the solution containing amphiphilic resin and the mixed emulsifier of cetyl alcohol polyoxyethylene(20) sorbitan monooleate. Phase behavoir of these emulsions was studied at various HLB(Hydrophilic Lipophilic Balance) values and temperatures. The polar oil emulsion containing the amphiphilic resin showed improved phase stability at various temperatures. Model compounds which contain one of the functional groups in the amphiphilic resin were used in the polar oil phase in order to study the effect of interaction between the functional group and the emulsifier on the phase stability of emulsion. These model compound emulsions showed the phase stability order of poly(acrylic acid)

• Journal of the Korean Ceramic Society
• /
• v.34 no.12
• /
• pp.1205-1212
• /
• 1997

The matrices which consisted of SiC whisker, PES(polyesterasulfone) as a binder, span 80(sorbitan monooleate) as a surfactant, TPP(triphenyl phosphate) as a plasticizer and dichloromethane as a solvent, have been prepared by the various methods such as tape casting, rolling, tape cast-coating and roll-coating method. The fuel cells of single stack type using these matrices are characterized by ac impedance spectroscopy and cyclic voltammetry technique. A fuel cell using a matrix prepared by the tape cast-coating method shows the best performance of 466.34 mA/$\textrm{cm}^2$ at 0.6V because it has the lowest polarization resistance at the interface between electrodes and a matrix due to the largest three phase contact region of gases, catalyst and electrolyte.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.3
• /
• pp.204-211
• /
• 2003

Poly(oxypropylene-oxyethylene glycol) block copolymer(PBC) oil dispersant, which has low toxicity, high biodegradability, and an excellent dispersion efficiency to crude oils and weathered W/O emulsion was prepared by blending PBC, poly(oxyethylene) oleate, and sorbitan monooleate. The dispersing efficiency was measured by swirling flask method. The PBC oil dispersant had an excellent dispersing efficiency to weathered oil products formed as stable W/O emulsion, and the low toxicity, such as 4000 ppm to Oryzias Latipes(24 hr, TLM), Brine Shrimp Artemia(24 hr, TLM).

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.2
• /
• pp.75-83
• /
• 1995

1, 3-Di(2-dodecanoylaminoethyl)-2, 7-dioxy-1, 3, 6, 8-tetraazacyclodecane[DDTD] and sorbitan monostearate(SMS) were synthesized as a main component for softner. O/W type softner(DSA) was prepared by blending of DSA, SMS, polyoxyethylene(10) castor oil, glyceryl monooleate, and polyoxyethylene(7) stearyl ether. After treatment of DSA to all cotton fabrics, the physical properties such as tear strength, crease recovery, and flexing abrasion resistance were measured. As a result of the measurement, DSA was found to be durable softner with good softness.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.96-98
• /
• 2000

Column experiments were peformed to evaluate the efficiency of surfactant flushing for remediation of non-aqueous phase liquid (NAPL) in the soil under controlled conditions. In column experiment less than 0.1 % of the original mass of tetrachloroethylene (PCE), remained in the column after 15 pore volumes of 1% sorbitan monooleate solution were passed through columns. To determine the influence of soil parameters that may affect the remediation process, column tests were repeated with different values of grain size, application rate, surfactant type, surfactant concentration, and solution viscosity (polymer mixed with surfactant). Experimental works suggest that surfactant flushing has a great potential to rapidly remove mass from NAPL in the soil.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.226.3-227
• /
• 2003

A cationic lipid emulsion (o/w) containing lipiodol and 1, 2-dioleoyl-sn- glycero-3-trimethylammonium-propane (DOTAP) has been prepared as a gene delivery system. In order to increase the transfection efficiency of the lipiodol emulsion, 1 2-dioleoyl-sn-glycero-3-phospho-ethanolamine (DOPE) and polyoxyethylene sorbitan monooleate (Tween 80) were incorporated as additional lipids. By including DOPE and Tween 80, the cationic emulsion became a more potent gene carrier under in vitro condition in the presence of serum, and under in vivo condition. (omitted)

• Journal of Soil and Groundwater Environment
• /
• v.7 no.4
• /
• pp.77-86
• /
• 2002

Surfactant enhanced in-situ soil flushing was performed to remediate the soil and groundwater at an oil contaminated site, where had been used as a military vehicle repair area for 40 years. A section from the contaminated site (4.5 m $\times$ 4.5 m $\times$ 6.0 m) was selected for the research, which was composed of heterogeneous sandy and silt-sandy soils with average $K_d$ of 2.0$\times$$10^{-4}$cm/sec. Two percent of sorbitan monooleate (POE 20) and 0.07% of iso-prophyl alcohol were mixed for the surfactant solution and 3 pore volumes of surfactant solution were injected to remove oil from the contaminated section. Four injection wells and two extraction wells were built in the section to flush surfactant solution. Water samples taken from extraction wells and the storage tank were analyzed on a gas-chromatography (GC) for TPH concentration in the effluent with different time. Five pore volumes of solution were extracted while TPH concentration in soil and groundwater at the section were below the Waste Water Discharge Limit (WWDL). The effluent TPH concentration from wells with only water flushing was below 10 ppm. However, the effluent concentration using surfactant solution flushing increased to 1751 ppm, which was more than 170 times compared with the concentration with only water flushing. Total 18.5 kg of oil (TPH) was removed from the soil and groundwater at the section. The concentration of heavy metals in the effluent solution also increased with the increase of TPH concentration, suggesting that the surfactant enhanced in-situ flushing be available to remove not only oil but heavy metals from contaminated sites. The removal efficiency of surfactant enhanced in-situ flushing was investigated at the real contaminated site in Korea. Results suggest that in-situ soil flushing could be a successful process to remediate contaminated sites distributed in Korea.